New CAT Equipment
TL943 Telehandler
Get a Quote
Product Specs
Engine
| Engine Model | Cat® C3.6L |
| Gross Power - Basic | 73.7 HP |
| Gross Power - Premium | 111 HP |
| Note | *Meets U.S. EPA Tier 4 Final emission standards. |
Weights
| Operating Weight | 25750 lb |
Operating Specifications
| Rated Load Capacity | 9000 lb |
| Maximum Lift Height | 43 ft |
| Capacity at Maximum Lift Height | 7000 lb |
| Capacity at Maximum Reach | 1200 lb |
| Maximum Forward Reach | 31 ft |
| Top Travel Speed | 18 mile/h |
Dimensions
| Height | 8.16 ft |
| Width | 8 ft |
| Wheel Base | 11.25 ft |
| Length - Fork Face | 20.5 ft |
| Ground Clearance | 17 in |
| Turning Radius - Over Tires | 12 ft |
Tires
| Standard | 370/75-28 Duraforce Air |
| Optional (1) | 370/75-28 Duraforce Foam Fill |
| Optional (2) | 315/95-28 Telemaster Solid |
| Optional (3) | 14.00-24 16PR Air |
| Optional (4) | 14.00-24 12PR Foam |
| Optional (5) | 370/75-28 Non-Marking Air |
| Optional | 370/75-28 Non-Marking Foam |
Service Refill Capacities
| Fuel Tank | 38 gal (US) |
| Hydraulic System | 47 gal (US) |
| Diesel Exhaust Fluid | 5.7 gal (US) |
Boom Performance
| Boom Up | 9.9 s |
| Boom Down | 8.5 s |
| Tele In | 14.6 s |
| Tele Out | 14.5 s |
| Drawbar Pull - Premium | 25589 lb |
Braking System
| Parking Brake | Spring-applied hydraulic release on front axle |
Brakes
| Features | Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle |
Operator Station
| Features | Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab |
Instrumentation
| Features | Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge |
Work Tools
| Carriages - Swing | 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) |
| Carriages - Standard Tilt | 50 in |
| Pallet Forks - Option 2 | [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) |
| Carriages - Side Shift | 50 in |
| Carriages - Dual Fork Positioning | 50 in |
| Pallet Forks - Option 1 | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) |
| Lumber Forks - Option 1 | [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) |
| Cubing Forks | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) |
| Pallet Forks - Option 3 | [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) |