New CAT Equipment
TL642 w/StabilizersTelehandler
Get a Quote
Product Specs
Engine
| Engine Model | Cat® C3.6L |
| Gross Power - Basic | 73.7 HP |
| Note | Meets U.S. EPA Tier 4 Final emission standards. |
Weights
| Operating Weight | 22928 lb |
Operating Specifications
| Rated Load Capacity | 6500 lb |
| Maximum Lift Height | 42 ft |
| Load at Maximum Height - Stabilizers Down | 6500 lb |
| Maximum Forward Reach | 30 ft |
| Load at Maximum Reach - Stabilizers Down | 1700 lb |
| Top Travel Speed | 19 mile/h |
Dimensions
| Height | 8 ft |
| Width | 8 ft |
| Wheel Base | 11.25 ft |
| Length - Fork Face | 18.5 ft |
| Ground Clearance | 17 in |
| Turning Radius - Over Tires | 12 ft |
Tires
| Standard | 370/75-28 Duraforce Air |
| Optional (1) | 370/75-28 Duraforce Foam Fill |
| Optional (2) | 315/95-28 Telemaster Solid |
| Optional (3) | 13.00-24 16PR Air |
| Optional (4) | 13.00-24 12PR Foam |
| Optional (5) | 370/75-28 Non-Marking Air |
| Optional | 370/75-28 Non-Marking Foam |
Hydraulic System
| Pump Type | Single-section |
Service Refill Capacities
| Fuel Tank | 38.3 gal (US) |
| Hydraulic System | 42 gal (US) |
Boom Performance
| Boom Up | 15.5 s |
| Boom Down | 10.7 s |
| Tele In | 11.8 s |
| Tele Out | 17 s |
| Drawbar Pull - Basic | 20670 lb |
Braking System
| Parking Brake | Spring-applied hydraulic release on front axle |
Brakes
| Features | Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle |
Operator Station
| Features | Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab |
Instrumentation
| Features | Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge |
Work Tools
| Cubing Forks | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) |
| Carriages - Side Shift | 50 in |
| Pallet Forks - Option 1 | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) |
| Carriages - Swing | 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) |
| Carriages - Standard Tilt | 50 in |
| Lumber Forks - Option 1 | [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) |
| Pallet Forks - Option 2 | [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) |
| Carriages - Dual Fork Positioning | 50 in |
| Pallet Forks - Option 3 | [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) |