New CAT Equipment

R3000H Underground Mining Loader

Our largest underground loader, the Cat^® R3000H is a low-cost specialist. Designed for the largest underground mines, it’s a super-productive, durable machine that delivers high performance and long life to lower cost per ton and overall cost of ownership. Safety comes standard, with most safety features built in — including an Operator Present System that protects the machine and operator from uncontrolled machine movements. Its 100% Caterpillar designed and manufactured powertrain components deliver top reliability and performance. And its durable frame and components combine with improved serviceability to deliver the high uptime you demand.

Get a Quote

Watch

Engine

Engine Model	Cat^® C15
Engine Power - Tier 3 Engine - ISO 14396:2002	401 HP
Engine Power - VR Engine - ISO 14396:2002	401 HP
Bore	5.4 in
Stroke	6.8 in
Displacement	927.6 in³
Note (1)	Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (2)	All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (7.05-7.09 lb/gal @ 59° F) and fuel inlet temperature 40° C (104° F).
Note (3)	No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines.
Note (4)	Optional Ventilation Reduction package available.
Note (5)	Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.

Operating Specifications

Nominal Payload Capacity	44092 lb
Gross Machine Mass	180779 lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal	104199 lb
Static Tipping Full Turn Ahead Lift Arms Horizontal	88191 lb
Breakout Force - SAE	61773 lb

Weights

Operating Mass*	128448 lb
Operating Mass* - Front Axle	54558 lb
Operating Mass* - Rear Axle	73853 lb
Operating Mass + Rated Payload*	172540 lb
Operating Mass + Rated Payload* - Front Axle	125187 lb
Operating Mass + Rated Payload* - Rear Axle	47316 lb
Note	*Calculated weight.

Transmission

Forward - 1	3 mile/h
Forward - 2	5.7 mile/h
Forward - 3	10.2 mile/h
Forward - 4	17.5 mile/h
Reverse - 1	4.1 mile/h
Reverse - 2	7.1 mile/h
Reverse - 3	12.7 mile/h
Reverse - 4	19.4 mile/h

Hydraulic Cycle Times

Raise	8.8 s
Dump	1.85 s
Lower, Empty, Float Down	3.54 s
Total Cycle Time	14.2 s

Bucket Capacities

Bucket Capacities	8.9-11.6 m³ (11.6-15.2 yd³)
Dump Bucket - 1 - Standard Bucket	11.6 yd³
Dump Bucket - 2	12.4 yd³
Dump Bucket - 3	13.7 yd³
Light Material Bucket	15.2 yd³

Turning Dimensions

Outside Clearance Radius**	296.7 in
Inner Clearance Radius**	127.8 in
Axle Oscillation	8 °
Articulation Angle	42.5 °
Note	**Clearance dimensions are for reference only.

Tires

Tire Size

35/65 R33

Service Refill Capacities

Engine Crankcase	9 gal (US)
Transmission	16.4 gal (US)
Hydraulic Tank	37 gal (US)
Cooling System	19.8 gal (US)
Front Differential and Final Drives	31.4 gal (US)
Front Differential and Final Drives - With Axle Oil Cooling System	42 gal (US)
Rear Differential and Final Drives - With Axle Oil Cooling System	44.1 gal (US)
Fuel Tank	406.5 gal (US)
Rear Differential and Final Drives	33.5 gal (US)

Standards

Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab

Recommended Searches:

Commitments