New CAT Equipment

G3606 A4 Gas Engine

G3600 ADEM4 engines provide a wide range of power options to fit your gas compression application. G3600 ADEM4 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 ADEM4 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3600 ADEM4 engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3606 ADEM4 Gen 1 gas engine with standard ratings: 1398 bkW (1875 bhp) @ 1000 rpm and ADEM4 Gen 2 gas engine standard ratings: 1454 bKW (1950 hp) and uprated ratings - 1499 bKW (2010 bhp) @ 1000 rpm. NSPS site compliant capable.

Get a Quote

  • Capacity for Liquids
    Cooling System
    124 gal (US)
    Lube Oil System - Refill
    187 gal (US)
  • Engine Specifications
    Aspiration
    Turbocharged-Aftercooled
    Bore
    11.8 in
    Compression Ratio
    9.2:1 Gen 1 (7:6:1 Gen 2)
    Displacement
    7762 in³
    Emissions
    Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx
    Flywheel Teeth
    255
    Height
    116.16 in
    Ignition, Protection
    Electronic (ADEM A4)
    Length
    167.33 in
    Maximum Rating
    2065 BHP
    Minimum Rating
    1900 BHP
    Oil Change Interval
    5000 hours
    Rated Speed
    1000 rpm
    Rotation from Flywheel End
    Counterclockwise
    Stroke
    11.8 in
    Weight - Dry
    36883 lb
    Width
    86.17 in
Air Inlet System
  • Air cleaners
  • Air Inlet Adapter
Control System
  • ADEM4
Cooling System
  • ANSI Class 150 4 inch Flange (outlet water connection)
  • ANSI Class 150 6 inch Flange (Inlet Water connection)
  • Engine driven Water pump
  • Water Jacket Outlet Regulator 88° C
Engine Rating
  • Engine rating and speed selection
Exhaust System
  • Hard heat shielded exhaust manifold
  • Vertical exhaust outlet
Flywheel and Flywheel Housing
  • Flywheel. SAE Standard
Fuel System
  • ANSI Class 150 2 inch Flange ( Customer Connect)
  • Fuel Filter
  • Gas pressure regulator
General
  • Paint
  • Wood Skid
Insrumentation
  • Basic HMI Engine Interface
Lube System
  • Oil pan
  • Oil filter
  • Oil supply line
  • Breathers
  • Closed Crankcase Ventilation System
  • Engine Driven oil pump
  • Front and Rear Oil Drains
  • Prelube Pump
Mounting System
  • Engine mounting feet (4)
  • Two lifting eyes
Power Take-offs
  • Damper Guard
  • Single Damper
Protection System
  • Crankcase explosion relief valve
Starting System
  • Engine Barring Device
  • Starting Motor
Charging System
  • Alternator
Exhaust System
  • Exhaust expander
  • Weld Flange
Fuel System
  • Fuel Connections
General
  • Language Decals
  • Service Pump
  • Service Tools
Lube System
  • Lubricating Oil
  • Oil Level Regulator
Mounting System
  • Mounting Plates
Power Take-offs
  • Stub shaft
Telmatic System
  • Cat Connect Technology
Telematic System
  • Cell - Satellite radio
  • Interconnect Harness
  • LAN Adapter
  • Product Link Extention Harness