New CAT Equipment
D80 GC Generator Set
Get a Quote
Saves up to 17% Installed Space
Requires less space for installation; leaves more room for your on-going operations
Spare Parts 98% Fulfillment within 24 hours
World's best product support network ensures spare parts are readily available for maintenance and service needs
Reliability tested for 500 Hours
Ensures you can count on emergency power when it is needed
-
Engine Specifications
Aspiration
TurbochargedBore
4.1 inCompression Ratio
16.7:1Displacement
269 in³Engine Model
C4.4, In-line 4, 4-cycle dieselFuel System
Common RailGovernor Type
Mechanical, ADEM™A4Stroke
5 in -
Generator Set Dimensions
Dry Weight - Genset (maximum)
950 lbHeight - Maximum
52.9 inLength - Maximum
82.6 inWidth - Maximum
43.3 in -
Generator Set Specifications
Duty Cycle
StandbyEmissions/Fuel Strategy
U.S. EPA Cert., Tier 3Frequency
60 HzMaximum Rating
80 ekWMinimum Rating
80 ekWSpeed
1800 rpmVoltage
208 to 600 Volts
Air Inlet System
- Air cleaner; light duty with disposable element
- Air cleaner
Cooling System
- Radiator and cooling fan with guards
- Fan drive, battery charging alternator drive
- Caterpillar extended life coolant
- Coolant drain line with valve
Control Panel
- GCCP 1.2 Control panel
Exhaust System
- Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose
Fuel System
- Standard open set fuel tank/base supplied base, formed steel with single wall integral 24-hour fuel tank
Generator
- Circuit breaker, IEC, 3 pole, mounted in tower panel
- Voltage regulator (single phase sensing)
- IP23 Protection
- Segregated low voltage (AC/DC) wiring panel
- 12 Leads
- Tower panel, IP22, bottom cable entry
Governing System
- Mechanical and electrical governing system - model dependent
Lube System
- Lubricating oil
- Oil drain line with valve
Mounting System
- Includes lifting provision and drag points
- Termination points for coolant and lube oil drain lines
- Captive linear vibration isolators between base and engine-generator
Starting/Charging System
- Batteries
- 24V battery with rack and cables
General
- Engine and alternator pre-paint, Caterpillar yellow
Alternator System
- 3 Phase sensing
- Anti-condensation heater
- R Frame auxilliary winding
- Permanent magnet excitation (PMG)
Circuit breakers
- Circuit breaker upgrades - 4 Pole circuit reaker to 250A, 400A and 630 A
Cooling System
- Low coolant level shutdown
- Coolant heater
- Low coolant temperature alarm
Control Panel Options
- Earth fault (2 wire only)
- Overload shutdown via breaker
- Earth leakage (2 wire only)
- Volt free contacts
- Panel mounted audible alarm
- Battery charger
- GCCP 1.2 Control panel
- Control panel heater
- Voltage adjust potentiometer
- Emergency stop with key
- Speed adjust potentiometer
Enclosures
- Sound attenuated Level 2 enclosure
Fuel System
- High fuel level alarm
- Open set narrow tankbase
- Low fuel level alarm
- Bunded fuel tank
- Low fuel level shutdown
- Compact skidbase for open set
- Skidbase for CALG enclosure sets
Global Certifications
- Certification for CIS
Mounting Options
- Battery removal
- Industrial silencer
- Electronic governor
- External single point lift - enclosure
- Silencer installation kit
Special Packing/Inspectons for Shipment
- PGS Test report @ 1.0 power factor
- PGS Test report @ 0.8 power factor
General - Accessories / Miscellaneous
- Stone guards/rad trans flange
- Packing case - canopied set
- Packing case - compact set