New CAT Equipment

D6 XE Dozer

The new Cat® D6 XE is the world’s first high drive Electric Drive dozer, offering you the highest level of productivity, fuel efficiency and ease of operation. With next-generation Electric Drive technology there are no gears to shift, so you experience constant power to the ground, greater agility and faster cycle times. Put more profit in your pocket too, with up to 35 percent better fuel efficiency and reduced service/maintenance costs. The broadest range of technology features in the industry work together seamlessly to help you make the most of your equipment investment.

Get a Quote

    Learn more about the D6 XE Dozer

    Watch

    Product Specs

    Engine

    Engine Model Cat C9.3B
    Power - Net 215 HP
    Net Power - Rated - ISO 9249/SAE J1349 215 HP
    Net Power - Rated - ISO 9249/SAE J1349 (DIN) 219 mhp
    Emissions U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 4 Final
    Build Number 20B
    Note (1) Rated horsepower at 1,700 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Net power is tested per ISO 9249:2007 and SAE J1349:2011.
    Note (2) All non-road Tier 4 Interim and Final, Stage IIIB, IV and V and Korea Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20 blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
    Note (3) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
    Note (4) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full D6/D6 XE Technical Specifications.

    Weights

    Operating Weight 51333 lb

    Transmission

    Power Train Electric Drive

    Service Refill Capacities

    Fuel Tank 90 gal (US)
    DEF Tank 7.4 gal (US)

    D6 XE Push Arm

    Operating Weight 49388 lb
    Ground Pressure 8 psi
    Width of Standard Shoe 24 in
    Blade Semi-Universal (SU)
    Blade Capacity 7.5 yd³

    D6 XE LGP (30-in) Push Arm

    Operating Weight 51020 lb
    Ground Pressure 6.6 psi
    Width of Standard Shoe 30 in
    Blade Semi-Universal (SU)
    Blade Capacity 7.6 yd³

    D6 XE LGP (36-in) Push Arm

    Operating Weight 53315 lb
    Ground Pressure 5.3 psi
    Width of Standard Shoe 36 in
    Blade Straight
    Blade Capacity 5 yd³

    D6 XE VPAT

    Operating Weight 49708 lb
    Ground Pressure 7.2 psi
    Width of Standard Shoe 24 in
    Blade VPAT
    Blade Capacity 5.4 yd³

    D6 XE LGP (30-in) VPAT

    Operating Weight 51333 lb
    Ground Pressure 5.9 psi
    Width of Standard Shoe 30 in
    Blade VPAT
    Blade Capacity 5.9 yd³

    D6 XE LGP (36-in) VPAT

    Operating Weight 52512 lb
    Ground Pressure 5.1 psi
    Width of Standard Shoe 36 in
    Blade VPAT
    Blade Capacity 6.5 yd³

    Air Conditioning System

    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.