New CAT Equipment

D2 Dozer

The Cat® D2 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Get a Quote

    Learn more about the D2 Dozer

    Watch

    Product Specs

    Engine

    Engine Model Cat® C3.6
    Power - Net 92 HP
    Displacement 220 in³
    Net Power - 2,200 rpm - SAE J1349 92 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 92 HP
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

    Engine 

    Power Train  Hydrostatic

    Weights

    Operating Weight 18382 lb
    Operating Weight - LGP 19066 lb
    Note (2) For machine with ripper, add 554 kg (1,222 lb).
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

    Weights 

    Operating Weight 18382 lb

    Cab

    FOPS ISO 3449:2005 Level II
    ROPS ISO 3471:2008

    Transmission

    Drive Pumps 1
    Maximum Travel Speed - Forward 5.6 mile/h
    Relief Valve Settings 7033 psi
    Maximum Travel Speed - Reverse 6.2 mile/h
    Track Motors 2

    Undercarriage

    Length - Track on Ground - LGP 89 in
    Track Gauge 61 in
    Number of Rollers - Each Side 7
    Track Gauge - LGP 68 in
    Ground Pressure - LGP 4.3 psi
    Shoe Width - Standard 18 in
    Shoe Width - LGP 25 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43

    Undercarriage 

    Number of Shoes - Each Side - Abrasion Undercarriage  38
    Ground Pressure  5.7 psi
    Length of Track on Ground  89 in

    Service Refill Capacities

    Fuel Tank 51.5 gal (US)
    Crankcase - With Filter 2.8 gal (US)
    Final Drive - Each - LGP 2.6 gal (US)
    Cooling System 5 gal (US)
    Transmission - Hydraulic Tank 23.8 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US)

    Service Refill Capacities 

    Final Drives - Each Side  2.6 gal (US)

    Hydraulic Controls

    Pump Output 17.2 gal/min
    Relief Valve Settings 2988 psi

    Ripper

    Type Parallelogram
    Number of Shanks 3
    Height 6.5 in
    Weight 1222 lb
    Maximum Digging Depth 13.3 in
    Maximum Ground Clearance Under Tip 17.6 in
    Overall Width 67.3 in
    Maximum Reach - Ground Line 30.2 in

    Air Conditioning System

    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Dimensions

    BLADE: Digging Depth - LGP 23.2 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
    BLADE: Blade Lift Height - LGP 27.9 in
    BLADE: Blade Width - LGP 124 in
    BLADE: Blade Width at Maximum Angle - LGP 113.1 in
    Track Gauge - LGP 67.9 in
    Ground Clearance - LGP 13 in
    BLADE: Blade Height - LGP 35.8 in
    Overall Length - With Blade - LGP 168.2 in
    BLADE: Blade Capacity (SAE) - LGP 2.42 yd³
    BLADE: Maximum Tilt - LGP 17.2 in
    BLADE: Maximum Angle (either side) - LGP 25°
    Note Abrasion Undercarriage
    Length of Basic Dozer (without blade) - LGP 129.5 in
    Width of Dozer (standard shoes, no blade) - Standard 79.1 in
    Dozer Height - LGP 108.9 in
    Dozer Height - Standard 108.9 in
    Width of Dozer (standard shoes, no blade) - LGP 92.9 in
    Length of Basic Dozer (without blade) - Standard 129.5 in

    Dimensions 

    BLADE: Maximum Angle (either side) - Standard  25°
    Ground Clearance - Standard  13 in
    Overall Length - With Blade - Standard  168.5 in
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58°
    BLADE: Maximum Tilt - Standard  15.2 in
    Track Gauge - Standard  61 in
    BLADE: Digging Depth - Standard  23.3 in
    BLADE: Blade Width - Standard  109.5 in
    BLADE: Blade Lift Height - Standard  29.3 in
    BLADE: Blade Capacity (SAE) - Standard  2.59 yd³
    BLADE: Blade Width at Maximum Angle - Standard  100.1 in
    Note  With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
    BLADE: Blade Height - Standard  39.8 in

    Retrieval Winch

    Maximum Line Speed - Full Drum 79 ft/min
    Maximum Line Speed - Bare Drum 50 ft/min
    Weight 1747 lb
    Drum Capacity - Optional Cable 195 ft
    Rope Diameter - Recommended 0.63 in
    Winch Drive Hydraulic
    Rope Diameter - Optional 0.75 in
    Drum Capacity - Recommended Cable 277 ft
    Maximum Line Pull - Full Drum 20350 lb
    Speed Variable
    Maximum Line Pull - Bare Drum 32150 lb
    Control Hydraulic
    Overall width 27.91 in
    Drum Width 9.65 in
    Drum Diameter 8 in
    Winch Length 35.63 in
    Throat Clearance 5.6 in

    High Performance Winch

    Maximum line pull – bare drum 40000 lb
    Drum capacity – recommended cable 371 ft
    Winch length 27.76 in
    Overall width 29.2 in
    Control Hydraulic
    Maximum line speed – bare drum 131 ft/min
    Maximum line speed – full drum 207 ft/min
    Drum width 10.8 in
    Drum capacity – optional 256 ft
    Throat clearance 6.75 in
    Weight 1345 lb
    Rope diameter – recommended 0.63 in
    Speed Variable
    Maximum line pull – full drum 25000 lb
    Drum diameter 10 in
    Rope diameter – optional 0.75 in
    Winch drive Hydrostatic