New CAT Equipment

D11 Dozer

The Cat ® D11 Dozer delivers higher productivity at lower cost — for a reduction of up to 6% in overall cost per bank cubic meter compared to the previous model. Infused with performance-enhancing features, the D11 helps you improve the efficiency of your dozing operation. The torque divider with stator clutch automatically frees up the stator when torque is not required, delivering higher drivetrain efficiency for reduced fuel consumption. High-horsepower reverse speeds up non-productive traveling to reduce cycle time, while load-sensing hydraulics deliver more power to the dozer, increasing responsiveness and boosting fuel efficiency. Advanced technologies are completely integrated into the dozer, creating smart machines and more informed operators to maximize the productivity of your operation.

Get a Quote

    Learn more about the D11 Dozer

    Watch

    Product Specs

    Engine - U.S. EPA Tier 4 Final/EU Stage V

    Engine Model Cat® C32
    Engine Power - Net SAE J1349/ISO 9249 - Forward 850 HP
    Displacement 1959 in³
    Engine Power - Net SAE J1349/ISO 9249 - Reverse 955 HP
    Note (1) *Excludes all fan losses.
    Note (2) Engine ratings apply at 1,800 rpm.
    Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.

    Engine - U.S. EPA Tier 2 Equivalent

    Engine Model Cat® C32
    Displacement 1959 in³
    Engine Power - Net SAE J1349/ISO 9249 - Forward 850 HP
    Engine Power - Net SAE J1349/ISO 9249 - Reverse 957 HP
    Note (1) *Excludes all fan losses.
    Note (2) Engine ratings apply at 1,800 rpm.
    Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.

    Fuel Tank Capacities

    Fuel Tank - Total Volume 500 gal (US)
    Fuel Tank - Usable Volume 475 gal (US)

    Service Refill Capacities

    Cooling System 46.8 gal (US)
    Cooling System Refill - Tier 2 Equivalent Engine 41.7 gal (US)
    Engine Crankcase 35.1 gal (US)
    Power Train 120 gal (US)
    Power Train - Refill Volume 103.3 gal (US)
    Final Drive - Each 12.4 gal (US)
    Roller Frames - Each 24.8 gal (US)
    Hydraulic Tank 42.2 gal (US)
    Hydraulic System Tank and Chassis 64.7 gal (US)
    Hydraulic System Chassis + Blade and Ripper (Standard) 117.6 gal (US)
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) 143.4 gal (US)

    Weights

    Operating Weight 229800 lb
    Operating Weight - Carrydozer 250665 lb
    Note (1) D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
    Note (2) D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.

    Hydraulic Controls

    Pump Type Variable displacement piston pump
    Combined Pump Output - Implement 177 gal/min

    Undercarriage

    Shoe Type Extreme Service
    Width - Shoe 28 in
    Width - Shoe - CD 36 in
    Shoes/Side 41
    Grouser Height 4 in
    Pitch 12.5 in
    Ground Clearance* 30.6 in
    Track Gauge 114 in
    Length - Track on Ground 175 in
    Ground Contact Area 9781 in²
    Ground Contact Area - CD 12605 in²
    Track Rollers/Side 8
    Number of Carrier Rollers 1 per side (optional)

    Air Conditioning System

    Note (1) The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)

    Standards

    ROPS Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
    FOPS Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
    Sound (1) The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
    Sound (2) The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).

    Transmission

    1.0 Forward 2.5 mile/h
    2.0 Forward 4.4 mile/h
    3.0 Forward 7.6 mile/h
    1.0 Reverse 3 mile/h
    2.0 Reverse 5.3 mile/h
    3.0 Reverse 9.1 mile/h
    Drawbar Pull - 3 Forward 46250 ft·lbf
    Drawbar Pull - 1 Forward 148200 ft·lbf
    Drawbar Pull - 2 Forward 82300 ft·lbf

    Blades

    Semi-Universal (SU)* Capacity 35.6 yd³
    Semi-Universal (SU)* Width Over Endbits 219.8 in
    U-Blade Capacity 45 yd³
    U-Blade Width 249.6 in
    Reclamation Universal - Blade capacity (SAE J1265) 55 yd³
    Reclamation Universal - Width with blade (over end bits) 251.8 in
    Carry Dozer - Blade capacity (SAE J1265) 57 yd³
    Carry Dozer - Width with blade (over end bits) 263.9 in

    Ripper - Single Shank

    Maximum penetration force * (shank vertical) 66000 lb
    Maximum penetration depth (standard tip) 63.5 in
    Pryout Force 148510 lb

    Ripper - Single Shank, Deep Ripping

    Maximum penetration force * (shank vertical) 66110 lb
    Maximum penetration depth (standard tip) 85.5 in
    Pryout Force 148510 lb

    Ripper - Multi-Shank, Adjustable Parallelogram

    Overall Beam Width 131.1 in
    Maximum Penetration Force - Shank Vertical 77350 lb
    Maximum Penetration - Standard Tip 43.3 in
    Pry-Out Force - Multi-Shank Ripper with One Tooth 145640 lb

    Dimensions - D11

    Ground Clearance* 31.4 in
    Track Gauge 114 in
    Width at Outside of Track (710 mm Track Shoe) 142 in
    Height (ROPS/canopy)* 185.9 in
    Length of Track on Ground 175 in
    Length with SU-Blade** - No rear attachment 337.8 in
    Overall Length SU-Blade and SS Ripper** 414.4 in
    Note *Includes grouser height for total dimensions on hard surfaces.

    Dimensions - D11 Carrydozer

    Width at Outside of Track (710 mm Track Shoe) 149.8 in
    Length with SU-Blade** - No rear attachment 345.1 in
    Overall Length SU-Blade and SS Ripper** 421.7 in