New CAT Equipment

D10 Dozer

Innovation on Track

The Cat® D10 Dozer is innovative by design — developed by a team of experts who follow a design approach that incorporates feedback from the field with industry-leading technologies to deliver a dozer that continues to advance with every model. The new D10 is no exception. It’s more efficient, so it burns less fuel. It’s more serviceable, so you’ll experience less downtime. It’s more durable, so you’ll spend less over its lifetime. And it’s more productive — so you’ll spend less time putting more profitability to your bottom line.

Get a Quote

    Fabick Cat needs this information to contact you about our products and services. You may unsubscribe from communications at any time. For more information, please review our Privacy Policy.

    Benefits

    Up to 6% More Efficient & 4% Less Fuel Consumption

    With stator clutch torque converter, single plane cooling and load-sensing hydraulics

    Infused with Proven Technologies

    Improved operator interface, AutoCarry and AutoRip, remote-control-ready and updated electronic architecture

    Up to 8% Reduction in Maintenance & Repair

    Less downtime and reduced costs thanks to longer component life and improved serviceability

    Learn more about the D10 Dozer

    Watch

    • Air Conditioning System
      Air Conditioning
      The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.
    • Blades
      10SU ABR - Capacity (SAE J1265)
      24.2 yd³
      10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
      30.08 in³
      10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
      19.98 in
      10SU ABR - Digging Depth - Blade Pitch: Nominal
      25.23 in
      10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
      53.86 in
      10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
      66.14 in
      10SU ABR - Ground Clearance - Maximum Tilt LH
      56.3 in
      10SU ABR - Ground Clearance - Maximum Tilt RH
      56.3 in
      10SU ABR - Height
      83.5 in
      10SU ABR - Width (over end bits)
      194.5 in
      10U ABR - Capacity (SAE J1265)
      28.7 yd³
      10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
      30.1 in
      10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
      19.98 in
      10U ABR - Digging Depth - Blade Pitch: Nominal
      60 in
      10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
      53.9 in
      10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
      66.1 in
      10U ABR - Ground Clearance - Maximum Tilt LH
      60.8 in
      10U ABR - Ground Clearance - Maximum Tilt RH
      60.8 in
      10U ABR - Height
      83.5 in
      10U ABR - Weights - Blade Weight*
      23585 lb
      10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)
      154888 lb
      10U ABR - Width (over end bits)
      207.1 in
      Note (1)
      Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
      Note (2)
      *Does not include hydraulic controls but includes blade cylinders, pusharms.
      Note (3)
      **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
    • Dimensions (Approximate)
      Ground Clearance*
      28.5 in
      Height - FOPS Cab*
      162.8 in
      Height - ROPS/Canopy*
      173.5 in
      Height - Top of Stack*
      171.5 in
      Length - Track on Ground
      152.8 in
      Length - With Multi-Shank Ripper
      285.1 in
      Length - With SU-Blade
      292 in
      Length - With Single-Shank Ripper
      278.8 in
      Length - With U-Blade
      305.1 in
      Note (1)
      *Includes grouser height for total dimensions on hard surfaces.
      Overall Length - Basic Tractor
      209.6 in
      Overall Length - SU-Blade/SS Ripper
      360.6 in
      Track Gauge
      100.4 in
      Width - Over Trunnions
      148 in
      Width - Without Trunnions - 610 mm/24 in ES
      130.4 in
    • Engine - U.S. EPA Tier 2 Equivalent
      Bore
      5.4 in
      Displacement
      1648 in³
      Emissions
      U.S. EPA Tier 2 Equivalent
      Engine Model
      Cat® C27
      Engine Power - Gross SAE J1995* - Forward
      631 HP
      Engine Power - Gross SAE J1995* - Reverse
      766 HP
      Engine Power - ISO 14396* - Forward
      622 HP
      Engine Power - ISO 14396* - Reverse
      756 HP
      Engine Power - Net SAE J1349/ISO 9249** - Forward
      603 HP
      Engine Power - Net SAE J1349/ISO 9249** - Reverse
      722 HP
      Note (1)
      *Excludes all fan losses.
      Note (2)
      All Engine ratings apply at 1,800 rpm.
      Note (3)
      Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
      Note (4)
      Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
      Note (5)
      **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
      Stroke
      6 in
    • Engine - U.S. EPA Tier 4 Final/EU Stage V
      Bore
      5.4 in
      Displacement
      1648 in³
      Emissions
      U.S. EPA Tier 4 Final/EU Stage V
      Engine Model
      Cat® C27
      Engine Power - Gross SAE J1995* - Forward
      631 HP
      Engine Power - Gross SAE J1995* - Reverse
      766 HP
      Engine Power - ISO 14396* - Forward
      620 HP
      Engine Power - ISO 14396* - Reverse
      754 HP
      Engine Power - Net SAE J1349/ISO 9249** - Forward
      602 HP
      Engine Power - Net SAE J1349/ISO 9249** - Reverse
      722 HP
      Note (1)
      *Excludes all fan losses.
      Note (2)
      All Engine ratings apply at 1,800 rpm.
      Note (3)
      Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
      Note (4)
      Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
      Note (5)
      **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
      Stroke
      6 in
    • FLUID CAPACITIES
      Cooling System Refill – Tier 4 Final Engine
      46.2 gal (US)
      Engine Crankcase Sump
      27.2 gal (US)
      Final Drives (each)
      12.2 gal (US)
      Hydraulic System Tank
      32.2 gal (US)
      Pivot Shaft Oil
      9.5 gal (US)
      Power Train - Refill Volume
      74.8 gal (US)
      Power Train - Total Volume
      81.4 gal (US)
      Track Roller Frames (each)
      16.9 gal (US)
    • Fuel Tank Capacities
      Fuel Tank - Total Volume
      335.2 gal (US)
      Fuel Tank - Usable Volume
      323.3 gal (US)
    • Hydraulic Controls
      Cylinder Sizing - Blade Lift - Bore
      5.5 in
      Cylinder Sizing - Blade Lift - Stroke
      65.1 in
      Cylinder Sizing - Blade Tilt - Bore
      8.3 in
      Cylinder Sizing - Blade Tilt - Stroke
      9.5 in
      Cylinder Sizing - Ripper Shank Angle - Bore
      7.1 in
      Cylinder Sizing - Ripper Shank Angle - Stroke
      26 in
      Cylinder Sizing - Ripper Shank Lift - Bore
      8.3 in
      Cylinder Sizing - Ripper Shank Lift - Stroke
      21.1 in
      Fan Pump
      21.7 gal/min
      Lift Cylinder Relief Valve Setting
      4061.1 psi
      Note (1)
      Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).
      Note (2)
      Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
      Note (3)
      Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
      Pump Output - Implement
      112 gal/min
      Pump Type
      Variable displacement piston
      Ripper - Lift - Relief Valve Setting
      4061.1 psi
      Ripper - Pitch - Relief Valve Setting
      4061.1 psi
      Tank Capacity
      32.2 gal (US)
      Tilt Cylinder Flow - Head End Flow
      63.4 gal/min
      Tilt Cylinder Flow - Rod End Flow
      112 gal/min
      Tilt Cylinder Relief Valve Setting
      3872.5 psi
    • Ripper - Single Shank
      Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
      36 in
      Maximum penetration depth (standard tip)
      59.2 in
      Maximum penetration force * (shank vertical)
      49233 lbf
      Note
      Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
      Weight
      14209 lb
    • Ripper - Single Shank, Deep Ripping
      Maximum penetration depth (standard tip)
      78.3 in
      Maximum penetration force * (shank vertical)
      53055 lbf
      Note
      Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
      Weight
      14548 lb
    • Standards
      FOPS
      Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
      Note
      The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
      Note (1)
      The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
      Note (2)
      The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
      Note (3)
      The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).
      ROPS
      Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
      Sound
      Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
      Sound (1)
      Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
    • Steering and Brakes
      Brake Count
      10
      Brake Diameter
      15.4 in
      Brake Type
      Spring Applied Multiple- Disc Brake
      Steering Type
      Hydraulically Applied Multiple-Disc Steering Clutch
    • Transmission
      1.0 Forward
      2.5 mile/h
      1.0 Reverse
      3.2 mile/h
      1.5 Forward
      3.4 mile/h
      1.5 Reverse
      4.2 mile/h
      2.0 Forward
      4.5 mile/h
      2.0 Reverse
      5.6 mile/h
      2.5 Forward
      6 mile/h
      2.5 Reverse
      7.5 mile/h
      3.0 Forward
      7.8 mile/h
      3.0 Reverse
      9.8 mile/h
      Transmission Clutch Diameter
      17 in
      Type
      Planetary powershift
    • Undercarriage
      Ground Clearance
      28.5 in
      Ground Contact Area
      7347 in²
      Grouser Height
      3.7 in
      Length - Track on Ground
      152.8 in
      Number of Carrier Rollers
      1 per side (optional)
      Pitch
      10.2 in
      Shoe Type
      Extreme Service (ES)
      Shoes/Side
      44
      Track Gauge
      100.4 in
      Track Rollers/Side
      8
      Width - Shoe
      24 in
    • Weights
      Note (1)
      D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
      Note (2)
      D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
      Operating Weight
      154888 lb
      Shipping Weight
      111739 lb
    OPERATOR ENVIRONMENT
    • Air Conditioner and Heater with Automatic Climate Control
    • Seat — Cloth with Air Suspension
    • Cab Glass — Single-Pane Tinted Safety
    • Rollover Protection System (ROPS)/Falling Object Protection (FOPS), Sound-Suppressed Cab
    • High-Definition Primary Touchscreen Display
    • Cab Access – Blade Push Arm Steps and Grab Handle
    • Visibility – Rearview Mirror
    TECHNOLOGY
    • VIMS
    • Cat Product Link Elite (cellular)
    • Automated Blade Assist (ABA)
    POWER TRAIN
    • Stator Clutch Torque Divider – Electronic Control
    • Powershift Transmission – Three-Speed Electronic Shift
    • High-Performance Single-Plane Cooling Package with Aluminum Radiator
    • Cat C27 Engine – U.S. EPA Tier 4 Final or Tier 2 Equivalent
    UNDERCARRIAGE
    • Lifetime-Lubricated Rollers and Idlers
    • Suspension-Type Undercarriage
    • Track Shoe (ES): 610/710/785 mm (24, 28, 31 inch) Width
    HYDRAULICS
    • Electronically Controlled, Load-Sensing Dozer Lift and Tilt
    • Electronically Enabled Blade – Quick Drop
    • Electronically Controlled, Load-Sensing Ripper Lift and Pitch
    • Dozer Blade – Dual Tilt, Guarded Lines
    ELECTRICAL
    • 24V Electric Start
    • Batteries – 2× 200-Amp Hour, 12V
    • Battery Isolation - Single Pole
    • Lights – LED – 13 Positions
    SERVICE AND MAINTENANCE
    • Replaceable Bearings – Push Arm and Ripper
    • Radiator Guard – Swing-Out Access Doors
    • Ground-Level Fast Fuel Fill
    • Ground-Level Electrical Service Station
    • Diagnostic Connector
    • Bottom Guards - Hinged with Release Catch
    • Scheduled Oil Sampling (S·O·S) Fluid Sampling Ports
    • Ecology Fluid Drains – All Compartments
    OPERATOR ENVIRONMENT
    • Cab Glass – Dual-Pane Laminated Impact Safety
    • Visibility – Five Cameras: 360-Degree View and Ripper Camera
    • Cab Glass – High-Pressure Safety (40 psi/275 kPa)
    • MineStar Terrain Display
    • Seat – Heated, Cooled, Adjustable Lumbar and Bolsters
    • Visibility – Dual Camera: Backup and Ripper
    TECHNOLOGY
    • Autocarry
    • Auto Ripper Control
    • Cat Product Link Elite Dual Mode (cellular + satellite)
    • Cat Grade with 3D Blade Control
    • MineStar Terrain Ready
    • MineStar Terrain with Blade Control
    • MineStar Command Remote Control Ready
    POWER TRAIN
    • Hydraulic Cooling Fan – Automatic Reversing
    UNDERCARRIAGE
    • Abrasion Rollers and Idlers
    • Cold Weather Rollers and Idlers
    • Carrier Roller
    • Track Links – Heavy Duty XL – Duralink
    • Track Shoe – Anti-Packing Round Hole
    • Sound-Suppression Undercarriage
    • Track Shoes : 610/710/786 mm (24/28/31 in) Width (various configurations)
    HYDRAULICS
    • Ripper Pin Puller
    ELECTRICAL
    • Lights – LED – Premium Package
    • Battery Isolation – Dual Pole
    SERVICE AND MAINTENANCE
    • Ripper Lubrication – Grouped – Ground-Level Fill
    • Ground-Level – Fluid Fill and Drain Engine, Power Train, Hydraulic and Coolant
    • Sound Reduction Sealed Bottom Guards
    • Ripper Lubrication – Autolube with Ground-Level Fill
    REAR ATTACHMENTS
    • Counterweight – Rear, 3 Weighted Plates
    • No Rear Attachment for customers who already have a rear attachment
    • Ripper – Single Shank with Pin Puller and Retrieval Hitch
    • Ripper – Single Shank with Pin Puller
    • Ripper – Multi Shank (three shank)
    • Counterweight – Rear, 4 Weighted Plates
    • Ripper – Multi Shank Deep with Pin Puller
    BLADES
    • Semi-Universal (18.5 m3/24.2 yd3)
    • Universal (22 m3/28.7 yd3)
    OTHER
    • Fire Suppression Ready
    • Fire Suppression Installed
    WORKTOOLS BLADES
    • Cushion Dozer Blade
    • Coal Universal (52 m3/68 yd3)
    • Black Blade Paint
    • Abrasion Liners and Guards
    • Woodchip Universal (72.6 m3/95 yd3)
    • Reclaimation Universal (24.5 m3/32 yd3)
    • Coal Universal (46.1 m3/60.3 yd3)