New CAT Equipment

Cat XLM Switchgear

The Emergency Transfer and Load management (XLM) product supports transfer between the utility source and generator bus and allows for sustained parallel operation with the utility for load management applications.

Get a Quote

    Fabick Cat needs this information to contact you about our products and services. You may unsubscribe from communications at any time. For more information, please review our Privacy Policy.

    Benefits

    Flexible Operating Modes

    Base Load, Import Setpoint Tracking, Export �Setpoint Tracking, or�Export Limit as well as emergency mode

    Reduced Commissioning Times

    High-speed network connections to Caterpillar Generator Sets reduces field interconnects

    Generator Demand Priority Control

    Automatically match the on-line generator capacity to the loads, and avoid unnecessary operation of generator sets
    • Environmental Parameters
      Certifications
      IBS, CBC, UBC & OSHPD Certified
      Control Panel Enclosure
      NEMA 1 or NEMA 3R, Freestanding Construction
      Low Voltage Standards
      NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70
      Medium Voltage Standards
      NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110
      Operating Temperature
      0 degrees to 50 degrees C
      Storage Temperature
      -20 degrees C to +60 degrees C
    • Generator Protective Devices
      ANSI Protective Devices
      15/25, 27/59, 81 O/U, 32, 40, 50, 51
    • Technical Summary
      Application
      LV and MV ( 208V - 38 kV
      Configuration
      Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie, utility and load breakers for utility paralleling applications
      Modes of Operation
      Emergency Standby, Utility Import/Export, Peak shaving, and base load operations with redundant controls and components. Closed transition to/from generator power
    • Utility Protective Devices
      ANSI Protective Devices
      15/25, 27/59, 81 O/U, 32, 40, 47, 50, 51, 86
    Generator Demand Priority Control
    • Automatically match the on-line generator capacity to the loads, and avoid unnecessary operation of generator sets.
    Data Table Interface
    • Accommodates interface with a building management system for monitoring all system parameters via Modbus RTU or TCP
    Supplemental Hardware Synchronization check relay (ANSI 25 Device)
    • Provides additional discrete synchronization protection
    Remote Power Monitoring System
    • To monitor breaker status, alarms, metering and other operating parameters