New CAT Equipment

Cat® C9.3B Industrial Power Unit

The Cat® C9.3B IPU configuration not only provides the flexibility andoptions found on a standard industrial engine, but also comes fittedwith air filter and mounting, an integrated cooling system with airand coolant lines, and full wire harnessing with an engine-mountedECM

Get a Quote

    Fabick Cat needs this information to contact you about our products and services. You may unsubscribe from communications at any time. For more information, please review our Privacy Policy.

    • Emission Standards
      Emissions
      Brazil MAR-1, UN R96 Stage IIIA
    • General
      Aspiration
      Turbocharged Aftercooled (TA)
      Bore
      4.5 in
      Compression Ratio
      16.5:1
      Displacement
      567.5 in³
      Engine Configuration
      Inline 6, 4-Stroke-Cycle-Diesel
      Rotation from Flywheel End
      Counterclockwise
      Stroke
      5.9 in
    • Power Rating
      Maximum Power
      416 HP
      Minimum Power
      308 HP
      Rated Speed
      1800-2200 rpm
    • Power Unit Dimensions
      Height
      63 in
      Length
      83 in
      Weight
      3265 lb
      Width
      43 in
    Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
    Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
    Cooling System
    • Vertical or RH thermostat outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
    Flywheels and Flywheel Housing
    • Dual rear PTO configuration
    • Available SAE No. 1 power take off with optional SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments.
    Fuel System
    • Electronic high pressure common rail
    • Primary fuel filter
    • Secondary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
    Lube System
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    Power Take Off (PTO)
    • SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
    General
    • Vibration damper
    • Lifting eyes