-
Aftertreatment Dimensions
Height
25.7 inLength
45.4 inWeight
600 lbWidth
43.8 in -
Aftertreatment Dimensions*
Diameter
14 in -
Emission Standards
Emissions
U.S. EPA Tier 4 Final -
Engine Dimensions - Approximate
Height
49.1 inLength
56.6 inWeight - Net Dry - Basic Operating Engine Without Optional Attachments
3673 lbWidth
38.1 in -
General
Aftertreatment
DOC+DPF+SCRAspiration
Turbocharged-Aftercooled (TA)Bore
5.4 inCombustion System
Direct InjectionCompression Ratio
17.0:1Displacement
927.6 in³Engine Configuration
In-Line 6Rotation from Flywheel End
CounterclockwiseStroke
6.7 in -
PETU Dimensions - Tier 4 Final Only
Height
21.7 inLength
33.6 inVolume Capacity
51.1 qt (US)Weight
42.8 lbWidth
11.3 in -
Power Rating
Maximum Power
580 hpMaximum Torque
1958 lb-ft @ 1400 rpmMinimum Power
475 hpRated Speed
1800-2100 rpm
Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Remote fan control
Cooling System
- Thermostats and housing, vertical outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
Flywheels and Flywheel Housing
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
- Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
Fuel System
- MEUI injection
- Primary fuel filter
- Secondary fuel filters
- Fuel transfer pump
- Electronic fuel priming
Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
Power Take Off (PTO)
- SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
General
- Paint: Caterpillar yellow, with optional colors available at request
U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
- Cat Regeneration System
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- NOx Reduction System (NRS)
- Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
- Available in 12 volt or 24 volt systems
U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment
- Cat Regeneration System
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- Aftertreatment Electronic Control Unit (ECU)
- NOx Reduction System (NRS)
- Pump Electronic Control Unit (PETU)
- Selective Catalytic Reduction (SCR)
- Available in 12V or 24V systems