New CAT Equipment

Cat 907 Compact Wheel Loader

Configured for Success

Cat^® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 907 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.

Get a Quote

Benefits

60% Greater Wiper Coverage

all new cab with seat mounted controls and integrated display screen

40 kph (25 mph)

with "shift on the go" transmission

Customized

for application specific configurations including factory and aftermarket options

Watch

Full Specifications
Standard Equipment
Optional Equipment
Resources

Axles

Front

Fixed (standard), Locking Differential (optional)

Note

Oscillation of ±11 degrees via hitch between front and rear frames.

Rear

Fixed (standard), Locking Differential (optional)
Buckets

Bucket Capacities

0.75-1.55 m³ (1.0-2.0 yd³)

Bucket Capacities - General Purpose

0.80-1.35 m³ (1.0-1.7 yd³)

Bucket Capacities - Light Material

1.25-1.55 m³ (1.6-2.0 yd³)

Multi-Purpose

0.75-1.1 m³ (1.0-1.4 yd³)

Note

Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.

Note (1)

Bucket capacities stated include BOCE, in line with ISO 7546.
Cab

FOPS

ISO 3449:2005 Level II

Note (1)

Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.

Note (2)

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 71 dB(A).

Note (3)

*Measurements were conducted with the cab doors and windows closed.

Note (4)

The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). 99 dB(A) Low Sound – Option available.

ROPS

ISO 3471:2008
Dimensions - With HPL-V Coupler - Approximate#

80% of Tip: Firm and Level EN474-3 ††

5255 lb

Articulation Angle - Degrees

39°

Carry Height: Bucket Pin

1.08 ft

Clearance: Bucket at 45° *

8.25 ft

Clearance: Level Bucket**

9.92 ft

Clearance: Load over Height**

9.5 ft

Departure Angle - Degrees

30°

Dig Depth**

0.33 in

Dump Angle at Full Lift

45°

Height: Bucket Pin**

10.67 ft

Height: Ground Axle Center**

1.58 ft

Height: Ground Clearance**

1 ft

Height: Ground to Beacon**

9.08 ft

Height: Ground to Cab**

8.5 ft

Height: Overall**

13.5 ft

Length: Front Axle to Front of Coupler

3.5 ft

Length: Hitch to Front Axle

3.58 ft

Length: Overall*

17.58 ft

Length: Rear Axle to Bumper

4.58 ft

Length: Wheel Base

7.08 ft

Note (1)

*Vary with bucket

Note (2)

**Vary with tire

Note (3)

^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.

Note (4)

^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).

Note (5)

†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6)

††Full compliance to EN474-3 and SAE J1197.

Note (7)

#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (8)

Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II fork carriage and tines, (tire supplier variability can impact dimensions by 2%).

Note (9)

Note: Goodyear POWERLOAD^® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.

Operating Weight: Bucket ^

12689 lb

Operating Weight: Carriage and Tines ^^

12220 lb

Rack Angle at Carry

51°

Rack Angle at Full Lift

56°

Reach: Bucket at 45° *

2.33 ft

Tipping Load - Full Turn - ISO 14397-1 †

8235 lb

Tipping Load - Full Turn †

6569 lb

Tipping Load - Straight - ISO 14397-1 †

9773 lb

Tipping Load - Straight †

7807 lb

Turning Radius: Inside of Tires

6.75 ft

Turning Radius: Outside of Tires

12.92 ft

Turning Radius: Over Bucket

14.75 ft

Width: Bucket

6.75 ft

Width: Over Tires

6.07 ft

Width: Tread Center

4.67 ft
Dimensions - With SSL Coupler - Approximate

80% of Tip: Firm and Level EN474-3 ††

5013 lb

Articulation Angle - Degrees

39°

Carry Height: Bucket Pin

1.17 ft

Clearance - Bucket at 45°

7.83 ft

Clearance - Level Bucket

9.92 ft

Clearance: Load over Height**

9.5 ft

Departure Angle - Degrees

30°

Dig Depth

3 in

Dump Angle at Full Lift

50°

Height - Bucket Pin

10.67 ft

Height - Ground Clearance

1 ft

Height - Ground to Cab

8.5 ft

Height: Ground Axle Center**

1.58 ft

Height: Ground to Beacon**

9.08 ft

Height: Overall**

13.83 ft

Length - Overall with Bucket

18.17 ft

Length - Wheel Base

7.08 ft

Length: Front Axle to Front of Coupler

4.33 ft

Length: Hitch to Front Axle

3.58 ft

Length: Rear Axle to Bumper

4.58 ft

Note (1)

*Vary with bucket

Note (2)

**Vary with tire

Note (3)

^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.

Note (4)

^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).

Note (5)

†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6)

††Full compliance to EN474-3 and SAE J1197.

Note (7)

#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (8)

Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II fork carriage and tines, (tire supplier variability can impact dimensions by 2%).

Note (9)

Note: Goodyear POWERLOAD^® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.

Operating Weight: Bucket ^

12897 lb

Operating Weight: Carriage and Tines ^^

12414 lb

Rack Angle at Carry

46°

Rack Angle at Full Lift

51°

Reach - Bucket at 45°

2.67 ft

Tipping Load - Full Turn †

6266 lb

Tipping Load - Straight †

7416 lb

Tipping Load – Full Turn – ISO 14397-1 †

7257 lb

Tipping Load – Straight – ISO 14397-1 †

8653 lb

Turning Radius - Inside Tire

6.75 ft

Turning Radius - Over Bucket

15 ft

Turning Radius: Outside of Tires

12.92 ft

Width - Bucket

6.75 ft

Width - Over Tires

6.08 ft

Width - Tread Center

4.67 ft
Engine

Bore

3.54 in

Displacement

171 in³

Engine Model

Cat C2.8*

Maximum Engine Speed

2550 rpm

Maximum Gross Power

74.7 hp

Maximum Gross Power - ISO 14396

74.3 hp

Maximum Gross Power - ISO 14396 (metric)

75.3 mhp

Maximum Gross Power - Rated Engine Speed

2400 r/min

Maximum Gross Power - SAE J1995

74.7 hp

Maximum Gross Torque - ISO 14396

221 lb/ft

Maximum Gross Torque - SAE J1995

222 lb/ft

Maximum Net Torque - ISO 9249

217 lb/ft

Maximum Net Torque - SAE J1349

218 lb/ft

Note

*Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.

Note (1)

Advertised power is tested per the specified standard in effect at the time of manufacture.

Note (2)

Net power advertised is the power available at the flywheel.

Note (3)

#Maximum gross and net torque measured at 1,600 rpm.

Rated Net Power - 2,400 rpm - ISO 9249 (metric)

73.1 mhp

Rated Net Power - ISO 9249

72.1 hp

Rated Net Power - Rated Engine Speed

2400 r/min

Rated Net Power - SAE J1349

72.7 hp

Stroke

4.33 in
Loader Hydraulic System

Hydraulic Cycle Time - Dump

1.6 s

Hydraulic Cycle Time - Float Down

2.8 s

Hydraulic Cycle Time - Lift

5 s

Hydraulic Cycle Time - Rackback

2.2 s

Main Relief - 1st Auxiliary (3rd slice)

3408 psi

Main Relief - 1st Auxiliary (3rd slice) - High Flow*

32 gpm

Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*

21 gpm

Main Relief - 2nd Auxiliary (4th slice)

3408 psi

Main Relief - 2nd Auxiliary (4th slice) - Flow

12 gpm

Note

* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.
Service Refill Capacities

Axles - Front Center Differential

2.3 Gal

Axles - Rear Center Differential

2.3 Gal

Cooling System

3.2 Gal

Engine Crankcase

2.3 Gal

Fuel Tank

24 Gal

Hydraulic System - Including Tank

17.8 Gal

Hydraulic Tank

11.8 Gal

Note

No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.

Transmission

0.6 Gal
Steering

Maximum Flow - Steering Pump

12.3 gpm

Maximum Working Pressure - Steering Pump

3336 psi

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.25 turns or 4.00 turns

Steering Articulation Angle - Each Direction

39 °

Steering Cycle Times – (full left to full right) – at High Idle

2.8 s
Sustainability

Recyclability

93%
Tires

Note

*This tire has been used for all dimension, stability and performance data.

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Note (2)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Tire Size - Optional

405/70 R18 Powerloads

Tire Size - Optional (1)

340/80 R18 XMCL/Bibload

Tire Size - Optional (2)

340/80 R18 TRI 2

Tire Size - Optional (3)

40X14-20 TL, SM/TR

Tire Size - Optional 4

340/80 R18 Duraforce

Tire Size - Standard

*405/70 R18 SPT9
Transmission

Forward and Reverse - Speed Range 1*

6 mile/h

Forward and Reverse - Speed Range 2** - High Speed

10.5 mile/h

Forward and Reverse - Speed Range 2** - Standard

12 mile/h

Forward and Reverse - Speed Range 3***

25 mile/h

Forward and Reverse - Speed Range Creep#

6 mile/h

Note

#Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).

Note (1)

*Creep function not available in this gear or above.

Note (2)

**Max speed dependent on model and configuration (standard vs. high speed transmission).

Note (3)

***Reverse is 30 km/h (19 mph).
Weights

Operating Weight

12765 lb

ELECTRICAL

Product Link^™
Service (Electronic Technician^™)
Lights, roading, front halogen
Lights, rear stop and turn, LED
Cab mounted fuse panel
Battery disconnect switch
Battery, heavy duty, 12V, 90Ah and 1,000 CCA
Alternator, 100 amp sealed

HYDRAULICS

Motor, single drive with dedicated implement and steering pumps
Multi-function lift and tilt with loader arm float
Joystick, single lever, single auxiliary roller
Implement valve, pressure compensated
Hystat displacement pump, infinitely variable
Caterpillar HYDO^™ Advanced 10 hydraulic oil
Coupler/pin on attachment ready
Demand cooling fan, hydraulically driven
Dead engine lower, lift valve, manual
Electro-hydraulic, fully proportional controls
Hydraulic pilot shut off switch, in cab

OPERATOR ENVIRONMENT

Cab
–Doors (2), fixed glass
–Wipers, front and rear, full front coverage
–Windshield, front single piece
–Window, rear heated
–Radio ready, speakers and wiring
–Air vents, (4) screen, (7) directional
–Heating, mechanical control unit
–Sun visor, solid, front full width
–Interior light (incandescent)
Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
Joystick, seat mounted, standard multifunction
–FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
–Arm rest, padded right, multiple position vertical height
Display, analog and digital
–Gauges (2), hydraulic oil, engine coolant
–Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages)
ROPS/FOPS certified canopy/cab
–12V power outlets, interior/exterior
–Pedals, raised, foot, brake/inching, accelerator
–Lever, parking brake
–Cup holders (2)
–CB radio clip, phone holder
–Door release, internal (left and right)
–Hook, large, coat and hard hat
–Floormat, heavy duty, easy clean
–Mirrors, (2) external breakaway, (1) internal
–Operator station on isolation mounts
–Steering wheel, spinner knob, horn in center
–Seat belt, orange, retractable, 51 mm (2 in)
–Storage, personal (trays [3], seat pocket)
–Steering column, tilt adjusted
–Column mounted multi function control: lights, roading, wipers, self canceling turn signals
–Quick coupler switch, in cab

OTHER

Scheduled Oil Sampling (S·O·S℠) ports, engine oil and hydraulic oil
Recovery hitch with pin
Paint, Electro-Coat primer, gloss topcoat
Machine lifting/tie down points
Lockable, fuel cap, HVAC filters, nose cone
Lockable main and side engine enclosures
Loader arm safety brace
Ground level easy access daily service points
Fenders, front and rear

POWER TRAIN

Fuel pump, priming (manual)/water separator/drain
Engine oil, ECO drain tap and hose
Engine, auto idle shutdown, hibernation mode
Drive shaft, sealed for life, universal joints
Coolant, extended life, –36° C (–33° F)
Closed circuit breather
Axles, heavy duty, frame mounted with outboard planetary reduction
Air cleaner, two stage filter, with in cab audio/visual indicator on display
Cat C2.8 engine
–Diesel particulate filter (Fit for Life)
–Fuel, diesel, ultra low or low Sulphur
–Hydrostatic transmission, two speed, with inching function, “shift on the go”
–Power train mode, hystat
U.S. EPA Tier 4 Final and EU Stage V emissions compliant

ELECTRICAL

Work tool wiring harness, (3) in cab switches
Push to start
Lighting packages, multiple; front, rear, engine bay (LED or HAL)

HYDRAULICS

Quick disconnect auxiliary hydraulics
Reversing fan
Ride Control or load check valves
Connect under pressure and case drain
Caterpillar Bio HYDO Advanced hydraulic oil
Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve

OPERATOR STATION

USB ports (2), interior
Sun visor, rear perforated
Storage, lockable box or lockable cooled box
Soft touch keypad options, 8 or 16 button
Secondary display, front or rear view camera
Seat packages; deluxe or premium
Seat belt options, multiple
Radio, FM or digital audio broadcast
Phone holder, spring loaded
Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror
Joystick, FNR, twin auxiliary roller, differential lock, horn
Interior light, door activated
Doors, sliding windows (left and right)
Air Conditioning, automatic temperature control (ATC)

OTHER

Rotary sensors (snubbing, kickouts, parallel)
Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)

POWER TRAIN

Power train mode, utility (includes keypad)
40 km/h (25 mph) hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes
Fuel pump, priming, manual
Creep and throttle lock function
Cold start – jacket water heater, bypass valve
Antifreeze, extended life coolant, –50° C (–58° F)

Recommended Searches:

Commitments

Cat 907 Compact Wheel Loader

Configured for Success

Get a Quote

Benefits

60% Greater Wiper Coverage

40 kph (25 mph)

Customized

Learn more about the Cat 907 Compact Wheel Loader

Front

Note

Rear

Bucket Capacities

Bucket Capacities - General Purpose

Bucket Capacities - Light Material

Multi-Purpose

Note

Note (1)

FOPS

Note (1)

Note (2)

Note (3)

Note (4)

ROPS

80% of Tip: Firm and Level EN474-3 ††

Articulation Angle - Degrees

Carry Height: Bucket Pin

Clearance: Bucket at 45° *

Clearance: Level Bucket**

Clearance: Load over Height**

Departure Angle - Degrees

Dig Depth**

Dump Angle at Full Lift

Height: Bucket Pin**

Height: Ground Axle Center**

Height: Ground Clearance**

Height: Ground to Beacon**

Height: Ground to Cab**

Height: Overall**

Length: Front Axle to Front of Coupler

Length: Hitch to Front Axle

Length: Overall*

Length: Rear Axle to Bumper

Length: Wheel Base

Note (1)

Note (2)

Note (3)

Note (4)

Note (5)

Note (6)

Note (7)

Note (8)

Note (9)

Operating Weight: Bucket ^

Operating Weight: Carriage and Tines ^^

Rack Angle at Carry

Rack Angle at Full Lift

Reach: Bucket at 45° *

Tipping Load - Full Turn - ISO 14397-1 †

Tipping Load - Full Turn †

Tipping Load - Straight - ISO 14397-1 †

Tipping Load - Straight †

Turning Radius: Inside of Tires

Turning Radius: Outside of Tires

Turning Radius: Over Bucket

Width: Bucket

Width: Over Tires

Width: Tread Center

80% of Tip: Firm and Level EN474-3 ††

Articulation Angle - Degrees

Carry Height: Bucket Pin

Clearance - Bucket at 45°

Clearance - Level Bucket

Clearance: Load over Height**

Departure Angle - Degrees

Dig Depth

Dump Angle at Full Lift

Height - Bucket Pin

Height - Ground Clearance