New CAT Equipment

Cat?� C13B Diesel Engine

The Cat?� C13B engine supplies remarkable power and torque in a smaller, lighter engine package. With a aftertreatment that is 65% smaller and 54% lighter than its current equivalent and over 34 kW/L of power density, the C13B is designed to allow OEMs to downsize their engine platforms, lower installation costs and maximize uptime by providing long life in the toughest applications.

Get a Quote

Benefits

Peak Power Increased Up To 20% Compared to Previous Models

Over 120 MILLION hours of customer application experience

Engine package is 32% lighter, compared to previous models

Learn more about the Cat?� C13B Diesel Engine

Watch

  • Aftertreatment Dimensions
    Height
    18.1 in
    Length
    35.3 in
    Weight
    220 lb
    Width
    31.8 in
  • Emission Standards
    Emissions
    EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
  • Engine Dimensions - Approximate
    Height
    45 in
    Length
    50 in
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    2480 lb
    Width
    39 in
  • General
    Aftertreatment
    DOC+DPF+SCR
    Aspiration
    Turbocharged-Aftercooled (TA)
    Bore
    5.1 in
    Combustion System
    Direct Injection
    Compression Ratio
    15.8:1
    Displacement
    762.8 in³
    Engine Configuration
    In-Line 6
    Rotation from Flywheel End
    Counterclockwise
    Stroke
    6.2 in
  • Power Rating
    Maximum Power
    577 hp
    Maximum Torque
    1943 lb-ft @ 1400 rpm
    Minimum Power
    456 hp
    Rated Speed
    1800-2100 rpm
Air Inlet System
  • Turbocharged
  • Air-to-Air Aftercooled
  • Front or rear exhaust configurations available
Control System
  • Electronic control system
  • Over-foam wiring harness
  • Automatic altitude compensation
  • Power compensated for fuel temperature
  • Configurable software features
  • Engine monitoring system SAE J1939 broadcast and control
  • Integrated Electronic Control Unit (ECU)
  • Remote fan control
Cooling System
  • Vertical or RH thermostat outlet
  • Centrifugal water pump
  • Guidance on cooling system design available through your dealer to ensure equipment reliability
Flywheels and Flywheel Housing
  • Available SAE No. 1 power take-off with optional SAE B or SAE C power take-off drives. Engine power can also be taken from the front of the engine with optional attachments.
Fuel System
  • Mechanical Electronic Unit Injector fuel system (MEUI-C)
  • Primary fuel filter
  • Secondary and tertiary fuel filters
  • Fuel transfer pump
  • Electronic fuel priming
Lube System
  • Open crankcase ventilation system
  • Oil cooler
  • Oil filler
  • Lube oil filter
  • Oil dipstick
  • Gear driven oil pump
  • Choice of front, rear or center sumps
  • Open crankcase ventilation system with fumes disposal (OCV filter system required for EU Stage V certification engines)
Power Take Off (PTO)
  • SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
General
  • Caterpillar yellow paint, with optional colors available at request
  • Vibration damper
  • Lifiting eyes

Download Resources

Site Map Legal Terms Privacy Policy Your Privacy Choices California Collection Notice Cookie Policy
Copyright © 2026 Fabick Cat | All Rights Reserved.

Fabick Cat & Fabick Cat Rentals are not affiliated with Fabick, Inc. Click here for more information.