-
Dimensions & Weights
Height
35.1 inLength
43.1 inMaximum Engine Dry Weight
1676 lbMaximum Width
33.5 inMinimum Engine Dry Weight
1609 lbMinimum Width
31.4 in -
Engine Specifications
Aspiration
Turbocharged-aftercooled aspirationBore
4.13 inConfiguration
In-line 6, 4-stroke-cycle dieselCooling
Heat exchanger or keel cooledDisplacement
428 in³Emissions
U.S. EPA Tier 3 / IMO II emissions certified (commercial), RCD 2016 compliant, EU Stage IIIA compliant, CCNR Stage II through reciprocity with EU Stage IIIAFlywheel Housing
SAE No. 03 with SAE 11.5 in flywheelGovernor
Electronic (A5E2 V2 ECM)Oil Change Interval
500 hrsRated Engine Speed
2300 rpmRefill Capacity
Lube Oil System w/Oil filter change: 20 L (5.3 gal)Rotation
Counterclockwise from flywheel endStroke
5.31 in -
Power Rating
Power Range
208 bkW (280 bhp) @ 2300 rpm
COOLING SYSTEM
- Gear driven jacket water pump
- Corrosion resistant sea water aftercooler
- Fuel cooler
EXHAUST SYSTEM
- Watercooled turbocharger and exhaust manifold
FUEL SYSTEM
- Common rail fuel system
- Electric fuel priming pump
GENERAL
- Vibration damper and guard
- Self-tensioning multi-vee belt drive
LUBE SYSTEM
- Closed crankcase ventilation system
- Integral engine oil cooler
MOUNTING SYSTEM
- Front and rear engine mounting brackets
STARTING SYSTEM
- Starter motors - 12V or 24V
AIR INLET SYSTEM
- Various 6" water cooled exhaust elbow configurations
COOLING SYSTEM
- Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
- Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
- Jacket water heater
- Cabin heater (calorifier) connections
FUEL SYSTEM
- SOLAS double wall high pressure fuel lines kit
LUBE SYSTEM
- Left-hand and right-hand oil dipsticks
- Transmission gear oil cooler (engine mounted)
PROTECTION SYSTEM
- Additional engine and transmission sensor packages for on or off vessel monitoring
STARTING SYSTEM
- Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
- Glow plugs