New CAT Equipment

C280-6 Generator Set (Medium Speed)

C280-6

Producing reliable power from 1650 to 1820 ekW at 60 Hz and 2200 to 2425 kVA at 50 Hz, our C280-6 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We've designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set meets IMO/EPA Tier 2 emissions.

Get a Quote

    Fabick Cat needs this information to contact you about our products and services. You may unsubscribe from communications at any time. For more information, please review our Privacy Policy.

    Benefits

    Over 200,000,000 Operating hours

    at Global locations

    Up to 10% Better Fuel Economy

    Demonstrated savings

    Over 20% Reduction in Service Time

    Two inspection ports per cylinder, segmented camshafts and individual heads ease service
    • Engine Specifications
      Aspiration
      TA
      Bore
      11 in
      Compression Ratio
      13:01
      Displacement
      111 in³
      Engine Model
      C280-6, I-6,4-Stroke Water-Cooled Diesel
      Fuel System
      Direct unit injection
      Governor Type
      Generator Set Monitoring System (GMS)
      Stroke
      11.8 in
    • Generator Set Dimensions
      Dry Weight - Genset (maximum)
      74970 lb
      Height - Maximum
      156.6 in
      Length - Maximum
      404 in
      Width - Maximum
      99.62 in
    • Generator Set Specifications
      Duty Cycle
      Prime, Continuous
      Emissions/Fuel Strategy
      IMO Tier 2
      Frequency
      50 / 60 Hz
      Maximum Rating
      1820 ekW (60Hz), 2425 kVA (50Hz)
      Minimum Rating
      1650 ekW (60Hz), 2200 kVA (50Hz)
      Speed
      900 / 1000 rpm
    Air Inlet System
    • Air inlet shutoff
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
    • Breather, crankcase, top-mounted
    Cooling System
    • Water temperature regulator
    • Engine coolant water drains
    • Jacket water thermostats
    Exhaust System
    • Includes adapter, flexible exhaust fitting
    • Dry, gas tight, exhaust manifold
    • 457 mm (18 in) Cat bolt pattern
    Fuel System
    • Simplex or duplex
    Generator System
    • Custom generator per generator data sheet completed by dealer
    Governor System
    • UG Actuator
    Lube System
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
    • Centrifugal oil filters with single shutoff
    • Service side engine mounted on cylinder block inspection covers
    • Crankcase explosion relief valves
    • Oil filler and dipstick
    • Oil pressure regulating valve
    Mounting System
    • Damper, torsional vibration
    • Engine and generator mounting
    Starting / Charging System
    • Vane type air starter
    • Line group for single point custom connection
    • Air silencer
    • One motor, engine mounted at rear, on left side
    General:
    • Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
    • Paint, Caterpillar yellow
    Air Inlet System
    • Air inlet adapter
    • Soot filter
    • Heavy duty air cleaner
    • Boost control valve
    • Air cleaner louver assembly
    • Air cleaner
    • Vertical support bracket
    Cooling System
    • Auxiliary water pump
    • Cooling system aids
    • Heating aids
    • Expansion tank
    Exhaust System
    • Weld flange and related hardware
    • Flexible exhaust fittings
    Fuel System
    • Fuel system connections
    • Fuel priming pump
    • Duplex primary fuel strainer
    Generator System
    • Class F insulation
    • 3 Phase, six Leads, WYE
    • Busbar connections
    • Winding temperature detectors
    • Anti-condensation space heaters
    Governor System
    • 723 Plus
    • Digital programmers
    • Electronic/actuators
    • Battery backup/power supply
    • 2301 A load share
    • EGB actuator
    Lube System
    • Oil pan drain valve
    • Lube ANSI adapter (Emergency connection)
    Mounting System
    • Isolator
    • Spring type vibration isolators
    • Non-vertically restrained
    • Vertically restrained
    Starting / Charging System
    • Pressure reducing valve
    • Compressed air flex hose
    General:
    • Custom paint colors