New CAT Equipment

C175-16 Generator Set

2500 - 3365 ekW Diesel Generator Set

Producing reliable power from 2500 - 3365 ekW at 60 Hz, our C175-16 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We've designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set is Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards) certified.

Get a Quote

    Fabick Cat needs this information to contact you about our products and services. You may unsubscribe from communications at any time. For more information, please review our Privacy Policy.

    Benefits

    Over 20,000,000 Operating hours

    at Global locations

    Over 3000 units

    In the field

    Highest Rated Tier 4 Product

    Available on the market

    Learn more about the C175-16 Generator Set

    Watch

    • Engine Specifications
      Aspiration
      Turbo Aftercooled
      Bore
      6.89 in
      Compression Ratio
      16.7:1
      Displacement
      6456.31 in³
      Engine Model
      C175-16 SCAC, V-16, 4-Stroke Water-Cooled Diesel
      Fuel System
      Common Rail
      Governor Type
      ADEM� A4
      Stroke
      8.66 in
    • Generator Set Dimensions
      Dry Weight - Genset (maximum)
      50500 lb
      Dry Weight - Genset (minimum)
      42750 lb
      Height - Maximum
      134.3 in
      Height - Minimum
      87 in
      Length - Maximum
      312.9 in
      Length - Minimum
      241.6 in
      Width - Maximum
      113.7 in
      Width - Minimum
      83.1 in
    • Generator Set Specifications
      Duty Cycle
      Standby, Mission Critical, Prime, Continuous
      Emissions/Fuel Strategy
      Low Fuel, Tier 2
      Frequency
      60 Hz
      Maximum Rating
      3365 ekW
      Minimum Rating
      2500 ekW
      Prime Power Rating
      3115(no fan)/3000/2825(no fan)/2725 ekW
      Speed
      1800 RPM
      Standby Rating
      3365(no fan)/3250/3100(no fan)/3000 ekW
      Voltage
      480 to 13800 Volts
    Air Inlet System
    • 4 x Single element canister with service indicator(s).
    Control Panel
    • 2 Programmable relay outputs (Form C)
    • Low coolant level
    • Over/under voltage
    • Coolant temperature
    • Serial annunciator module data link
    • Alarm acknowledge
    • Text alarm/event descriptions
    • Volts (L-L & L-N)
    • Reverse power
    • Over/under frequency
    • Environmental sealed front face
    • Programmable protective relaying functions
    • Speed adjust
    • Generator phase sequence
    • Low coolant temperature
    • Generator mounted - rear facing
    • Overspeed
    • Controls
    • Frequency (Hz)
    • Engine cycle crank
    • Engine cool-down timer
    • Warning/shutdown Indicators:
    • Lamp test
    • 2 Programmable digital outputs
    • 6 Programmable digital inputs
    • High coolant temperature
    • Customer data link (Modbus RTU)
    • Auto/start/stop control
    • Emergency stop pushbutton
    • RPM
    • Digital Indicators
    • Communications
    • Accessory module data link
    • Oil pressure (psi, kPa or bar)
    • Low oil pressure
    • Overcurrent
    • Emergency stop
    • 24 Volt DC operation
    • 4 Programmable relay outputs (Form A)
    • Failure to start (overcrank)
    • True RMS AC metering, 3-phase, +/-2% accuracy
    • Power factor (per phase & average)
    • Operating hours
    • DC volts
    • Amps (per phase & average)
    • Cat ECS 100
    • Reverse reactive power
    Exhaust System
    • Bolted flange, with bellow for each turbo
    • Exhaust flange outlet
    Fuel System
    • Engine mounted filters #REF!
    • Filters x 3
    • 10 Micron spin on yype
    • Secondary/tertiary fuel filters
    • 4 Micron spin on type
    • Primary fuel filter water/fuel water separator
    Generators and Attachments
    • Right side extension box, bottom cable entry
    • IEC platinum stator RTDs
    • Reactive droop capability
    • 3 Phase voltage sensing
    • (MV) Busbar connections, right side extension box, bottom cable entry
    • Class F temperature rise at 40C ambient
    • Anti-condensation space heater
    • NEMA Class H insulation
    • 6 Leads
    • Class H temperature rise at 40C ambient
    • Voltage regulator
    • Exciter diode monitor
    • Form wound
    • RFI suppression
    • (LV) Busbar connections, top/center mounted, top cable entry
    • 3 Phase brushless
    • 60 Hz models: NEMA standard hole pattern
    • Permanent magnet excitation (PMG)
    • Min / max exciter limiter
    • Salient pole
    Governing System
    • Redundant shutdown (Overspeed protection through a duplicate speed sensing system)
    • ADEM A4
    Lube System
    • Oil filter, filler and dipstick
    • Integral lube Oil cooler
    • Oil drain lines and valve
    • Fumes disposal
    • Lubricating oil
    • Prelube - required with prime, continuous, and standby
    • Gear type lube oil pump
    Mounting Systems
    • Rails - Engine/generator
    • Rubber anti-vibration mounts - shipped loose
    • Dual 24 volt electric starting motors
    • Battery disconnect switch
    • Batteries and battery rack w/cables
    Power Termination
    • Busbar
    Service Instructions
    • Two PM inspections
    General
    • Paint - Caterpillar yellow with high gloss black rails & radiator
    • SAE standard rotation
    • LH Service
    • Flywheel and flywheel housing-SAE No. 00
    Air Inlet System
    • Air inlet adapters
    • Dual element air cleaner
    • Single element air cleaner
    • Air inlet protection
    Control Panel
    • Package mounted radiator
    • Automatically selected ground
    • Customer AC-DC connection mounting location - LV/MV
    • Load share governor
    • EMCP 4.4
    • E-Stop
    • Frame boxes
    • Annunciator modules
    • Load share module / auxiliary plate and auxiliary box (LV)
    • Fuel cooler
    • Controller mounting location - LV/MV
    • Modbus monitoring of packages
    • Customer interface options
    • EMCP 4.4 optional harness
    • Controller voltage and current sensing groups
    • Remote radiators
    • Generator harness
    • Interconnect harness
    • Speed adjust
    • Controller and MV and HV power connection locations
    • Raise lower switch
    Crankcase Systems
    • Explosive relief valves
    • Crankcase ventilation system
    Exhaust System
    • Mufflers
    • Exhaust support group
    • Weld flanges
    • Exhaust collectors/manifold
    • Front housing - Prime or continuous
    • Front housing - Standby or mission critical
    • Aftercooler drain
    Fuel System
    • Primary fuel filter
    Generators and Attachments
    • Low voltage - 1800 and 3000 Frames - 60 Hz, 3 phase, 1800 rpm, FW, PM, No of leads=6, Pitch 0.6667
    • Medium voltage - 1800 and 3000 Frames - 60 Hz, 3 phase, 1800 rpm, FW, PM, No of leads=6, Pitch 0.6667
    • Conversion GP - Top cable entry
    • Low voltage - 1800 and 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667
    • Differential current transformers
    • Space heater kit
    • Medium voltage - 1800 and 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667
    • Thermostat for space heater
    • Generator air intake
    Instrumentation
    • Pyrometer and thermocouples
    Lube System
    • Drain group oil pans
    • Oil filters
    • Lube oil heater
    • Electric prelube pumps
    • Lubricating oil
    Mounting Systems
    • IBC vibration isolators - Shipped loose
    • Spring type linear vibration isolators
    • Rubber anti-vibration mounts
    Power Connections
    • Low voltage connection cable
    • Center post busbarss (LV)
    • 1800 Frame generator side / rear mounted busbars (MV)
    • Enclosures - Control packaging (LV)
    • Paralleling circuit breakers
    • 1800 Frame generators Circuit breaker
    • Neutral ground (LV)
    • Neutral ground (MV)
    • Cable entry options (LV)
    • Cable entry options (MV)
    • Masterpack breakers
    • Power connection covers (LV)
    • Harnesses (Breaker)
    • Masterpack breaker connections
    • Side/rear mounted busbars (LV)
    Special Tests / Reports
    • IBC seismic Certification
    • Special test charge - Engine only
    • PGS Test report @ 0.8 power factor
    • Genset fuel consumption test
    • Standard genset TVA (Torsional Vibration Analysis) report
    • PGS Test report @ 1.0 power factor
    • OSCOSH1 seismic Certification
    • Custom generator TVA report
    • Generator test report
    • Standard engine test charge
    Starting / Charging System
    • Heavy duty battery sets with rack
    • Charging alternators - Dry
    • Air pressure regulator
    • Starter location covers
    • 24 Volt power distribution box
    • 24 Volt electric starting motor
    • 35 Amp Battery chargers
    • 24 Volt battery set - Dry
    • 20 Amp Battery chargers
    • Jacket water heaters
    • 50 Amp Battery chargers
    • Air starting motor
    • Jacket water heater wiring groups
    General
    • Special paint colors
    • Control GP - air powered bar group
    • Barring group manual
    • Service tools - Engine barring group
    • Engine barring air powered

    Download Resources

    Site Map Legal Terms Privacy Policy Your Privacy Choices California Collection Notice Cookie Policy
    Copyright © 2024 Fabick Cat | All Rights Reserved.

    Fabick Cat & Fabick Rents – The Cat Rental Store are not affiliated with Fabick, Inc. Click here for more information.