New CAT Equipment

C15 Generator Set

320 - 500 ekW Diesel Generator Set

The C15 diesel generator sets have been developed for your mission critical, standby and prime applications. Producing reliable power from 320 to 500 ekW at 60 Hz, meeting ISO 8528-5 transient response requirements and built to accept 100 % rated load in one step. The engines are certified Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 or Tier 3 Nonroad Equivalent Emission Standards), EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards.

Get a Quote

    Fabick Cat needs this information to contact you about our products and services. You may unsubscribe from communications at any time. For more information, please review our Privacy Policy.

    Benefits

    Integrated Cat® Product Link Control System

    • Track Genset Health and Operation Parameters
    • Genset Utilization and Performance Tracking

    Remote Connectivity Optimised Fuel Consumption

    Over 1,600 Dealer Locations Worldwide

    Cat dealers in over 190 countries provide parts, service & warranty support to ensure maximum productivity
    • Engine Specifications
      Aspiration
      Air to Air Aftercooled
      Bore
      5.4 in
      Compression Ratio
      16.1:1
      Displacement
      927.56 in³
      Engine Model
      C15 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
      Fuel System
      MEUI
      Governor Type
      AdemA4
      Stroke
      6.75 in
    • Generator Set Dimensions
      Height - Maximum
      126.3 in
      Length - Maximum
      168.2 in
      Width - Maximum
      81 in
    • Generator Set Specifications
      Duty Cycle
      Standby, Prime
      Emissions/Fuel Strategy
      Low Fuel, Tier 2, Tier 3, EU Stage IIIA
      Frequency
      60 Hz
      Maximum Rating
      500 ekW
      Minimum Rating
      320 ekW
      Speed
      1800 RPM
      Voltage
      208 to 600 Volts
    Air Inlet
    • Air cleaner
    Air System
    • Turbocharger
    • Air cleaner - Non canister disposable paper filter
    • Aftercooler core
    Control Panel
    • GCCP 1.3
    • GCCP 1.3 Genset Controller
    Cooling
    • Package mounted radiator
    Cooling System
    • Caterpillar extended life coolant
    • Fan drive, battery charging alternator drive
    • Radiator and cooling fan with guard
    • Coolant drain line with valve
    Exhaust
    • Base, formed steel with single wall integral 8-hour fuel tank
    • Standard open set fuel tank/base supplied
    • Exhaust flange outlet
    Fuel
    • Secondary fuel filters
    • Primary fuel filter with integral water separator
    • Fuel priming pump
    Fuel System
    • Primary fuel filter w/integral water separator and secondary filter
    • Fuel priming pump
    • Engine fuel transfer pump
    • Flexible fuel lines
    • Fuel cooler
    Generator
    • Matched to the performance and output characteristics of Cat engines
    • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
    • IP23 Protection
    Power Termination
    • Busbar
    Generator and Attachments
    • Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
    • Integrated voltage regulator (IVR)
    • Segregated low voltage (AC/DC) wiring panel
    • Optional LC Frame generator - IP23 Protection
    • Power center, IP22
    • A Frame generator - IP21 Protection
    Mounting
    • Rubber vibration isolators
    Governing System
    • Cat electronic governor (ADEM A4).
    Lube System
    • Oil cooler
    • Oil drain valves
    Mounting System
    • Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
    Starting/Charging
    • 24 Volt battery with rack and cables
    • 24 volt starting motor
    • Batteries
    General
    • Engine and alternator pre paint, Caterpillar yellow
    • Paint - Caterpillar yellow except rails and radiators gloss black
    Air Inlet System
    • Single element air cleaner
    • Dual element air cleaner
    Exhaust
    • Industrial, residential, critical mufflers
    Certifications
    • EU Certificate of Conformance (CE)
    • Global certification for CIS
    Circuit breakers
    • Shunt trip for IEC circuit breaker
    • Padlockable circuit breaker device
    • 4 Pole (IEC-100% rated) Circuit breakers - Motorised
    • Auxiliary contacts, circuit breaker
    • 3 Pole (IEC-100% rated) Circuit breakers - Motorised
    • 3 Pole (IEC-100% rated) Circuit breakers - Package mounted
    • 4 Pole (IEC-100% rated) Circuit breakers - Package mounted
    • Power terminal strip
    Generator
    • Oversize and premium generators
    • Anti-condensation heater
    • Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
    Power Termination
    • Circuit breakers, UL listed
    • Circuit breakers, IEC compliant
    Control Panels
    • GCCP 1.4
    • Volt free contacts
    • Local annunciator
    • Remote annunciator module
    • Local alarm horn
    • Oil temperature displays
    • Protective devices: Earth fault relay ; Earth leakage Ground fault relay ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor
    Starting/Charging
    • Jacket water heater
    • Charging alternator
    • Heavy duty starting system
    • Battery chargers
    • Oversize batteries
    Cooling System
    • Stone guards
    • Radiator duct flange
    • Low coolant temperature alarm
    Enclosures
    • Sound attenuated enclosures
    • High ambient sound attenuated enclosures
    General
    • Sound attenuated, weather protective or high ambient weather protective enclosure
    • CSA Certification
    • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
    • EEC Declaration of Conformity
    • Integral & sub-base UL listed dual wall fuel tanks
    • Automatic transfer switches (ATS)
    • Single or dual wall sub-base fuel tanks
    • The following options are based on regional and product configuration:
    • EU Certificate of Conformance (CE)
    • Single or dual wall integral fuel tanks
    • Narrow, wide or skid base
    • UL 2200 package
    Exhaust System
    • Engine mounted muffler
    • End in/end out mufflers - 10, 25 and 35 dBA attenuation
    • 6 and 8 inch elbow kit
    • Manifold and turbocharger guards
    • Flexible exhaust fittings
    • 6 and 8 inch flange GP
    Fuel System
    • Manual fuel transfer pump
    • Dual wall fuel tank base
    • Fuel transfer system controls
    Generator and Attachments
    • Space heaters
    • Permanent magnet excitation (PMG) generator
    • Ingress protection
    • LC frame generator
    • Oversize A Frame generator
    • LC frame CIP generator
    • CIP A Frame generator
    • Oversize LC frame generator
    Lube System
    • Manual sump pump
    Mounting System
    • Narrow skid base - replaces standard fuel tank base
    Special Test / Reports
    • PGS Test report @ 1.0 power factor
    • PGS Test report @ 0.8 power factor
    Starting / Charging System
    • 5 Amp single Battery charger
    • Battery disconnect switch
    • Jacket water heater