-
Emission Standards
Emissions
China Nonroad Stage IV -
Engine Dimensions - Approximate
Height
23.1 inLength
19.6 inWeight - Net Dry - Basic Operating Engine Without Optional Attachments
211 lbWidth
20.1 in -
General
Aspiration
Naturally Aspirated (NA)/Turbocharged (T)Bore
3 inCombustion System
indirect injectionCompression Ratio
22.1:1Displacement
67.1 in³Engine Configuration
In-line-3Rotation from Flywheel End
counterclockwiseStroke
3.2 inTotal Lubricating Oil Capacity
1.16 gal (US) -
Power Rating
Maximum Power
24.6 hpMaximum Torque
63.4 lb-ft @ 1600 rpmMinimum Power
24.6 hpRated Speed
2400 rpm
Air inlet system
- Inlet manifold with choice of inlets
Air Inlet System
- Inlet manifold with choice of inlets.
Control System
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
- U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
Fuel System
- Fuel injection pump
- Spin-on fuel filter
Lube System
- Low profile oil pan
- Spin-on lube oil filter
- Lube oil pressure switch
Power Take Off (PTO)
- Provision for Power Take Off (PTO)
General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request