New CAT Equipment

AD30 Underground Mining Truck

The AD30 underground mining truck is designed for high production, low cost-per-ton hauling in smaller underground mining applications. Rugged construction and easy maintenance guarantee long life with low operating costs.
Engineered for performance, designed for comfort, built to last.

Get a Quote

    Product Specs

    Engine

    Engine Model Cat® C15
    Gross Power - SAE J1995 409 HP
    Gross Power - VR Engine - SAE J1995 409 HP
    Gross Power - Tier 3 Engine - SAE J1995 409 HP
    Bore 5.4 in
    Stroke 6.8 in
    Displacement 928 in³
    Note (3) Engine derate will commence at an altitude of 2743 m (8,999 ft).
    Note (2) Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
    Gross Power - Equivalent to U.S. EPA Tier 3/EU Stage IIIA - SAE J1995 409 HP
    Rated Power 1800 r/min
    Note (1) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
    Note (4) Optional Ventilation Reduction package available.
    Note (5) Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.

    Operating Specifications

    Nominal Payload Capacity 66139 lb
    Gross Machine Mass 132300 lb
    Body Capacities 11.3-17.5 m³ (14.8-22.9 yd³)

    Weights

    Empty 63647 lb
    Loaded 132277 lb
    Empty - Rear Axle 20704 lb
    Loaded - Rear Axle 73826 lb
    Empty - Front Axle 42944 lb
    Loaded - Front Axle 58451 lb

    Weight Distribution

    Empty - Rear Axle 32.50%
    Loaded - Front Axle 44.20%
    Loaded - Rear Axle 55.80%
    Empty - Front Axle 67.50%

    Transmission

    Forward - 1 3.9 mile/h
    Forward - 2 7 mile/h
    Forward - 3 12.9 mile/h
    Forward - 4 22.8 mile/h
    Reverse - 1 4.4 mile/h
    Note Maximum travel speeds with standard 26.5 × R25 tires.

    Final Drives

    Differential Ratio 3.38:1
    Final Drive Ratio 4.76:1
    Total Reduction Ratio 16.13:1
    Note Fully floating axles.

    Body Hoist

    Raise 10.5 s
    Lower 11.2 s
    Total Cycle Time 21.7 s

    Body Capacities

    Body 1 14.8 yd³
    Body 2 - Standard Body 18.8 yd³
    Body 3 22.9 yd³
    Wide Body 21.9 yd³
    Ejector Body (1) 19.9 yd³
    Ejector Body (2) 21.9 yd³
    Note Heaped SAE 2:1.

    Turning Dimensions

    Outside Clearance Radius 337.4 in
    Inner Clearance Radius 198 in
    Articulation Angle 42.5 °
    Frame Oscillation 10 Degrees

    Service Refill Capacities

    Engine Crankcase - With Filter 9 gal (US)
    Transmission 18 gal (US)
    Hydraulic Tank 38 gal (US)
    Cooling System 20 gal (US)
    Front Differential and Final Drives 15 gal (US)
    Rear Differential and Final Drives 15 gal (US)
    Fuel Tank 108 gal (US)

    Tires

    Tire Size 26.5 × R25 VSNT

    Standards

    Standards ROPS/FOPS Certified Cab