New CAT Equipment

995 Wheel Loader

Same Size, More Payload

Built to the same size as the 994K but offering a higher rated payload, the new Cat® 995 Wheel Loader gives you greater productivity and performance while using less fuel. It offers a one-pass reduction when loading Cat 785, 789 and 793 Mining Trucks — increasing production and efficiency up to 33% when loading the 785, up to 25% when loading the 789, and up to 20% with the 793. The 995 demonstrates 21% higher efficiency and 24% more production than the 994K in equal operating mode thanks to a higher rated payload and 6% increase in hydraulic force. In Enhanced Eco Mode, the 995 demonstrates up to a 30% increase in efficiency and an 11% reduction in hourly fuel consumption versus the 994K in throttle lock mode, which translates to 23% less CO2 per unit of material moved. It also offers a more comfortable operator environment and is infused with new technology features that allow additional gains in efficiency.

Get a Quote

    Fabick Cat needs this information to contact you about our products and services. You may unsubscribe from communications at any time. For more information, please review our Privacy Policy.

    Benefits

    Up to 24% More Productive

    With higher rated payload, 6% increase in hydraulic force and equal hydraulic cycle time vs. 994K

    Up to 21% More Efficient

    17% less CO2 per unit of material moved versus 994K in equal operating mode (throttle lock)

    Confident & Empowered Operators

    Thanks to options like Tire Slip Prevention, Lift Stall Prevention, Tire Set, Operator Coaching and more

    Learn more about the 995 Wheel Loader

    Watch

    • Axles
      Front
      Fixed
      Oscillation Angle
      9°
      Rear
      Trunnion
    • Brakes
      Brakes
      ISO 3450:2011
    • Complete System Fill
      Cooling System
      138 gal (US)
      Differential - Final Drives - Front
      220 gal (US)
      Differential - Final Drives - Rear
      200 gal (US)
      Engine Crankcase
      76 gal (US)
      Fuel Tank - Standard
      856 gal (US)
      Fuel Tank - With 24 hr Attachment
      1414 gal (US)
      Hydraulic Tank - Implement and Hydraulic Fan
      270 gal (US)
      Hydraulic Tank - Steering and Braking
      100 gal (US)
      Note
      *Not available on Tier 4 Final/Stage V machines. Not available in all regions.
      Oil Renewal System (ORS)*
      20 gal (US)
      Transmission
      110 gal (US)
    • Cooling System
      Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)
      131 °F
      Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)
      127.4 °F
      Ambient Capability Hydraulically Driven Demand Fan - Standard
      109.4 °F
    • Dimensions - High Lift - Approximate
      B-Pin Height - Maximum Lift
      31.6 ft
      Clearance at Maximum Lift
      22.6 ft
      Dump Angle at Maximum Lift
      –50.0 degrees
      Front Axle Centerline to Bucket Tip
      24.2 ft
      Ground to Bumper Clearance
      4.4 ft
      Ground to Center of Axles
      6 ft
      Ground to Lower Hitch Clearance
      2.9 ft
      Ground to Top of Exhaust Stacks
      23.2 ft
      Ground to Top of Hood
      18.6 ft
      Ground to Top of ROPS
      23.4 ft
      Maximum Overall Height - Bucket Raised
      42.1 ft
      Maximum Overall Length
      66.9 ft
      Note
      Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
      Rack Angle at Maximum Lift
      59.4 degrees
      Rack Back Angle - Carry
      53.5 degrees
      Rack Back Angle - Ground Level
      45 degrees
      Reach - Maximum Lift
      9.4 ft
      Rear Axle - Centerline to Bumper
      20.4 ft
      Tread Width
      14.1 ft
      Wheel Base
      22.3 ft
      Width - Over Tires - With Bulge
      18.8 ft
    • Dimensions - Standard Lift - Approximate
      B-Pin Height - Maximum Lift
      28.8 ft
      Clearance at Maximum Lift
      19.8 ft
      Dump Angle at Maximum Lift
      –50.0 degrees
      Front Axle Centerline to Bucket Tip
      21.9 ft
      Ground to Bumper Clearance
      4.4 ft
      Ground to Center of Axles
      6 ft
      Ground to Lower Hitch Clearance
      2.9 ft
      Ground to Top of Exhaust Stacks
      23.2 ft
      Ground to Top of Hood
      18.6 ft
      Ground to Top of ROPS
      23.4 ft
      Maximum Overall Height - Bucket Raised
      39.3 ft
      Maximum Overall Length
      64.6 ft
      Note
      Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
      Rack Angle at Maximum Lift
      59.5 degrees
      Rack Back Angle - Carry
      47.7 degrees
      Rack Back Angle - Ground Level
      39.7 degrees
      Reach - Maximum Lift
      9.6 ft
      Rear Axle - Centerline to Bumper
      20.4 ft
      Tread Width
      14.1 ft
      Wheel Base
      22.3 ft
      Width - Over Tires - With Bulge
      18.8 ft
    • Engine
      Bore
      6.7 in
      Displacement
      4766 in³
      Emissions
      U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
      Engine Model
      Cat® 3516E
      Engine Power - ISO 14396
      1847 HP
      Gross Power - SAE J1995
      1870 HP
      Net Power - SAE J1349 - High Ambient
      1696 HP
      Net Power - SAE J1349 - Standard Ambient
      1739 HP
      Note (1)
      The power ratings apply when tested under the reference conditions for the specified standard.
      Note (2)
      The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
      Note (3)
      The gross power advertised is with the fan at maximum speed.
      Peak Torque - 1,200 rpm - SAE J1995
      8549 lb/ft
      Stroke
      8.5 in
      Torque Rise
      39%
    • Hydraulic Cycle Times
      Dump
      3.1 s
      Lower Float Down
      4.2 s
      Rack Back
      4.9 s
      Raise
      12.6 s
    • Hydraulic System - Lift/Tilt
      Cylinders, Double Acting - Lift, Bore and Stroke
      370 × 1713 mm (14.6 × 67.4 in)
      Cylinders, Double Acting - Tilt, Bore and Stroke
      310 × 1086 mm (12.2 × 42.8 in)
      Lift/Tilt System - Circuit
      Positive Flow Control
      Lift/Tilt System - Pump
      Variable Displacement Piston
      Maximum Flow at 1,700 rpm Engine Speed
      541 gal/min
      Pilot System
      Open Loop and Pressure Reducing
      Relief Valve Setting - Lift/Tilt
      5004 psi
    • Hydraulic System - Steering
      Steering Cycle Times - High Idle
      4.3 s
      Steering Cycle Times - Low Idle
      7.6 s
      Steering System - Circuit
      Pilot, Load Sensing
      Steering System - Pump
      Piston, Variable Displacement
      Total Steering Angle
      80 degrees
    • Operating Specifications
      Bucket Capacity Range
      17.2-43.6 m3 (22.3-57 yd3)
      Cat Truck Match - High Lift
      789/793/794
      Cat Truck Match - Standard
      785/789
      Note
      *Please contact your local dealer to determine if your application is suitable for this increased rated payload.
      Operating Weight - High Lift
      547675 lb
      Operating Weight - Standard
      543772 lb
      Rated Payload - High Lift (Low to Moderate Digging Resistance)
      55 ton (US)
      Rated Payload - High Lift (Moderate to High Digging Resistance)
      50 ton (US)
      Rated Payload - Standard Lift (Low to Moderate Digging Resistance)
      60 ton (US)
      Rated Payload - Standard Lift (Moderate to High Digging Resistance)
      50 ton (US)
    • Sound Performance - Standard
      Machine Sound Level (ISO 6395:2008)
      119 dB(A)
      Note
      The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
      Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
      74 dB(A)
    • Sound Performance - Suppression
      Machine Sound Level (ISO 6395:2008)
      117 dB(A)
      Note
      The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
      Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
      73 dB(A)
    • Transmission
      Direct Drive - Forward 1
      Lock-up disables
      Direct Drive - Forward 2
      8.7 mile/h
      Direct Drive - Forward 3
      15.2 mile/h
      Direct Drive - Reverse 1
      Lock-up disables
      Direct Drive - Reverse 2
      9.6 mile/h
      Direct Drive - Reverse 3
      16.8 mile/h
      Forward - 1
      4.6 mile/h
      Forward - 2
      8 mile/h
      Forward - 3
      13.6 mile/h
      Note
      Travel speeds based on 58/85-57 tires.
      Reverse - 1
      5 mile/h
      Reverse - 2
      8.8 mile/h
      Reverse - 3
      14.9 mile/h
      Transmission Type
      Cat Planetary Power Shift
    POWER TRAIN
    • Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
    • Engine prelube
    • Fuel priming pump (electric)
    • Ground-level engine shutoff
    • Engine air intake (above hood) precleaner
    • Aluminum Modular Radiator (AMR)
    • Automatic, ether starting aid
    • Electronic throttle lock
    • Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
    • Rimpull control system
    • Planetary powershift, 3F/3R electronic control transmission
    • Delayed engine shutdown
    • Oil-cooled, multi-disc, service brakes
    • Electro-hydraulic parking brake
    LINKAGE
    • Standard lift
    ELECTRICAL
    • Alternator
    • Batteries, low maintenance
    • 10/15 amp, 24V to 12V converter
    • Disconnect switch to bumper
    • LED warning lights (pattern selectable)
    • LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
    • Emergency jump-start receptacle
    • Starter and transmission lockout in bumper
    • 24V starting and charging system
    • Electric starters
    OPERATOR ENVIRONMENT
    • Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
    • Bonded glass, tinted
    • Trainer seat
    • Dual-lever lift and tilt function controls
    • Implement kickouts
    • Air conditioner
    • Cab pressure indicator
    • Graphical touchscreen information display conveys real-time operating information
    • Heater, defroster, auto temperature controls
    • Powered cab precleaner
    • Operator presence status
    • Starting/charging system malfunction
    • Electronic OMM
    • Operator controls help
    • Two USB charging ports
    • CB mounting, 12V/24V power and antenna
    • 14-pin service port
    • 12V power
    • Selectable application profiles
    • Entertainment radio mute
    • Push-To-Start (PTS)
    • Warning/indicator instrumentation
    • Keypad control with indicator lights
    • Dome light in cab
    • Lunchbox and beverage holders
    • Electro-hydraulic force feedback steering
    • Vital Information Management System (VIMS™) with information display: external data port, cycle timer
    • Coat hook
    • Gauge instrumentation with configurable widgets:
      – Status indicators

      – Wheel rev counter

      – Simplified payload

      – Tire pressure monitoring system (optional)

      – Bucket angle

      – Coolant temperature

      – Hydraulic oil temperature

      – Fuel level

      – Power train oil temperature

      – Engine speed (tachometer)

      – Transmission gear

      – Ground speed

      – Engine hour meter

    SAFETY
    • Ground-access ladders
    • Rear-vision camera
    • Front frame access with steps
    • Front walkway around cab
    • Pump bay access ladders with T-handle and platform
    • Tie-offs on ROPS and radiator guards
    • Steering frame lock
    • Stairways on both sides of the machine
    • LED stairway and access lights
    • Toe kicks
    • Electric (field and shop) horns
    • Retractable seatbelt, 76 mm (3 in) wide
    • Trainer seat with lap belt, 76 mm (3 in) wide
    • Back-up alarm
    • Secondary steering
    MACHINE CONTROL AND GUIDANCE
    • MineStar™ Health ready
    • MineStar GUIDE ready
    • MineStar Edge ready
    FUEL TANK
    • 12 hour (3240 L/856 gal)
    COOLING
    • Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
    GROUND-LEVEL SERVICE CENTER
    • Service center light
    • Implement and cooling fan oil level indicator
    • Steering and brake oil level indicator
    • Window washer solvent level indicator
    • Transmission oil level indicator
    • DEF level indicator (if equipped)
    • Fuel level indicator
    • Engine oil level indicator
    • Engine coolant level indicator
    • Automatic lubrication system grease tank level indicator
    • DEF purge indicator lamp
    • Transmission lockout and LED
    • Starter lockout and LED
    • Heavy-duty battery disconnect switch
    • Stairway light switch
    • Service lighting switch (if equipped)
    • Fuel shutoff engine shutdown switch
    • Engine oil fast-fill port
    • Transmission oil fast-fill port
    • Steering and brake hydraulic oil fast-fill port
    • Steering and brake hydraulic oil drain port
    • Oil renewal system fast-fill port (if equipped)
    • Engine coolant fast-fill port
    • DEF fill port (HRC only)
    • Implement and cooling fan hydraulic oil fast-fill port
    • Implement and cooling hydraulic oil drain port
    • Automatic lubrication system grease tank fill port
    • 24V jump-start receptacle
    • 240V jacket water and engine oil heater plug (if equipped)
    • 12V power port
    • VIMS key switch
    • 14-pin machine data port
    SERVICE
    • EH steering eliminates need for neutralizer adjustment
    • In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
    • High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
    • Pump efficiency monitoring
    • Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
    • Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
    • Rock guards on linkage grease lines
    • Cat O-ring face seal couplings
    • Lockable service access doors
    • Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
    • High-speed engine oil change system
    • Ground-level fast-fill fuel system
    • Transmission guard
    • Drawbar hitch with pin
    • Cat XT™ hoses
    • Left-side service center
    • Oil sampling valves
    • Automatic Autolube filling shutoff valve
    • Telematics and Cat Electronic Technician service port in bumper
    • Air filter remaining useful life sensor
    • Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
    • Rear access to cab and service platform
    • Load-sensing steering
    • Supplemental steering system
    • Vandalism protection caplocks
    • Cooling cleanout service package
    • VIMS download and Cat Electronic Technician service port in bumper
    • Service lights (engine bay, service center)
    • EH steering eliminates need for neutralizer adjustment
    EFFICIENCY
    • On demand throttle, HP Plus, and Enhanced ECO Modes
    • Variable displacement implement pumps
    • Variable displacement load sensing steering
    • Variable displacement cooling fan pump
    • Torque converter lock-up clutch
    POWER TRAIN
    • Oil Renewal System (ORS)* (for increased time between oil changes)
    LINKAGE
    • High lift
    OPERATOR ENVIRONMENT
    • Rubber-mounted, high-impact resistant solar control glass
    • Trainer seat with suspension
    • Joystick lift and tilt function controls
    • Bluetooth®-enabled machine security
    • Sun screen, pull down (front and rear)
    • AM/FM/AUX radio
    • AM/FM/AUX/USB/BT/CD/SAT radio
    SAFETY
    • Powered ground-access stairs
    • Cat Detect (Rear Object Detection)
    • Wheel chocks
    COLD WEATHER
    • Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
    • Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
    • 240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
    • Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
    • Heated mirrors (recommended for below-freezing temperatures)
    MACHINE CONTROL AND GUIDANCE
    • Cat Payload with Overload Prevention
    • New Autodig Components:
      – Tire slip prevention

      – Lift stall prevention

      – Tire set

    • Operator coaching
    FUEL TANK
    • 24 hour (5350 L/1414 gal)
    COOLING
    • High ambient package (recommended for site conditions that do not exceed 53° C [127° F])
    RIMS AND TIRES
    • Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
    • Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
    • Tires – 58/85-57 84PR L4 (require 47" rims)
    SPARE RIMS
    • 1194 mm (47") 152 mm (44 × 57) (6") flange
    • 1194 mm (47") 127 mm (47 × 57) (5") flange
    SERVICE
    • Product Link™ satellite
    • Product Link cellular
    • Product Link (dual mode – satellite/cellular)
    • Additional service lights (pump bay, front frame and bumper)
    SOUND
    • Sound-suppression package

    Download Resources

    Site Map Legal Terms Privacy Policy Your Privacy Choices California Collection Notice Cookie Policy
    Copyright © 2024 Fabick Cat | All Rights Reserved.

    Fabick Cat & Fabick Rents – The Cat Rental Store are not affiliated with Fabick, Inc. Click here for more information.