New CAT Equipment

992 Wheel Loader

Setting the Standard. Then Raising the Bar.

The Cat® 992 Large Wheel Loader has set the standard in its size class for more than 50 years, delivering industry-leading productivity, unparalleled reliability and long life. Today’s 992 raises the bar. Compared to the 992K, the new 992 is up to 48% more efficient and 32% more productive, thanks to higher payload for improved pass match, increases in rimpull and breakout force, and an optimized linkage design. Extended component replacement intervals plus increased filter and turbo life help reduce maintenance costs. These improvements — and many more — combine to provide significant savings over the life of the machine for the lowest owning and operating costs in the industry. With both standard and high-lift configurations, the 992 offers the ideal pass match for fleets of Cat 775, 777 and 785 trucks.

Get a Quote

Benefits

Up to 32% More Productive

Thanks to higher rated payload, 9.5% more rimpull and 20% more breakout force

Up to 48% More Efficient

Increased productivity with zero increase in fuel burn

10% Reduction in Maintenance Costs

With 20% increase in component life, tire slip prevention and automatic retarding controls

Learn more about the 992 Wheel Loader

Watch

  • Axles
    Front
    Fixed
    Oscillation Angle
    ±9°
    Rear
    Trunnion
  • Brakes
    Brakes
    ISO 3450:2011
  • Buckets
    Bucket Capacities
    11.5-24.5 m³ (15-32 yd³)
  • Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard
    109.4 °F
    Ambient Capability, Hydraulically Driven Demand Fan - High
    131 °F
  • Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift
    24.5 ft
    Clearance at Maximum Lift
    17.2 ft
    Dump Angle at Maximum Lift
    -48.1 degrees
    Front Axle Centerline to Bucket Tip
    18.8 ft
    Ground to Bumper Clearance
    3.8 ft
    Ground to Center of Front Axle
    4.3 ft
    Ground to Lower Hitch Clearance
    2.2 ft
    Ground to Top of Exhaust Stacks
    17 ft
    Ground to Top of Hood
    13.1 ft
    Ground to Top of ROPS
    18.3 ft
    Maximum Overall Height - Bucket Raised
    32 ft
    Maximum Overall Length
    51.6 ft
    Rack Back Angle - Carry
    51.6 degrees
    Rack Back Angle - Ground Level
    42.5 degrees
    Rack Back Angle - Maximum Lift
    56.2 degrees
    Reach - Maximum Lift
    7.6 ft
    Rear Axle - Centerline to Bumper
    13.5 ft
    Tread Width
    10.83 ft
    Wheel Base
    19.3 ft
    Width - Over Tires - With Bulge
    14.75 ft
  • Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift
    22.8 ft
    Clearance at Maximum Lift
    15.2 ft
    Dump Angle at Maximum Lift
    -49.5 degrees
    Front Axle Centerline to Bucket Tip
    18 ft
    Ground to Bumper Clearance
    3.8 ft
    Ground to Center of Front Axle
    4.3 ft
    Ground to Lower Hitch Clearance
    2.2 ft
    Ground to Top of Exhaust Stacks
    17 ft
    Ground to Top of Hood
    13.1 ft
    Ground to Top of ROPS
    18.3 ft
    Maximum Overall Height - Bucket Raised
    30.8 ft
    Maximum Overall Length
    50.8 ft
    Rack Back Angle - Carry
    48.9 degrees
    Rack Back Angle - Ground Level
    40.2 degrees
    Rack Back Angle - Maximum Lift
    56.9 degrees
    Reach - Maximum Lift
    8.2 ft
    Rear Axle - Centerline to Bumper
    13.5 ft
    Tread Width
    10.83 ft
    Wheel Base
    19.3 ft
    Width - Over Tires - With Bulge
    14.74 ft
  • Engine
    Bore
    5.7 in
    Displacement
    1963.5 in³
    Emissions
    U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
    Engine Model
    Cat® C32B
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient
    931 hp
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard
    893 hp
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient
    921 hp
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard
    884 hp
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard
    907 hp
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient
    944 hp
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard
    900 hp
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient
    937 hp
    Net Power
    814 hp
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient
    823 hp
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard
    823 hp
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient
    814 hp
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard
    814 hp
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm
    3570 ft·lbf
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm
    3537 ft·lbf
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm
    3555 ft·lbf
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm
    3514 ft·lbf
    Rated Speed
    1750 rpm
    Stroke
    6.4 in
  • Hydraulic Cycle Times
    Dump
    2.6 s
    Dump - High Lift
    2.6 s
    Float Down
    3.2 s
    Float Down - High Lift
    3.2 s
    Rack Back
    2.3 s
    Rack Back - High Lift
    2.3 s
    Raise
    9 s
    Raise - High Lift
    9 s
    Total Hydraulic Cycle Time
    17.1 s
  • Hydraulic System - Lift/Tilt
    Lift Cylinder - Bore
    9.3 in
    Lift Cylinder - Stroke
    63.5 in
    Lift/Tilt System - Circuit
    Positive Flow Control
    Lift/Tilt System - Pump
    Variable Displacement Piston
    Maximum Flow at 2,165 rpm
    250 gpm
    Relief Valve Setting - Lift/Tilt
    5000 psi
    Tilt Cylinder - Bore
    11.5 in
    Tilt Cylinder - Stroke
    41.5 in
  • Hydraulic System - Steering
    Maximum Flow at 1,400-1,850 rpm
    70 gpm
    Steering Cut Off Pressure
    4500 psi
    Steering Cycle Times - High Idle
    3.1 s
    Steering Cycle Times - Low Idle
    4.9 s
    Steering System - Circuit
    Pilot, Load Sensing
    Steering System - Pump
    Piston, Variable Displacement
    Total Steering Angle
    80°
  • Operating Specifications
    Bucket Capacity Range
    11.5-24.5 m³ (15-32 yd³)
    Cat Truck Match - High Lift
    785
    Cat Truck Match - Standard
    775/777
    Operating Weight
    233430 lb
    Rated Payload - High Lift
    22.5 ton (US)
    Rated Payload - High Lift (Material Handler)
    27 ton (US)
    Rated Payload - Standard
    25.5 ton (US)
    Rated Payload - Standard (Material Handler)
    30 ton (US)
  • Service Refill Capacities
    Cooling Systems
    59.4 gal (US)
    Crankcase
    31.7 gal (US)
    Differential - Final Drives - Front
    96.4 gal (US)
    Differential - Final Drives - Rear
    96.4 gal (US)
    Fuel Tank
    385.7 gal (US)
    Hydraulic Factory Fill (Steering)
    32.5 gal (US)
    Hydraulic System Factory Fill (Implement)
    104.1 gal (US)
    Hydraulic Tank (Steering Tank Only)
    26.3 gal (US)
    Hydraulic Tank - Implement
    60.2 gal (US)
    Transmission
    51.5 gal (US)
  • Sound Performance - Standard
    Note
    Machine Sound Level (ISO 6396:2008) - 116 dB(A)
  • Sound Performance - Suppression
    Note
    Machine Sound Level (ISO 6396:2008) - 113 dB(A)
  • Transmission
    Direct Drive - Forward 1
    Disabled
    Direct Drive - Forward 2
    8 mile/h
    Direct Drive - Forward 3
    14 mile/h
    Direct Drive - Reverse 1
    5 mile/h
    Direct Drive - Reverse 2
    8.8 mile/h
    Direct Drive - Reverse 3
    15.3 mile/h
    Forward - 1
    4.3 mile/h
    Forward - 2
    7.4 mile/h
    Forward - 3
    12.7 mile/h
    Reverse - 1
    4.7 mile/h
    Reverse - 2
    8.1 mile/h
    Reverse - 3
    13.9 mile/h
    Transmission Type
    Cat Planetary Powershift
POWER TRAIN
  • Engine, C32B
  • Fuel priming pump (electric)
  • Ground-level engine shutdown
  • Engine air intake (above hood) precleaner
  • Aluminum Modular Radiator (AMR)
  • Automatic, ether starting aid
  • Electronic throttle lock
  • Impeller Clutch Torque Converter (ICTC) with lock-up clutch
  • Rimpull control system
  • Planetary powershift, 3F/3R electronic control transmission
  • Delayed engine shutdown
  • Oil-cooled, multi-disc, service brakes
  • Electro-hydraulic parking brake
  • Auto retarding controls
  • Brake temp estimator
  • Autoshift
LINKAGE
  • Standard lift (23 tonnes/25.5 tons face, 27.2 tonnes/30 tons loose)
EFFICIENCY
  • Variable displacement implement pumps
  • Variable displacement load-sensing steering
  • Variable displacement cooling fan pump
  • Torque converter lock-up clutch
  • Bucket float
  • Automatic bucket controls:
    – Lift kickout
    – Return-to-dig kickout
  • Default on-demand throttle (economy mode) with HP+ mode button
  • Engine idle shutdown
ELECTRICAL AND LIGHTING
  • 150-amp alternator
  • Four 1400 CCA batteries
  • 10/15 amp, 24V to 12V converter
  • Battery – single pole (master disconnect) isolator
  • Emergency jump-start receptacle
  • Starter and transmission lockout in bumper
  • 24V starting and charging system
  • Electric starters
  • Live line indicators in service center
  • LED warning lights (pattern selectable)
  • LED lighting system:
    – Two front- and rear-mounted LED turn signals
    – Four forward-facing running lights
    – Three forward-facing flood lights
    – Four platform-mounted flood lights
    – Two forward-facing high beams
    – Four rear-facing floods
    – Four stairway lights
    – Two engine bay service lights
OPERATOR ENVIRONMENT
  • Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
  • Bonded glass, tinted
  • Trainer seat
  • Dual-lever lift and tilt function controls
  • Implement kickouts
  • Air conditioner
  • Cab pressure indicator
  • Graphical touchscreen information display conveys real-time operating information and payload measurement
  • Heater, defroster, auto temperature controls
  • Gauge instrumentation with configurable widgets:
    – Status indicators
    – Wheel rev counter
    – Simplified payload
    – TPMS (optional)
    – Bucket angle
    – Coolant temperature
    – Hydraulic oil temperature
    – Fuel level
    – Power train oil temperature
    – Engine speed (tachometer)
    – Transmission gear
    – Ground speed
    – Engine hour meter
  • Powered cab precleaner
  • Operator presence status
  • Starting/charging system malfunction
  • Electronic OMM
  • Operator controls help
  • Two USB charging ports
  • CB mounting, 12V/24V power and antenna
  • 14-pin service port
  • 12V power
  • Selectable application profiles
  • Entertainment radio mute
  • Push-To-Start (PTS)
  • Warning/indicator instrumentation
  • Keypad control with indicator lights
  • Dome light in cab
  • Lunchbox and beverage holders
  • Electro-hydraulic force feedback steering
  • Vital Information Management System (VIMS™) with information display: external data port, cycle timer
  • Coat hook
SAFETY
  • Ground-access ladders
  • Rear-vision camera
  • Front walkway around cab
  • Tie-offs on ROPS
  • Steering frame lock
  • Stairways on both sides of the machine
  • Platform toe kicks
  • Retractable seatbelt, operator and trainer seat
  • Back-up alarm
  • Electric disc horns
  • Implement lock switch
  • Seatbelt warning
  • Entertainment radio mute
MACHINE CONTROL AND GUIDANCE
  • MineStar Health ready
    MineStar GUIDE ready
    MineStar Edge ready
COOLING
  • Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
SERVICE
  • Ground-level service center including:
    – Implement and cooling fan oil level indicator
    – Steering and brake oil level indicator
    – Window washer fluid level indicator
    – Transmission oil level indicator
    – Fuel level indicator
    – Engine oil level indicator
    – Engine coolant level indicator
    – Automatic lubrication system grease tank level indicator
    – Starter lockout and LED
    – Heavy-duty battery disconnect switch
    – Stairway light switch
    – Service lighting switch (if equipped)
    – Fuel shutoff engine shutdown switch
    – Engine oil fast-fill port
    – Transmission oil fast-fill port
    – Steering and brake hydraulic oil fast-fill port
    – Steering and brake hydraulic oil drain port
    – Engine coolant fast-fill port
    – Implement and cooling fan hydraulic oil fast-fill port
    – Implement and cooling fan hydraulic oil drain port
    – Automatic lubrication system grease tank fill port
    – 24V jump-start receptacle
    – 12V power port
    – 120V jacket water plug (if equipped)
    – 240V jacket water plug (if equipped)
    – VIMS key switch
    – 14-pin service port
    – Transmission lockout and LED
  • In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
  • High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
  • Implement pump efficiency monitoring
  • Rock guards on linkage grease lines
  • Cat O-ring face seal couplings
  • Lockable service access doors
  • Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
  • Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
  • Ground-level fast-fill fuel system
  • Drawbar hitch with pin
  • Cat XT™ hoses
  • Left-side service center
  • Oil sampling valves
  • Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
  • Rear access to cab and service platform
  • Load-sensing steering
  • Vandalism protection caplocks
  • Cooling cleanout service access
  • Telematics and Cat Electronic Technician service port in bumper
  • Automatic Autolube filling shutoff valve
POWER TRAIN
  • Advanced auto retarding controls with engine brake
LINKAGE
  • High lift (20.5 tonnes/22.5 tons face, 24.5 tonnes/27 tons loose)
ELECTRICAL AND LIGHTING
  • Dual pole battery isolator
  • Six service lights
  • Two hitch-mounted lights
OPERATOR ENVIRONMENT
  • Rubber-mounted, high-impact resistant solar control glass
  • Trainer seat with suspension
  • Joystick lift and tilt function controls
  • Bluetooth®-enabled machine security
  • Sun screen, pull down (front and rear)
  • AM/FM/AUX radio
  • AM/FM/AUX/USB/BT/CD/SAT radio
SAFETY
  • Powered ground-access stairs
  • Side-vision cameras (270 degree)
  • Cat Detect (rear object detection)
  • Wheel chocks
  • Secondary steering
  • Electric trumpet field horn plus electric shop horn
  • Fire suppression ready (tank mounting provision and provision for integration with machine electronics for monitoring faults or activation)
  • Emergency stop system
COLD WEATHER
  • Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
  • 120V or 240V coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
  • Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
  • Heated mirrors
MACHINE CONTROL AND GUIDANCE
  • Cat Payload with Overload Prevention
  • New Autodig Components:
    – Tire slip prevention
    – Lift stall prevention
    – Tire set
  • Operator coaching
COOLING
  • High ambient package (recommended for site conditions that do not exceed 55° C [131° F])
RIMS AND TIRES
  • Rims – 914.4 mm (36") (36 × 45)
    113.3 mm (4.5") flange
    For use with 45/65R45 and 45/65-45 tires
    Tires – 45/65R45
    Tires – 45/65-45
SPARE RIMS
  • 914.4 mm (36") (36 × 45) (4.5") flange
SERVICE
  • Transmission and engine guards
  • Diagnostic lines for easy troubleshooting access
  • Product Link™ cellular
  • Product Link (dual mode – satellite/cellular)
SOUND
  • Sound-suppression package
LOAD AND CARRY OR EXTENSIVE TRAMMING
  • Ride control

Download Resources

Site Map Legal Terms Privacy Policy Your Privacy Choices California Collection Notice Cookie Policy
Copyright © 2026 Fabick Cat | All Rights Reserved.

Fabick Cat & Fabick Cat Rentals are not affiliated with Fabick, Inc. Click here for more information.