New CAT Equipment

930M Waste Handler Small Wheel Loader

The Cat® 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Get a Quote

    Learn more about the 930M Waste Handler Small Wheel Loader

    Watch

    Product Specs

    Engine

    Maximum Gross Power 168 HP
    Bore 4 in
    Stroke 5 in
    Displacement 427 in³
    Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 168 HP
    Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 r/min
    Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 601 ft·lbf
    Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 r/min
    Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 586 ft·lbf
    Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 160 HP
    Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) 588 ft·lbf
    Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 573 ft·lbf
    Emissions The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards.
    Engine Model Cat® C7.1
    Note (1) *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
    Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) 572 ft·lbf
    Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) 587 ft·lbf
    Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) 166 HP
    Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) 170 HP
    Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 163 HP
    Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 164 HP
    Engine Power - ISO 14396 - Metric 170 HP
    Engine Power - ISO 14396 168 HP
    Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) 162 HP
    Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 158 HP
    Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 156 HP
    Net Power (Standard Power Mode: Range 1-3*) 1600 r/min
    Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 156 HP
    Net Power (Performance Power Mode: Range 1-4) 1800 r/min

    Buckets

    Bucket Capacities 3.0-5.0 m3 (3.9-6.5 yd3)

    Operating Specifications

    Note (2) ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.
    Note (1) **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.
    Full Turn Tip Load (2) 9525 kg (20,998 lb)^
    Full Turn Tip Load (1) 8573 kg (18,900 lb)**

    Weights

    Operating Weight 37713 lb
    Note (2) ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.
    Note (1) **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.
    Operating Weight (1) 15 381 kg (33,908 lb)**
    Operating Weight (2) 17 107 kg (37,713 lb)^

    Cab

    ROPS ISO 3471:2008
    FOPS ISO 3449:2005 LEVEL II
    Note (1) * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
    – The Blue Angel environmental label is an optional attachment for Europe only.
    Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* 68 dB(A)
    Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* 101 dB(A)

    Air Conditioning System

    Air Conditioning The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

    Loader Hydraulic System

    Maximum Flow - Implement Pump 50 gal/min
    Maximum Working Pressure - Implement Pump 3771 psi
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) 5.1/5.7 seconds
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure 4061 psi
    Relief Pressure - Tilt Cylinder 4061 psi
    Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) 1.5/1.7 seconds
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) 2.7/2.7 seconds
    Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Maximum Flow - Implement Pump - 4th Function Maximum Flow* 42 gal/min
    Note (3) * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure 4061 psi
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time 9.3/10.1 seconds
    Maximum Flow - Implement Pump - 3rd Function Maximum Flow* 50 gal/min
    Lift Cylinder: Standard Lift Linkage - Stroke 28.7 in
    Tilt Cylinder: Standard Lift Linkage - Bore Diameter 5.9 in
    Lift Cylinder: Standard Lift Linkage - Bore Diameter 4.7 in
    Lift Cylinder: Standard Lift Linkage - Rod Diameter 2.6 in
    Tilt Cylinder: Standard Lift Linkage - Rod Diameter 3.5 in
    Tilt Cylinder: Standard Lift Linkage - Stroke 21.9 in

    Steering

    Steering Cylinder, Double Acting - Bore Diameter 2.8 in
    Steering Cylinder, Double Acting - Rod Diameter 1.6 in
    Maximum Steering Torque - 0° (Straight Machine) 37155 ft·lbf
    Steering Cylinder, Double Acting - Stroke 17.2 in
    Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s
    Maximum Working Pressure - Steering Pump 3500 psi
    Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s
    Maximum Steering Torque - 40° (Full Turn) 27747 ft·lbf
    Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
    Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Maximum Flow - Steering Pump 34 gal/min

    Transmission

    Forward and Reverse - Range 4 25 mile/h
    Forward and Reverse - Range 3 17 mile/h
    Forward and Reverse - Range 2 8 mile/h
    Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
    Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph)

    Power Train

    Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees
    Note (3) Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
    Note (2) Offset rims available to meet European roading requirements.
    Rear Axle Oscillating
    Front Axle Fixed
    Brakes - Parking Spring applied hydraulically released
    Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
    Front Axle - Traction Aid Locking differential
    Rear Axle - Traction Aid - Optional Limited slip differential
    Brakes - Service Inboard wet disc
    Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder ± 7 degrees

    Service Refill Capacities

    Cooling System 7.9 gal (US)
    Engine Crankcase 5.3 gal (US)
    Axles - Rear 6.6 gal (US)
    Hydraulic Tank 23.8 gal (US)
    Transmission - Gear Box 2.2 gal (US)
    Fuel Tank 51.5 gal (US)
    Axles - Front 6.9 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 5 gal (US)
    Hydraulic System - Including Tank 43.6 gal (US)

    Sustainability

    Recyclability 94%