New CAT Equipment

930M Aggregate Handler Small Wheel Loader

The Cat® 930M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Get a Quote

Learn more about the 930M Aggregate Handler Small Wheel Loader

Watch

Product Specs

Engine

Maximum Rated Gross Power - ISO 14396 164 HP
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 164 HP
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) 166 HP
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 157 HP
Maximum Rated Gross Power - ISO 14396 (DIN) 166 HP
Engine Model Cat® C7.1
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 r/min
Rated Net Power 157 HP
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 160 HP
Maximum Gross Power 168 HP
Bore 4 in
Stroke 5 in
Displacement 427 in³
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 r/min
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 592 ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 592 ft·lbf
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 156 HP
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) 162 HP
Note (4) Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 160 HP
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) 566 ft·lbf
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 566 ft·lbf
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) 162 HP
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*) 572 ft·lbf
Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 158 HP
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4) 572 ft·lbf
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 154 HP
Note (1) * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Buckets

Bucket Capacities 2.5-2.7 m3 (3.3-3.5 yd3)

Weights

Operating Weight 31144 lb

Cab

ROPS ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Note (2) The Blue Angel environmental label is an optional attachment for Europe only.
Note (1) * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.

Power Train

Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees
Rear Axle Oscillating
Brakes - Parking Spring applied hydraulically released
Rear Axle - Traction Aid - Optional Limited slip differential
Front Axle Fixed
Brakes - Service Inboard wet disc
Note (2) Offset rims available to meet European roading requirements.
Front Axle - Traction Aid** Locking differential (standard)
Note (3) **Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Loader Hydraulic System

Lift Cylinder, Double Acting - Rod Diameter 2.6 in
Maximum Flow - Implement Pump 50 gal/min
Relief Pressure - Tilt Cylinder 4061 psi
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) 5.1/5.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) 1.5/1.7 seconds
Lift Cylinder, Double Acting - Stroke 28.7 in
Tilt Cylinder, Double Acting - Rod Diameter 3.5 in
Tilt Cylinder, Double Acting - Stroke 21.9 in
Lift Cylinder, Double Acting - Bore Diameter 4.7 in
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) 2.7/2.7 seconds
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
Tilt Cylinder, Double Acting - Bore Diameter 5.9 in
Maximum Flow - Implement Pump - 3rd Function* 50 gal/min
Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3626 psi
Maximum Working Pressure - Implement Pump 3626 psi
Note (3) * 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time 9.3/10.1 seconds

Transmission

Forward and Reverse - Range 3 17 mile/h
Note * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2 8 mile/h
Forward and Reverse - Range 4 25 mile/h

Service Refill Capacities

Rear Axles 6.6 gal (US)
Front Axles 6.9 gal (US)
Hydraulic Tank 23.8 gal (US)
Engine Crankcase 5.3 gal (US)
Diesel Exhaust Fluid (DEF) Tank 5 gal (US)
Transmission - Gear Box 2.2 gal (US)
Cooling System 7.9 gal (US)
Hydraulic System - Including Tank 43.6 gal (US)
Fuel Tank 51.5 gal (US)

Steering

Maximum Steering Torque - 0° (Straight Machine) 37155 ft·lbf
Maximum Steering Torque - 40° (Full Turn) 27747 ft·lbf
Maximum Flow - Steering Pump 34 gal/min
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s
Maximum Working Pressure - Steering Pump 3500 psi
Steering Cylinder, Double Acting - Bore Diameter 2.8 in
Steering Cylinder, Double Acting - Rod Diameter 1.6 in
Steering Cylinder, Double Acting - Stroke 17.2 in
Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Operating Specifications

Full Turn Tip Load 19563 lb