New CAT Equipment

930M Ag Handler Small Wheel Loader

Configured for Success

The Cat® 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A power boost in Range 1 for silage work maximizes productivity, while a boost in Range 4 gets you to the farm or field faster. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Get a Quote

    Fabick Cat needs this information to contact you about our products and services. You may unsubscribe from communications at any time. For more information, please review our Privacy Policy.

    Benefits

    Reduced By 30% Engine Speed

    Lower engine speed lowers fuel burn.

    MORE Control

    More refined control with consistent and predictable stopping distances.

    Class Leading 68 dB(A) Sound Level

    When running at 1,600 RPM in Standard Mode.

    Learn more about the 930M Ag Handler Small Wheel Loader

    Watch

    https://youtu.be/GCm9JMoCnwc
    • Air Conditioning System
      Air Conditioning
      The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
    • Axles
      Front
      Fixed; Locking differential (standard)
      Rear
      Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
    • Buckets
      Bucket Capacities
      2.1-5.0 m³ (2.7-6.5 yd³)
      Bucket Capacities - Light Material
      3.1-5.0 m³ (4.0-6.5 yd³)
    • Cab
      Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
      101 dB(A)
      Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
      68 dB(A)
      FOPS
      ISO 3449:2005 Level II
      Note (1)
      *The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
      ROPS
      ISO 3471:2008
    • Dimensions with Bucket - High Lift
      Articulation Angle
      40 °
      Carry Height - Bucket Pin
      1.9 ft
      Clearance - Bucket at 45°*
      10.7 ft
      Clearance - Level Bucket**
      13.4 ft
      Clearance - Load over Height**
      11.6 ft
      Departure Angle
      33 °
      Dig Depth**
      5.3 in
      Dump Angle at Full Lift
      48 °
      Height - Bucket Pin**
      14.4 ft
      Height - Ground Clearance**
      1.3 ft
      Height - Ground to Axle Center**
      2.25 ft
      Height - Ground to Beacon**
      12.2 ft
      Height - Ground to Cab**
      10.9 ft
      Height - Overall**
      18.7 ft
      Length - Hitch to Front Axle
      4.9 ft
      Length - Overall*
      27 ft
      Length - Rear Axle to Bumper
      6.5 ft
      Length - Wheel Base
      9.8 ft
      Note (1)
      *Vary with bucket.
      Note (2)
      **Vary with tire.
      Note (3)
      Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
      Operating Weight
      31441 lb
      Rack Angle at Carry
      47 °
      Rack Angle at Full Lift
      51 °
      Reach - Bucket at 45°*
      4.4 ft
      Turning Radius - Inside of Tires
      9.4 ft
      Turning Radius - Outside of Tires
      17.7 ft
      Turning Radius - Over Bucket
      20.6 ft
      Width - Bucket
      8.4 ft
      Width - Over Tires
      8.3 ft
      Width - Tread Center
      6.3 ft
    • Dimensions with Bucket - Standard Lift
      Articulation Angle
      40 °
      Carry Height - Bucket Pin
      1.3 ft
      Clearance - Bucket at 45°*
      9.1 ft
      Clearance - Level Bucket**
      11.75 ft
      Clearance - Load over Height**
      10.9 ft
      Departure Angle
      33 °
      Dig Depth**
      3.9 in
      Dump Angle at Full Lift
      48 °
      Height - Bucket Pin**
      12.8 ft
      Height - Ground Clearance**
      1.3 ft
      Height - Ground to Axle Center**
      2.25 ft
      Height - Ground to Beacon**
      12.2 ft
      Height - Ground to Cab**
      10.9 ft
      Height - Overall**
      17.1 ft
      Length - Hitch to Front Axle
      4.9 ft
      Length - Overall*
      24.9 ft
      Length - Rear Axle to Bumper
      6.5 ft
      Length - Wheel Base
      9.8 ft
      Note (1)
      *Vary with bucket.
      Note (2)
      **Vary with tire.
      Note (3)
      Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
      Operating Weight
      31125 lb
      Rack Angle at Carry
      43 °
      Rack Angle at Full Lift
      54 °
      Reach - Bucket at 45°*
      3.6 ft
      Turning Radius - Inside of Tires
      9.4 ft
      Turning Radius - Outside of Tires
      17.7 ft
      Turning Radius - Over Bucket
      19.5 ft
      Width - Bucket
      8.4 ft
      Width - Over Tires
      8.3 ft
      Width - Tread Center
      6.3 ft
    • Engine
      Bore (Standard Power Mode: Range 1-3**)
      4.1 in
      Bore (Standard Power Mode: Range 1-4)
      4.1 in
      Displacement (Performance Power Mode: Speed Range 1-4)
      428 in³
      Displacement (Standard Power Mode: Range 1-3**)
      428 in³
      Emissions
      Engine meets U.S. EPA Tier 4 Final emission standards.
      Engine Model
      Cat® C7.1
      Maximum Gross Power
      168 HP
      Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
      170 HP
      Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
      168 HP
      Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**)
      160 HP
      Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**)
      162 HP
      Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
      1800 r/min
      Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**)
      1600 r/min
      Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
      601 ft·lbf
      Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**)
      795 N·m
      Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
      587 ft·lbf
      Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**)
      776 N·m
      Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
      797 N·m
      Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**)
      573 ft·lbf
      Maximum Rated Gross Power - ISO 14396
      168 HP
      Maximum Rated Gross Power - ISO 14396 (metric)
      170 mhp
      Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
      166 HP
      Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
      158 HP
      Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
      164 HP
      Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
      156 HP
      Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
      163 HP
      Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
      156 HP
      Note (1)
      *The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
      Note (2)
      **Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
      Note (3)
      Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
      Note (4)
      No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
      Stroke (Standard Power Mode: Range 1-3**)
      5.3 in
      Stroke - Performance Power Mode: Range 1-4
      5.3 in
    • Loader Hydraulic System
      Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)
      1.7 s
      Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)
      2.7 s
      Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)
      5.7 s
      Cycle Times - 1,600 rpm - Standard: Total Cycle Time
      10.1 s
      Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)
      1.5 s
      Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)
      2.7 s
      Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)
      5.1 s
      Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time
      9.3 s
      Lift Cylinder: Standard Lift Linkage - Bore Diameter
      4.3 in
      Lift Cylinder: Standard Lift Linkage - Rod Diameter
      2.4 in
      Lift Cylinder: Standard Lift Linkage - Stroke
      28.7 in
      Maximum Flow - Implement Pump
      50 gal/min
      Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
      50 gal/min
      Maximum Flow - Implement Pump - 4th Function Maximum Flow*
      42 gal/min
      Maximum Working Pressure - Implement Pump
      4061 psi
      Note
      *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
      Note (1)
      Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
      Note (2)
      Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
      Relief Pressure - Tilt Cylinder
      4351 psi
      Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
      4061 psi
      Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
      4351 psi
      Tilt Cylinder: Standard Lift Linkage - Bore Diameter
      5.1 in
      Tilt Cylinder: Standard Lift Linkage - Rod Diameter
      2.8 in
      Tilt Cylinder: Standard Lift Linkage - Stroke
      21.9 in
    • Operating Specifications
      Full Turn Tip Load
      19424 lb
    • Power Train
      Brakes - Parking
      Spring applied hydraulically released
      Brakes - Service
      Inboard wet disc
      Front Axle
      Fixed
      Front Axle - Traction Aid*
      Locking differential standard
      Note
      *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).
      Note (2)
      Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
      Rear Axle
      Oscillating
      Rear Axle - Oscillation Angle by Tire Size - 20.5 R25
      ± 10.5 degrees
      Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65
      ± 7 degrees
      Rear Axle - Traction Aid
      Limited slip differential optional
    • Service Refill Capacities
      Axles - Front
      6.9 gal (US)
      Axles - Rear
      6.6 gal (US)
      Cooling System
      7.9 gal (US)
      Diesel Exhaust Fluid (DEF) Tank
      5 gal (US)
      Engine Crankcase
      5.3 gal (US)
      Fuel Tank
      51.5 gal (US)
      Hydraulic System - Including Tank
      43.6 gal (US)
      Hydraulic Tank
      23.8 gal (US)
      Transmission - Gear Box
      2.2 gal (US)
    • Steering
      Maximum Flow - Steering Pump
      34 gal/min
      Maximum Working Pressure - Steering Pump
      3500 psi
      Note (1)
      Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
      Note (2)
      Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
      Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
      3.5 turns
      Steering Articulation Angle - Each Direction
      40°
      Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
      2.4 s
      Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
      2.8 s
      Steering Cylinder, Double Acting - Bore Diameter
      2.8 in
      Steering Cylinder, Double Acting - Rod Diameter
      1.6 in
      Steering Cylinder, Double Acting - Stroke
      17.2 in
    • Sustainability
      Recyclability
      94%
    • Tires
      Note (1)
      Other tire choices are available. Contact your Cat dealer for details.
      Note (2)
      Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
      Other Choices Include
      20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX
      Standard Size
      20.5 R25, radial (L-3)
    • Transmission
      Forward - Range 1*
      1-13 km/h (0.6-8 mph)
      Forward - Range 2
      8 mile/h
      Forward - Range 3
      17 mile/h
      Forward - Range 4
      25 mile/h
      Note
      Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintained at 13 km/h (8 mph) in Range 1 for a quick reverse.
      Reverse - Range 1*
      8 mile/h
      Reverse - Range 2
      8 mile/h
      Reverse - Range 3
      17 mile/h
      Reverse - Range 4
      25 mile/h
    • Weights
      Operating Weight
      31382 lb
    POWER TRAIN
    • Auto idle shut down feature
    • Cat C7.1 engine
      • Power modes (Standard and Performance)
      • Power by range (High Power in Range 4)
      • Turbocharged and aftercooled
      • Diesel particulate filter (Fit for Life)
    • Coded start (requires secondary display)
    • Differential lock in front axle
    • Enclosed wet disc full hydraulic brakes
    • Oil sampling ports
    • Hydraulically driven demand cooling fan
    • Hydrostatic transmission with electronic control
      • Operator modes (Default, TC, Hystat™, and Ice)
      • Directional Shift Aggressiveness (fast, medium, slow)
      • Rimpull control, adjust wheel torque
      • Creeper control, adjust ground speed
    • Axle Duo-Cone™ seal guards
    • Parking brake, electric
    • Single plane cooling package wide six fins per inch density
    • Throttle lock and max speed limiter
    HYDRAULICS
    • Automatic lift lower and tilt kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow)
    • Hydraulic response setting (fast, medium, slow)
    • Load sensing hydraulics and steering
    • Load sensing hydraulics and steering
    ELECTRICAL
    • Alternator, 115 amp, heavy duty
    • Batteries, 1,000 CCA (2) 24V system, disconnect switch
    • Back-up alarm
    • Halogen work and roading lights, LED rear tail lights
    • Product Link™ PRO with three year subscription
    • Remote jump start post
    • Resettable main and critical function breakers
    OPERATOR ENVIRONMENT
    • Cab, pressurized
    • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • External heated mirrors with lower parabolic
    • Hydraulic control lockout
    • Ground level cab door release
    • Suspension seat, fabric
    • Lunch box storage
    • Radio ready speakers
    • Rear window defrost, electric
    • Mirror, single
    • Column mounted multi function control – lights, wipers, turn signal
    • Tilt and telescopic steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
    • Camera, rear view
    OTHER STANDARD EQUIPMENT
    • Cat optimized Z-bar linkage with parallel lift
    • Large-access enclosure doors with adjustable close/open force
    • Recovery hitch, with pin
    • Remote mounted lubrication points
    • Lockable compartments and enclosures
    OPTIONAL EQUIPMENT
    • Auto lube, integrated in secondary display
    • Auxiliary flow, third and fourth function
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe)
      • Camera, rear view integrated into advanced display
      • Electrically adjustable external heated mirrors (2)
      • Secondary display to enable features and adjust parameters
      • LED interior lighting
      • Sunscreen, front and rear
      • Touchscreen secondary display
      • Ride control adjustable speed activation
      • Preventative maintenance reminders
      • Integrated help function (26 languages)
    • Camera, roof mounted, front view with separate display
    • Cat Production Measurement weigh scale system integrated into secondary display
    • Cold start package
      • Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
    • Coupler, (Fusion and ISO 23727)
    • Fenders (extended cover and full coverage)
    • Differential, limited slip, rear
    • Guarding packages
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Linkage, high lift
    • Payload Technology
      • Cat Production Measurement (CPM)
      • CPM Printer
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Ride Control System, adjustable through secondary display
    • Seats
      • Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
      • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      • Dual mode and secondary
    • Tire Pressure Monitoring (TPM)
    • Counterweight, additional options
    • Debris packages (low, medium, high)
    • Rear Object Detection

    Download Resources

    Site Map Legal Terms Privacy Policy Your Privacy Choices California Collection Notice Cookie Policy
    Copyright © 2024 Fabick Cat | All Rights Reserved.

    Fabick Cat & Fabick Rents – The Cat Rental Store are not affiliated with Fabick, Inc. Click here for more information.