New CAT Equipment

930 Small Wheel Loader

Configured for Success

The 930 Small Wheel Loader sets the standard for productivity, fuel efficiency, operator comfort and low operating costs. Experience the industry benchmark.

Get a Quote

Benefits

AUTO ENGINE MODE

Reduces fuel consumption at low idle.

Extended Service Intervals

From 500 to 1000 hours, substantially lowers service costs.

AUTO WHEEL TORQUE

Adjusts rim pull, reducing tire spin and tire wear.

Learn more about the 930 Small Wheel Loader

Watch

  • Air Conditioning System
    Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons).
  • Axles
    Front
    Fixed; Locking differential (standard)
    Rear
    Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)
  • Buckets
    Bucket Capacities
    1.9-5.0 m3 (2.5-6.5 yd3)
  • Cab
    FOPS
    ISO 3449:2005 LEVEL II
    ROPS
    ISO 3471:2008
  • Dimensions with Bucket - High Lift
    Articulation Angle
    40 °
    Carry Height - Bucket Pin
    2.08 ft
    Clearance - Bucket at 45°*
    11.25 ft
    Clearance - Level Bucket**
    13.67 ft
    Clearance - Load over Height**
    11.58 ft
    Departure Angle
    33 °
    Dig Depth**
    5.3 in
    Dump Angle at Full Lift
    48 °
    Height - Bucket Pin**
    14.75 ft
    Height - Ground Clearance**
    1.33 ft
    Height - Ground to Axle Center**
    2.25 ft
    Height - Ground to Beacon**
    12.17 ft
    Height - Ground to Cab**
    10.92 ft
    Height - Overall**
    18.83 ft
    Length - Hitch to Front Axle
    4.92 ft
    Length - Overall*
    27.3 ft
    Length - Rear Axle to Bumper
    6.5 ft
    Length - Wheel Base
    9.83 ft
    Note (1)
    *Vary with bucket.
    Note (2)
    **Vary with tire.
    Note (3)
    Dimensions listed are for a machine configured with 2.1 m³ (2.7 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.
    Operating Weight
    31633 lb
    Rack Angle at Carry
    49 °
    Rack Angle at Full Lift
    53 °
    Reach - Bucket at 45°*
    4.58 ft
    Turning Radius - Inside of Tires
    9.33 ft
    Turning Radius - Outside of Tires
    17.75 ft
    Turning Radius - Over Bucket
    20.75 ft
    Width - Bucket
    8.33 ft
    Width - Over Tires
    8.33 ft
    Width - Tread Center
    6.33 ft
  • Dimensions with Bucket - Standard Lift
    Articulation Angle
    40 °
    Carry Height - Bucket Pin
    1.25 ft
    Clearance - Bucket at 45°*
    9.25 ft
    Clearance - Level Bucket**
    11.75 ft
    Clearance - Load over Height**
    10.9 ft
    Departure Angle
    33 °
    Dig Depth**
    3.9 in
    Dump Angle at Full Lift
    49 °
    Height - Bucket Pin**
    12.83 ft
    Height - Ground Clearance**
    1.33 ft
    Height - Ground to Axle Center**
    2.25 ft
    Height - Ground to Beacon**
    12.17 ft
    Height - Ground to Cab**
    10.92 ft
    Height - Overall**
    16.9 ft
    Length - Hitch to Front Axle
    4.92 ft
    Length - Overall*
    24.67 ft
    Length - Rear Axle to Bumper
    6.5 ft
    Length - Wheel Base
    9.83 ft
    Note (1)
    *Vary with bucket.
    Note (2)
    **Vary with tire.
    Note (3)
    Dimensions listed are for a machine configured with 2.1 m³ (2.7 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.
    Operating Weight
    31124 lb
    Rack Angle at Carry
    43 °
    Rack Angle at Full Lift
    54 °
    Reach - Bucket at 45°*
    3.5 ft
    Turning Radius - Inside of Tires
    9.33 ft
    Turning Radius - Outside of Tires
    17.75 ft
    Turning Radius - Over Bucket
    19.5 ft
    Width - Bucket
    8.33 ft
    Width - Over Tires
    8.33 ft
    Width - Tread Center
    6.33 ft
  • Engine
    Bore
    4 in
    Displacement
    427 in³
    Engine Model
    Cat C7.1*
    Maximum Gross Torque - Engine Speed
    1400 r/min
    Maximum Gross Torque - ISO 14396
    601 ft·lbf
    Maximum Gross Torque - SAE J1995
    608 ft·lbf
    Maximum Net Torque - ISO 9249
    595 ft·lbf
    Maximum Net Torque - SAE J1349
    593 ft·lbf
    Note
    *Meets U.S EPA Tier 4 Final, EU Stage V off-highway, and Japan 2014 emission standards.
    Note (1)
    Advertised power is tested per the specified standard in effect at the time of manufacture
    Note (2)
    Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    Note (3)
    No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Performance Mode
    Automatic
    Rated Engine Power - ISO 14396
    168 hp
    Rated Engine Power - ISO 14396 (DIN)
    170 mhp
    Rated Gross Power - Rated Engine Speed
    1800 r/min
    Rated Gross Power - SAE J1995
    170 hp
    Rated Gross Power - SAE J1995 (DIN)
    172 mhp
    Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed
    167 mhp
    Rated Net Power - ISO 9249 at Minimum Fan Speed
    165 hp
    Rated Net Power - SAE J1349 at Minimum Fan Speed
    165 hp
    Stroke
    5 in
  • Loader Hydraulic System
    Hydraulic Cycle Time - Dump (at Maximum Lift Height)
    1.5 s
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
    2.7 s
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
    5.1 s
    Hydraulic Cycle Time - Total Cycle Time
    9.3 s
    Lift Cylinder: Standard Lift Linkage - Bore Diameter
    4.7 in
    Lift Cylinder: Standard Lift Linkage - Rod Diameter
    2.6 in
    Lift Cylinder: Standard Lift Linkage - Stroke
    28.7 in
    Maximum Flow - Implement Pump
    50 gpm
    Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
    50 gpm
    Maximum Flow - Implement Pump - 4th Function Maximum Flow*
    42 gpm
    Maximum Working Pressure - Implement Pump
    3771 psi
    Note
    *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
    Relief Pressure - Tilt Cylinder
    4061 psi
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
    3771 psi
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
    4061 psi
    Tilt Cylinder: Standard Lift Linkage - Bore Diameter
    5.9 in
    Tilt Cylinder: Standard Lift Linkage - Rod Diameter
    3.5 in
    Tilt Cylinder: Standard Lift Linkage - Stroke
    21.9 in
  • Service Refill Capacities
    Cooling System
    7.9 gal (US)
    Diesel Exhaust Fluid (DEF) Tank
    5 gal (US)
    Engine Crankcase
    5.3 gal (US)
    Front Axles
    6.9 gal (US)
    Fuel Tank
    51.5 gal (US)
    Hydraulic System - Including Tank
    43.6 gal (US)
    Hydraulic Tank
    23.8 gal (US)
    Note
    DEF used in Cat systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1:2019.
    Rear Axles
    6.6 gal (US)
    Transmission - Gear Box
    2.2 gal (US)
  • Sound
    Average Exterior Sound Pressure (ISO 6395:2008)
    101 dB(A)
    Note (1)
    European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.
    Operator Sound Pressure (ISO 6396:2008)
    68 dB(A)
  • Steering
    Maximum Flow - Steering Pump
    34 gpm
    Maximum Working Pressure - Steering Pump
    3500 psi
    Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed
    2.4 s
    Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited
    2.8 s
    Steering Cylinder - Bore Diameter
    2.8 in
    Steering Cylinder - Rod Diameter
    1.6 in
    Steering Cylinder - Stroke
    17.2 in
  • Sustainability
    Recyclability
    95%
  • Tires
    Note (1)
    Other tire choices are available. Contact your Cat dealer for details.
    Note (2)
    In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
    Note (3)
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Other Choices Include
    20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture
    Standard Size
    20.5 R25, radial (L-3)
  • Transmission
    Forward and Reverse - Range 1*
    1-13 km/h (0.6-8 mph)
    Forward and Reverse - Range 2
    8 mile/h
    Forward and Reverse - Range 3
    17 mile/h
    Forward and Reverse - Range 4
    25 mile/h
    Note
    *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
  • Weights
    Operating Weight
    31124 lb
    Operating Weight - High Lift
    31633 lb
NOTE: Not all features are available in all regions.
OPERATOR ENVIRONMENT
  • 75 mm (3 in) retractable seatbelt
  • Automatic temperature control
  • Cab, enclosed ROPS/FOPS pressurized and sound suppressed
  • Push to Start
  • 8 Inch Touch Screen
  • Jog Dial with screen control
  • Programmable Joystick
  • Cup holders
  • External mirrors with lower parabolic
  • Ground level cab door release
  • Hydraulic control lockout
  • Interior cab lighting, door
  • Lunch box storage
  • Operator Not Present system
  • Radio ready speakers
  • Rear window defrost, electric
  • Seat mounted electronic implement controls, adjustable
  • Sliding glass on side window
  • Column mounted multi function control lights, wipers, turn signal
  • Suspension seat, fabric
  • Tilt steering wheel
  • Tinted front glass
  • Wet arm wiper/washer, 2-speed and intermittent, front
  • Wet arm wiper washer, rear
  • Mounting Provision
  • Digital hour meter, odometer and tachometer
  • Digital ground speedometer and direction indicator
  • Engine coolant temperature gauge
  • Fuel and diesel exhaust fluid levels
  • Hydraulic oil temperature gauge
POWER TRAIN
  • Cat C7.1 engine
  • Auto idle shut down feature
  • Auto Engine RPM
  • Tier 4 Final/EU Stage V compliant
  • Turbocharged and aftercooled
  • Filtered crankcase breather
  • Diesel particulate filter
  • Selective catalyst reduction
  • Dry type air cleaner
  • Coolant protection to –34 °C (–29 °F)
  • Fuel priming pump, automatic
  • Fuel water separator
  • Differential lock in front axle
  • Axle seal guards
  • Enclosed wet disc full hydraulic brakes
  • Parking brake, electric
  • Lubed for life driveshafts
  • Hydrostatic transmission with electronic control
  • Operator modes (TC, Hystat, Single Pedal and Ice)
  • Directional shift aggressiveness (fast, medium, slow)
  • Auto Wheel Torque control, adjust wheel torque
  • Creeper control, adjust ground speed
  • Single plane cooling package, wide 6 fins per inch density
  • Hydraulically driven demand cooling fan
  • Scheduled Oil Sampling (S·O·SSM) port, engine, coolant, transmission
HYDRAULICS
  • Automatic lift and bucket kickouts, adjustable in-cab
  • Bucket and fork modes, adjustable in-cab
  • Cylinder damping at kickout and mechanical end stops
  • Fine mode control (fast, medium, slow)
  • Hydraulic response setting (fast, medium, slow)
  • Hydraulic diagnostic connectors and S·O·S ports
  • Hydraulic sight gauge, visible
  • Load sensing hydraulics and steering
  • Seat mounted hydraulic joystick controls
  • Cat Payload
ELECTRICAL
  • Alternator, 115-amp, heavy duty
  • 12V power supply in cab (2)
  • Batteries, 1,000 CCA (2) 24-volt system, disconnect switch
  • Back up alarm
  • Emergency shutdown switch
  • LED rear stop and turn lights
  • Heavy duty gear reduction starter
  • Product Link™ Elite
  • Remote jump start post
  • Resettable main and critical function breakers
  • Roading lights front and rear
OTHER
  • Large-access enclosure doors with adjustable close/open force
  • Parallel lift loader linkage
  • Recovery hitch with pin
  • Remote mounted lubrication points
  • Lockable compartments
  • 1000-hour Service Intervals (after initial 500)
NOTE: Not all features are available in all regions.
OPERATOR ENVIRONMENT
  • Joystick steering – 25 mph (40 kph) capable
  • Radio packages
  • Telescoping Steering Column
  • Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
  • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
  • Rear Object Detection
  • Multi View Camera
  • Front View Camera, roof mounted
  • Heated external Mirrors (2)
  • Electrically adjustable and heated external mirrors (2)
  • Internal Mirrors (2)
  • Sunscreen, front and rear
  • Windshield Washing Platform
  • Powered precleaned for cab air
  • Cab guarding
POWER TRAIN
  • Differential, limited slip, rear
  • Powertrain Guarding
  • Tire Pressure Monitoring (TPM)
  • Range of Tire Options
  • Fenders (extended cover and full coverage)
HYDRAULICS
  • Auxiliary flow, third and fourth function
  • Connect Under Pressure Disconnects
  • Ride Control System, adjustable via display
  • Autolube, integrated in display
  • Biodegradable Oil
  • Debris packages (low, medium, high)
ELECTRICAL
  • Cold start package
  • Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
  • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
  • Beacon light, strobe
  • Light Guarding
OTHER OPTIONAL EQUIPMENT
  • Linkage, high lift
  • Coupler, (Fusion and ISO 23727:2009)
  • Heavy Counterweight
  • Aggregate Counterweight
  • Cat Payload Printer
  • Cylinder Guarding
  • Range of Work Tool Attachments

Download Resources

Site Map Legal Terms Privacy Policy Your Privacy Choices California Collection Notice Cookie Policy
Copyright © 2026 Fabick Cat | All Rights Reserved.

Fabick Cat & Fabick Cat Rentals are not affiliated with Fabick, Inc. Click here for more information.