New CAT Equipment

914 Small Wheel Loader

Configured for Success

The Cat® 914 Small Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Get a Quote

Benefits

10% Power Boost

Big Options Compact Loader

9% More Capacity*

*914 Aggregate Handler only.

Learn more about the 914 Small Wheel Loader

Watch

  • Axles
    Front
    Fixed; Locking differential (standard)
    Rear
    Oscillating ±11 degrees; Locking differential (Standard)
  • Buckets
    Bucket Capacities
    1.3-3.5 m3 (1.7-4.6 yd3)
    Bucket Capacities - General Purpose
    1.3-1.9 m³ (1.7-2.5 yd³)
    Bucket Capacities - Light Material
    2.5-3.5 m³ (3.3-4.6 yd³)
  • Cab
    FOPS
    ISO 3449:2005
    Note (1)
    Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    Note (2)
    The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
    Note (3)
    The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
    Note (4)
    *The measurements were conducted with the cab doors and windows closed.
    ROPS
    ISO 3471:2008
  • Engine
    Bore
    3.85 in
    Displacement
    220 in³
    Emissions
    Engine meets Tier 4 Final/Stage V emission standards.
    Engine Model
    Cat C3.6
    Maximum Gross Power
    110 hp
    Maximum Gross Power - ISO 14396
    110 hp
    Maximum Gross Power - ISO 14396 (metric)
    112 hp
    Maximum Gross Power - Rated Engine Speed
    1800 r/min
    Maximum Gross Torque - ISO 14396
    332 ft·lbf
    Maximum Gross Torque - SAE J1995
    335 ft·lbf
    Maximum Net Torque - ISO 9249
    327 ft·lbf
    Maximum Net Torque - SAE J1349
    329 ft·lbf
    Note
    Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
    Rated Net Power - ISO 9249
    98 hp
    Rated Net Power - Rated Engine Speed
    2200 r/min
    Rated Net Power - SAE J1349
    99 hp
    Stroke
    4.72 in
  • Loader Hydraulic System
    Hydraulic Cycle Time - Dump, at Maximum Reach
    1.4 s
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
    3.7 s
    Hydraulic Cycle Time - Rackback
    2.2 s
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
    5.2 s
    Hydraulic Cycle Time - Total Cycle Time
    12.5 s
    Maximum Flow - Implement Pump
    39 gpm
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
    32 gpm
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
    24 gpm
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow
    24 gpm
    Maximum Working Pressure - Implement Pump
    4061 psi
    Relief Pressure - Tilt Cylinder
    4931 psi
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
    3046 psi
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
    3046 psi
  • Service Refill Capacities
    Axles - Front Center Differential
    2 gal (US)
    Axles - Rear Center Differential
    2 gal (US)
    Cooling System
    5.7 gal (US)
    Diesel Exhaust Fluid (DEF) Tank
    4.8 gal (US)
    Engine Crankcase
    2.6 gal (US)
    Fuel Tank
    43.6 gal (US)
    Hydraulic System - Including Tank
    25.9 gal (US)
    Hydraulic Tank
    14.5 gal (US)
    Note
    DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Transmission
    0.8 gal (US)
  • Steering
    Maximum Flow - Steering Pump
    22 gpm
    Maximum Working Pressure - Steering Pump
    3263 psi
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
    3.75 turns
    Steering Articulation Angle - Each Direction
    40 °
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
    2.8 s
  • Sustainability
    Recyclability
    95%
  • Tires
    Note (1)
    Other tire choices are available. Contact your Cat dealer for details.
    Note (2)
    In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
    Note (3)
    Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Other Choices Include
    17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
    Standard Size
    17.5 R25 L2 XTLA
  • Transmission
    Forward and Reverse - Speed Range 1*
    6.3 mile/h
    Forward and Reverse - Speed Range 2*
    12.5 mile/h
    Forward and Reverse - Speed Range 3
    25 mile/h
    Note
    *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
  • Weights
    Operating Weight
    19103 lb

Download Resources

Site Map Legal Terms Privacy Policy Your Privacy Choices California Collection Notice Cookie Policy
Copyright © 2026 Fabick Cat | All Rights Reserved.

Fabick Cat & Fabick Cat Rentals are not affiliated with Fabick, Inc. Click here for more information.