New CAT Equipment

914 Compact Wheel Loader

The Cat® 914 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Get a Quote

Learn more about the 914 Compact Wheel Loader

Watch

Product Specs

Engine

Maximum Gross Power 110 HP
Maximum Net Torque - ISO 9249 327 ft·lbf
Engine Model Cat C3.6
Maximum Gross Torque - ISO 14396 332 ft·lbf
Maximum Gross Power - ISO 14396 (DIN) 111 HP
Rated Net Power - ISO 9249 98 HP
Maximum Gross Power - Maximum Engine Speed 2350 r/min
Maximum Net Torque - SAE J1349 329 ft·lbf
Emissions Engine meets Tier 4 Final/Stage V emission standards.
Rated Net Power - SAE J1349 99 HP
Maximum Gross Power - ISO 14396 110 HP
Maximum Gross Power - SAE J1995 111 HP
Bore 3.86 in
Rated Net Power - ISO 9249 (DIN) 99 HP
Rated Net Power - Rated Engine Speed 2200 r/min
Stroke 4.72 in
Displacement 220 in³
Maximum Gross Torque - SAE J1995 335 ft·lbf
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Weights

Operating Weight 19103 lb

Buckets

Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)
Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³)

Steering

Maximum Flow - Steering Pump 22 gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s
Maximum Working Pressure - Steering Pump 3263 psi
Steering Articulation Angle - Each Direction 40 °

Loader Hydraulic System

Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi
Maximum Flow - Implement Pump 39 gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24 gal/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi
Hydraulic Cycle Time - Total Cycle Time 12.5 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min
Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s
Relief Pressure - Tilt Cylinder 4931 psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32 gal/min
Maximum Working Pressure - Implement Pump 4061 psi
Hydraulic Cycle Time - Rackback 2.2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s

Service Refill Capacities

Cooling System 5.7 gal (US)
Fuel Tank 43.6 gal (US)
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential 2 gal (US)
Hydraulic System - Including Tank 25.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US)
Engine Crankcase 2.6 gal (US)
Hydraulic Tank 14.5 gal (US)
Transmission 0.8 gal (US)
Axles - Front Center Differential 2 gal (US)

Transmission

Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3 25 mile/h
Forward and Reverse - Speed Range 1* 6.3 mile/h
Forward and Reverse - Speed Range 2* 12.5 mile/h

Tires

Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Standard Size 17.5 R25 L2 XTLA
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Cab

ROPS ISO 3471:2008
FOPS EN ISO 3449:2008 (ISO 3449:2005)
Note (4) *The measurements were conducted with the cab doors and windows closed.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Axles

Rear Oscillating ±11 degrees; Locking differential (Standard)
Front Fixed; Locking differential (standard)