New CAT Equipment

854 Wheel Dozer

Engineered for demanding work in large dozing applications, the Cat® 854 Wheel Dozer is the largest in the Cat lineup and is an ideal match for large mining operations, power-generating utilities, the general contracting industry and wherever mobility, versatility and compaction are needed. Like all Cat Wheel Dozers, the 854 is designed with durability built in, ensuring maximum availability through multiple lifecycles. With optimized performance and simplified serviceability, the 854 will allow you to move more material efficiently and safely at a lower cost per ton.

Get a Quote

    Learn more about the 854 Wheel Dozer


    Product Specs


    Engine Model Cat C32B
    Gross Power 907 HP
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 900 HP
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 814 HP
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 907 HP
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 823 HP
    Rated Speed 1750 r/min
    Bore 5.7 in
    Stroke 6.4 in
    Displacement 1958 in²
    Peak Torque - 1,200 rpm 3139 lb/ft
    Torque Rise 30 %
    Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
    Note (2) Net torque rise meets SAE J139.
    Note (3) No engine derating required up to 3050 m (10,000 ft) altitude.


    Operating Weight 224647 lb


    Transmission Type Cat Planetary Power Shift
    Converter Drive - Forward 1 4.4 mile/h
    Converter Drive - Forward 2 7.7 mile/h
    Converter Drive - Forward 3 13.2 mile/h
    Converter Drive - Reverse 1 4.8 mile/h
    Converter Drive - Reverse 2 8.4 mile/h
    Converter Drive - Reverse 3 14.6 mile/h
    Direct Drive - Forward 1 Lock-up disabled
    Direct Drive - Forward 2 8.1 mile/h
    Direct Drive - Forward 3 14.2 mile/h
    Direct Drive - Reverse 1 5 mile/h
    Direct Drive - Reverse 2 8.9 mile/h
    Direct Drive - Reverse 3 15.6 mile/h
    Note Travel speeds based on 45/65-45 L-5 46 ply tires.

    Hydraulic System - Lift/Tilt

    Output at 1,850 rpm and 6900 kPa (1,000 psi) 161 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke 177 mm × 1760 mm (0.58 ft × 5.8 ft)
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke 267 mm × 286 mm (0.88 ft × 0.94 ft)

    Service Refill Capacities

    Fuel Tank - Standard 413 gal (US)
    Cooling System 53 gal (US)
    Crankcase 32 gal (US)
    Transmission 45 gal (US)
    Differential - Final Drives - Front 98 gal (US)
    Differential - Final Drives - Rear 90 gal (US)
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only 77 gal (US)
    Note (1) - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfer or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214. Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. For further fluid specifications and guidelines, visit:


    Front Fixed
    Rear Trunnion


    Brakes Meets ISO 3540:2011


    Blade Capacities 30.5 to 44.8 m3 (40 to 58.6 yd3)

    Dimensions (Approximate)

    Height - Top of ROPS 18.25 ft
    Height - Top of Exhaust Pipe 17.17 ft
    Height - Top of Hood 13 ft
    Ground Clearance 27 in
    Centerline of Front Axle to Hitch 9.67 ft
    Centerline of Rear Axle to Edge of Bumper 13.75 ft
    Wheel Base 19.25 ft
    Length - With Blade on Ground 44 ft

    Hydraulic System - Steering

    Steering System - Pump Piston, variable displacement
    Minimum Turning Radius - Over Blade 31 ft
    Steering System - Circuit Pilot, load sensing
    Total Steering Angle 86 degrees
    Relief Valve Setting 5004 psi

    Operating Specifications

    Operating Weight 224647 lb

    Sound Performance Levels

    Sound Performance • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

    Air Conditioning System

    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.


    ROPS/FOPS ISO 3471:2008 and ISO 3449:2005 Level II Standards