New CAT Equipment

836 Landfill Compactor

Do More with Less

The Cat® 836 Landfill Compactor is designed with heavy-duty main structures that support multiple life cycles, features a Cat C18 engine, single-lever steering, pressurized cab, and wheel/tip options that help provide extended service life. Available Cat Compact Technologies further enhance compaction performance and consistency by providing accurate compaction values and 3D mapping.

Get a Quote

Benefits

IMPROVED PERFORMANCE

Improved operation with smoother directional shifts due to Cat locker differentials

ENHANCED TECHNOLOGY

Boost your productivity with standard technologies like Cat Compact with Pass Mapping and optional Cat Compact with Elevation Mapping

IMPROVED GUARDING

New features such as additional axle Duo-cone® seal guards, eyebrow guards, and new reversing fan guard help protect the machine from trash intake andother onsite hazards

Learn more about the 836 Landfill Compactor

Watch

  • Air Conditioning System
    Air Conditioning
    • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system contains 1.4 kg (3.1 lb) of refrigerant which has a CO2 equivalent of 2.002 metric tonnes (2.206 tons).
  • Axles
    Front
    Planetary – Fixed
    Oscillation Angle
    ±6°
    Rear
    Planetary – Oscillating
  • Braking System
    Parking Brake
    Spring Applied, Hydraulic Released
    Service Brakes
    Multi Disc Wet (Enclosed) 2 WHL
  • Dimensions (Approximate)
    Centerline of Rear Axle to Rear Compactor Guard
    11.3 ft
    Ground Clearance to Bottom of Bumper
    3.2 ft
    Ground Clearance to Hitch
    2.1 ft
    Ground Clearance to Transmission Guard
    2.1 ft
    Height - Cab Roof
    14.1 ft
    Height - Top of Exhaust Pipe
    15.1 ft
    Height - Top of Hood
    11.3 ft
    Height to Top of Air Conditioning Condenser
    15.2 ft
    Height to Top of Beacon
    15.2 ft
    Hitch to Centerline of Front Axle
    7.5 ft
    Overall Machine Length with Semi U-Blade
    35.8 ft
    Wheel Base
    14.9 ft
    Width over Drums
    14 ft
    Width over Front Striker Bars
    12.9 ft
    Width over Platform
    10.5 ft
    Width over Rear Striker Bars
    12.9 ft
  • Engine
    Bore
    5.71 in
    Displacement
    1104.5 in³
    Emissions
    U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 or Brazil MAR-1, equivalent to China Nonroad Stage III/U.S. EPA Tier 3/ EU Stage IIIA
    Engine Model
    C18
    Engine Power - ISO 14396:2002
    553 hp
    Gross Power - SAE J1995:2014
    562 hp
    High Idle Speed
    2120 r/min
    Low Idle Speed
    750 r/min
    Maximum Altitude - Without Derating
    7500 ft
    Net Power - ISO 9249:2007
    502 hp
    Net Power - SAE J1349:2011
    496 hp
    Note
    Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
    Peak Torque ( 1,400 rpm )
    2275 lbf·ft
    Rated Speed
    1900 rpm
    Stroke
    7.2 in
    Torque Rise
    52%
  • Hydraulic System - Lift
    Cylinders, Double Acting: Lift, Bore, Stroke
    137.9 mm x 1021 mm (5.5 in x 40.2 in)
    Lift System - Circuit
    Flow Sharing Implement; Pilot Operated LS Valve w/EH
    Lift System - Pump
    Variable displacement piston
    Max Flow @ 2000 rpm
    79 gal/min
    Pilot Relief Valve Setting
    551 psi
    Pilot System
    Variable displacement piston
    Relief Valve Setting - Lift
    4206 psi
  • Hydraulic System - Steering
    Max Flow @ 2000 rpm
    79 gal/min
    Relief Valve Setting - Steering
    3495 lb/in²
    Steering Cycle Times - High Idle
    3.9 s
    Steering Cycle Times - Low Idle
    6.4 s
    Steering System - Circuit
    Flow Sharing Implement; Pilot, load sensing
    Steering System - Pump
    Piston – Variable Displacement
    Total Steering Angle
    86
  • Operating Specifications
    Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
    125622 lb
    Maximum Operating Weight (Tier 4 Final/Stage V)
    126364 lb
    Operating Weight (Tier 3/Stage IIIA equivalent)
    123321 lb
    Operating Weight (Tier 4 Final/Stage V)
    124063 lb
  • Semi U-Blade
    Capacity
    29.3 yd³
    Digging Depth
    1.2 ft
    Ground Clearance
    5.7 ft
    Height
    7.5 ft
    Height of Cutting Edge
    4.1 ft
    Overall Width
    17.4 ft
    Total Operating Weight
    124063 lb
    Turning Radius – Inside of Wheels
    11.9 ft
    Turning Radius – Outside Corner of Blade
    28.9 ft
    Weight
    7963 lb
  • Service Refill Capacities
    Cooling System - Tier 3/Stage IIIA Equivalent
    37.2 gal (US)
    Cooling Systems - Tier 4 Final/EU Stage V
    40 gal (US)
    Diesel Exhaust Fluid Tank
    9 gal (US)
    Differential - Final Drives - Front
    49 gal (US)
    Differential - Final Drives - Rear
    50 gal (US)
    Engine Crankcase
    16 gal (US)
    Fuel Tank
    209 gal (US)
    Hydraulic System - Implement/Steering
    46.2 gal (US)
    Hydraulic Tank Only
    27.2 gal (US)
    Note
    - All nonroad Tier 4 Final/Stage V diesel engines are required to use: - Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) for EPA and 10 ppm (mg/kg) for EU sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specificiations. - Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. - Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
    Transmission
    21.9 gal (US)
  • Sound Performance - Tier 3 / Stage IIIA
    Machine Sound Level (ISO 6395:2008) - Standard
    112 dB(A)
    Machine Sound Level (ISO 6395:2008) - Suppression
    110 dB(A)
    Note (1)
    The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
    Note (2)
    Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3)
    The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
    Operator Sound Level (ISO 6396:2008) - Standard
    72 dB(A)
    Operator Sound Level (ISO 6396:2008) - Suppression
    72 dB(A)
  • Sound Performance - Tier 4 Final/EU Stage V
    Machine Sound Level (ISO 6395:2008) - Standard
    111 dB(A)
    Machine Sound Level (ISO 6395:2008) - Suppression
    109 dB(A)
    Note (1)
    The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
    Note (2)
    Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3)
    The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
    Operator Sound Level (ISO 6396:2008) - Standard
    72 dB(A)
    Operator Sound Level (ISO 6396:2008) - Suppression
    72 dB(A)
  • Straight Blade
    Capacity
    25.9 yd³
    Digging Depth
    1.2 ft
    Ground Clearance
    5.7 ft
    Height
    7.4 ft
    Height of Cutting Edge
    3.7 ft
    Overall Width
    17 ft
    Total Operating Weight
    123000 lb
    Turning Radius - Inside of Wheels
    11.9 ft
    Turning Radius – Outside Corner of Blade
    28.7 ft
    Weight
    6894 lb
  • Transmission
    Direct Drive - Forward 1
    4.3 mile/h
    Direct Drive - Forward 2
    7.8 mile/h
    Direct Drive - Reverse 1
    4.6 mile/h
    Direct Drive - Reverse 2
    8.2 mile/h
    Transmission Type
    Planetary - Powershift - ECPC
  • U-Blade
    Capacity
    33.6 yd³
    Digging Depth
    3.1 ft
    Ground Clearance
    3.9 ft
    Height
    7.2 ft
    Height of Cutting Edge
    4.1 ft
    Overall Width
    17.4 ft
    Total Operating Weight
    123785 lb
    Turning Radius – Inside of Wheels
    11.9 ft
    Turning Radius – Outside Corner of Blade
    28.8 ft
    Weight
    7696 lb
  • Wheels
    Chopper Tips (Weight Group)
    28404 lb
    Combination Tips (Weight Group)
    28250 lb
    Diamond Tips Weight (Group)
    32659 lb
    Drum Diameter
    69.7 in
    Drum Width
    55.1 in
    Feet Per Row
    8
    Feet Per Wheel
    40
    Outside Diameter
    83.8 in
    Outside Diameter - Diamond
    84.3 in
    Paddle Tips - Weight (Group)
    272227 lb
    Plus Tips - Weight (Group)
    29784 lb
    Replaceable
    Weld on
    Tip Height
    179 mm
    Tip Height - Diamond
    7.25 in
    Width Over Drums
    4280 mm
NOTE
  • Standard and optional equipment may vary. Consult your Cat dealer for details.
POWER TRAIN
  • Advanced Productivity Electronic Control Shifting (APECS)
  • Air to air aftercooler
  • Brakes, fully hydraulic, enclosed, wet multiple disc brakes
  • Cat Clean Emission Module, insulated (Tier 4 Final/Stage V/Korea Stage V and Japan 2014)
  • Electro hydraulic parking brake
  • Engine, Cat C18: – Tier 4 Final/Stage V/Korea Stage V and Japan 2014 – Tier 3/Stage IIIA equivalent
  • Fuel priming pump, electric
  • Fuel to air cooler
  • Ground level engine shutoff
  • Guard (3 piece) transmission
  • Heat shield, turbo and exhaust manifold
  • Hydraulically driven demand fan
  • Integrated braking
  • Radiator, Aluminum Modular Radiator (AMR)
  • Separated cooling system
  • Starting aid (ether) automatic
  • Throttle lock
  • Torque converter with lockup clutch (LUC)
  • Turbine precleaner, engine air intake
  • Transmission, planetary, with 2F/2R speed range control
  • Underhood ventilation system
ELECTRICAL
  • Alarm, back-up
  • Alternator, 150 amp
  • Batteries, maintenance-free (4-1,000 CCA)
  • Converter, 10-15 amp, 24V to 12V
  • Lighting system, halogen (front and rear)
  • Lighting, access stairway
  • Starter, electric (heavy duty)
  • Starter lockout (ground level)
  • Starting receptacle for emergency start
  • Transmission lockout (ground level)
OPERATOR ENVIRONMENT
  • Air conditioner w/roof-mounted condenser
  • Cab, sound-suppressed and pressurized
  • Internal four-post rollover protective structure (ROPS/FOPS)
  • Radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp) 12V power port for mobile phone or laptop connection
  • Camera, rear vision
  • Coat and hard hat hooks
  • Flip-up armrest
  • Heater and defroster
  • Horn, electric
  • Hydraulic controls (floor mounted)
  • Implement hydraulic lockout
  • Laminated glass
  • Light, (dome) cab
  • Lunchbox and beverage holders
  • Instrumentation, Gauges: – DEF fluid level (Tier 4 Final/Stage IV) – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
  • Instrumentation, Warning Indicators: – Action alert system, three category – Axle/brake oil temp, front – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp
  • Mirrors, rearview (externally mounted)
  • Parking brake status
  • Radio, CB (ready)
  • Seat, Cat Comfort, (cloth) air suspension
  • Seat belt, retractable, 76 mm (3") wide
  • STIC Control System with steering lock
  • Sun visor, front
  • Glass (window) - rubber mounted glass
  • Transmission gear (indicator)
  • Vital Information Management System (VIMS) with graphical information display: external data port, customizable operator profiles
  • Wet-arm wipers/washers (front and rear)
  • Intermittent wipers (front and rear)
WHEELS
  • Wheels, paddle, plus, combination, and diamond wheel configurations
GUARDS
  • Guards, axle (front and rear)
  • Guards, cab window
  • Guards, crankcase and power train, hydraulically powered
  • Guards, rear fan and grill
BLADES
  • Bulldozer arrangement is included in the standard equipment. Bulldozer blades are optional.
FLUIDS
  • Antifreeze, premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
OTHER STANDARD EQUIPMENT
  • Auto Blade Positioner (ABP)
  • Demand fan/swing out (hydraulic reversible)
  • Doors, service access locking
  • Ecology drains for engine, radiator, hydraulic tank
  • Electronic clutch pressure control and remote mounted pressure taps
  • Emergency platform egress
  • Engine, crankcase, 500 hour interval with CJ-4 oil
  • Fuel tank, 793 L (210 gal)
  • Hitch, drawbar with pin
  • Hoses, Cat XT™
  • Hydraulic oil cooler
  • Hydraulic, steering and brake filtration/screening system
  • Oil sampling valves
  • Product Link™ - Cellular
  • Stairways, fixed-L/R (rear access)
  • Steering, load sensing
  • Vandalism protection caplocks
  • Venturi stack
NOTE
  • Standard and optional equipment may vary. Consult your Cat dealer for details.
Various blades:
  • Straight blade
  • U-blade
  • Semi U-blade
Various tip and wheel arrangements:
  • Paddle
  • Plus
  • Diamond

Download Resources

Site Map Legal Terms Privacy Policy Your Privacy Choices California Collection Notice Cookie Policy
Copyright © 2025 Fabick Cat | All Rights Reserved.

Fabick Cat & Fabick Rents – The Cat Rental Store are not affiliated with Fabick, Inc. Click here for more information.