New CAT Equipment

772 (07) Off-Highway Truck

Maximize productivity with accessible service access

In 1963, Caterpillar introduced the 769, a revolutionary off-road truck that was purpose built for the rigors of mining and heavy construction. Fifty years later, our trucks have never been better. We've taken the best of our rugged, dependable heritage and combined it with technologies that help our environment, make your operators more productive and dramatically improve the economics of your haul fleet. This 772 has an updated traction control system to keep you moving when the ground conditions aren't perfect, you'll see improvements in fuel use through new and flexible fuel saving strategies, and we're making the operating experience best in class with automotive quality shifting, noise reduction and cab updates. Our heritage and new use of technology are combined in this truck for one purpose - the continued success of your business.

Get a Quote

    Fabick Cat needs this information to contact you about our products and services. You may unsubscribe from communications at any time. For more information, please review our Privacy Policy.

    Benefits

    Up to 10% Fuel Savings

    Choosing between two economy mode options allows for maximum savings without loss of productivity.

    More Traction on Slopes

    Traction control system assists in preventing tire slippage, loss of traction, and stability.



     

    Integrated Technologies

    Cat payload technology calculates load capacity for optimal payloads resulting in a lower cost per ton.

    Learn more about the 772 (07) Off-Highway Truck

    Watch

    • Body Hoists
      Body Lower Time - Float
      10 s
      Body Power Down - High Idle
      10 s
      Body Raise Time - High Idle
      8 s
      Pump Flow - High Idle
      112 gal/min
      Relief Valve Setting - Lower
      500 psi
      Relief Valve Setting - Raise
      2750 psi
    • Brakes
      Brake Standards
      ISO 3450:1996
      Brake Surface - Front
      216 in²
      Brake Surface - Rear
      7794 in²
    • Capacity - Dual Slope - 100% Fill Factor
      Heaped 2:1 (SAE)
      40.8 yd³
      Struck
      31.3 yd³
    • Capacity - Flat Floor - 100% Fill Factor
      Heaped 2:1 (SAE)
      40.9 yd³
      Struck
      31.3 yd³
    • Dimensions
      Centerline Front Tire Width
      10.4 ft
      Centerline of Rear Dual Tire Width
      8.7 ft
      Dump Clearance
      1.5 ft
      Engine Guard Clearance
      2 ft
      Front Canopy Height
      13.7 ft
      Ground Clearance
      1.6 in
      Height - Top of ROPS
      12.8 ft
      Inside Body Depth - Maximum
      5.7 ft
      Inside Body Length
      19 ft
      Inside Body Width
      11.9 ft
      Loading Height - Empty
      11.6 ft
      Operating Width
      15.7 ft
      Outside Body Width
      12.9 ft
      Overall Body Length
      26.8 ft
      Overall Height - Body Raised
      27.1 ft
      Overall Length
      28.9 ft
      Overall Tire Width
      12.9 ft
      Rear Axle - Clearance
      1.9 ft
      Rear Axle - Tail
      9.5 ft
      Wheel Base
      13 ft
    • Engine
      Bore
      5.7 in
      Displacement
      1105 in³
      Engine Model
      Cat® C18
      Engine Power - ISO 14396
      598 HP
      Gross Power - SAE J1995
      605 HP
      Net Power - ISO 9249
      550 HP
      Net Power - SAE J1349
      550 HP
      Net Torque - SAE J1349
      2221 ft-lb
      Number of Cylinders
      6
      Rated Engine Speed
      1700 r/min
      Stroke
      7.2 in
    • Final Drives
      Differential Ratio
      2.74:1
      Planetary Ratio
      4.80:1
      Total Reduction Ratio
      13.14:1
    • Operating Specifications
      Body Capacity (SAE 2:1)**
      40.8 yd³
      Body Capacity - SAE 2:1
      40.8 yd³
      Maximum Payload Class (110%)
      56.7 ton (US)
      Nominal Payload Class (100%)
      51.6 ton (US)
      Not to Exceed Payload (120%)
      61.9 ton (US)
      Target Payload Capacity
      51.6 ton (US)
      Top Speed - Loaded
      49.2 mile/h
    • ROPS
      FOPS Standards
      FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria.
      ROPS Standards
      ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
    • Service Refill Capacities
      Brake Hoist System
      60 gal (US)
      Brake/Hoist Hydraulic Tank
      38 gal (US)
      Cooling System
      33 gal (US)
      Crankcase
      17 gal (US)
      DEF Tank
      6 gal (US)
      Differential - Final Drives
      47 gal (US)
      Fuel Tank
      140 gal (US)
      Steering System - Including Tank
      23 gal (US)
      Steering Tank
      14.5 gal (US)
      Torque Converter - Transmission System
      17 gal (US)
    • Sound
      Sound Standards (1)
      Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
      Sound Standards (2)
      Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A).
      Sound Standards (3)
      Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
    • Steering
      Steer Angle
      40.5 °
      Steering Standards
      ISO 5010:2007
      Turning Circle - Clearance Diameter
      66.6 ft
      Turning Diameter - Front
      57.7 ft
    • Suspension
      Empty Loaded Cylinder Stroke Front
      9.2 in
      Empty Loaded Cylinder Stroke Rear
      5.8 in
      Rear axle - Oscillation
      8.9 °
    • Tires
      Standard Tire
      21.00R33 (E4)
    • Transmission
      Forward - 1
      8 mile/h
      Forward - 2
      10.9 mile/h
      Forward - 3
      14.8 mile/h
      Forward - 4
      19.8 mile/h
      Forward - 5
      26.9 mile/h
      Forward - 6
      36.2 mile/h
      Forward - 7
      49.2 mile/h
      Reverse
      10.4 mile/h
    • Weight Distributions - Approximate
      Front Axle - Empty
      51.4 %
      Front Axle - Loaded
      34.2 %
      Rear Axle - Empty
      48.6 %
      Rear Axle - Loaded
      65.8 %
    • Weights - Approximate
      Body Weight
      17306 lb
      Chassis Weight
      59223 lb
      Target Gross Machine Operating Weight
      181000 lb
      Target Gross Machine Weight
      181000 lb
    NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
    ELECTRICAL
    • Alarm, backup
    • Alternator, 115 ampere
    • Auxiliary jump start receptacle
    • Batteries, maintenance-free, 12V (2), 190 amp-hour
    • Electrical system, 24V
    • Lighting system: - Backup light (halogen) - Directional signals/hazard warning (front and rear LED) - Headlights, (halogen) with dimmer - Operator access courtesy lights (Developing Market Only)
    PRODUCT LINK COMMUNICATIONS
    • Product Link Ready
    GUARDS
    • Driveline
    • Engine crankcase
    OPERATOR ENVIRONMENT
    • Air conditioning
    • Ashtray and cigarette lighter
    • Coat hook
    • Cup holders (4)
    • Diagnostic connection port, 24V
    • Entertainment Radio Ready: - 5 amp converter - Speakers - Antenna - Wiring harness
    • Gauges/indicators: - Air cleaner service indicator - electronic - Brake oil temperature gauge - Coolant temperature gauge - Hour meter - Tachometer - Engine overspeed indicator - Fuel level - Speedometer with odometer - Transmission gear indicator
    • Heater/defroster (11 070 kCal/43,930 BTU)
    • Hoist lever
    • Horn, electric
    • Light - dome
    • Light - courtesy
    • Messenger, display unit
    • Mirrors
    • Power port, 12V
    • ROPS cab, insulated/sound suppressed
    • Seat, Cat Comfort Series III: - full air suspension - four point harness
    • Steering wheel, padded, tilt and telescopic
    • Storage compartment
    • Sun visor, tinted glass
    • Throttle lock
    • Windshield wiper (intermittent) and washer
    POWER TRAIN
    • Air-To-Air Aftercooler (ATAAC)
    • Air cleaner with precleaner (1)
    • Automatic cold mode idle control
    • Electric start
    • Turbocharger
    • Braking system, hydraulic actuated: - Automatic Retarder Control (ARC) (utilizes rear oil-cooled, multiple disc brakes) - Brake release motor (towing) - Caliper-disc (front) - Oil-cooled, multiple disc (rear) - Parking - Secondary - Service
    • Transmission: - 7 speed automatic powershift - Body up shift inhibitor - Controlled throttle shifting - Directional shift management - Downshift inhibitor - Neutral start switch - Neutral coast inhibitor - Reverse shift inhibitor - Reverse neutralizer during dumping - Programmable top gear selection
    SUSPENSION SYSTEMS
    • Suspension, front and rear
    OTHER STANDARD EQUIPMENT
    • Body safety pin (secures body in up position)
    • Body down indicator
    • CD ROM parts book
    • Fan, hydraulic demand
    • Fuel tank (530 L/140 gal)
    • Guard, engine compartment
    • Guard, mud
    • Ground level battery disconnect
    • Ground level engine shutdown
    • Ground level grease fittings
    • Reservoirs (separate): - Brake/converter/hoist - Steering - Transmission/torque converter
    • Rims 15 × 33
    • Rock ejectors
    • Service platform, left and right side
    • Supplemental steering (automatic)
    • Tie down eyes
    • Tow hooks (front)/Tow pin (rear)
    • Vandalism protection locks
    ANTIFREEZE
    • Extended Life Coolant to -35° C (-30° F)