Engine Model | Cat® C18 |
Bore | 5.7 in |
Stroke | 7.2 in |
Displacement | 1106 in³ |
Net Power - SAE J1349 | 496 HP |
Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final | Cat C18 |
Net Power - ISO 14396 | 504 HP |
Gross Power - SAE J1995 | 511 HP |
Peak Engine Torque Net (SAE J1349) | 1887 ft·lbf |
No Engine De-rating Required Below | 10000 ft |
Note (4) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
Peak Engine Torque Gross (SAE J1995) | 1931 ft·lbf |
Note (1) | The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
Peak Engine Torque Speed | 1200 r/min |
Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Note (3) | Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. |
Emissions | The 740 EJ meets Tier 4 Final and Stage V emission standards. |
Rated Payload | 42 ton (US) |
Heaped (SAE 2:1) | 30.1 yd³ |
Struck | 23.5 yd³ |
Forward - 1 | 3.8 mile/h |
Forward - 2 | 5 mile/h |
Forward - 3 | 7 mile/h |
Forward - 4 | 8.8 mile/h |
Forward - 5 | 11.6 mile/h |
Forward - 6 | 14.2 mile/h |
Forward - 7 | 19.6 mile/h |
Reverse - 1 | 4 mile/h |
Reverse - 2 | 9.1 mile/h |
Forward - 8 | 23.5 mile/h |
Forward - 9 | 34 mile/h |
Interior Cab | 72 dB(A) |
Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Front Axle - Empty | 44849 lb |
Front Axle - Loaded | 48548 lb |
Center Axle - Loaded | 57214 lb |
Center Axle - Empty | 17095 lb |
Total - Empty | 78623 lb |
Rear Axle - Rated Load | 40120 lb |
Rear Axle - Empty | 16515 lb |
Front Axle - Rated Load | 3534 lb |
Center Axle - Rated Load | 40120 lb |
Total - Loaded | 162399 lb |
Total - Rated Load | 83776 lb |
Rear Axle - Loaded | 56637 lb |
Type | High Strength Brinell HB450 Wear Resistant Steel |
Chute | 0.55 in |
Front | 0.28 in |
Side | 0.43 in |
Base | 0.55 in |
Fuel Tank | 145.3 gal (US) |
Cooling System | 23.7 gal (US) |
Engine Crankcase | 13.7 gal (US) |
Steering/Hoist Hydraulic System | 36.9 gal (US) |
Transmission - OTG | 19.8 gal (US) |
DEF Tank | 5.3 gal (US) |
Brake Cooling Tank | 17.7 gal (US) |
Axles - Each | 15.8 gal (US) |
Final Drive - Each | 1.3 gal (US) |
Lock to Lock | 4.8 seconds @ 60 rpm |
Brakes | ISO 3450 – 2011 |
Cab - FOPS | ISO 3449 Level II – 2005 |
Cab - ROPS | ISO 3471 – 2008 |
Steering | ISO 5010 – 2007 |
Note | Dimensions are for machines equipped with 29.5R25 tires. |
Turning Dimensions - Aisle Width | 233 in |
Turning Dimensions - Inside Radius | 173 in |
Turning Dimensions - Clearance Radius | 356 in |
Turning Dimensions - SAE Turning Radius | 339 in |
Turning Dimensions - Steer Angle - Left/Right | 45 deg |
Retract (manual) | 21 s |
Eject (manual) | 17 s |
Eject (automatic) | 16 s |
Retract (automatic) | 21 s |
Note | An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. |
Wheel Loader: 972 - Passes | 4–5 |
Wheel Loader: 982 - Passes | 4 |
Hydraulic Excavator: 374 - Passes | 5 |
Hydraulic Excavator: 390 - Passes | 4 |
Wheel Loader: 980 - Passes | 4–5 |