New CAT Equipment

415 IL Industrial Loader

More Comfort – More Performance – More Versatility

The Cat® 415 IL Industrial Loader delivers great performance, improved fuel efficiency, and a superior hydraulic system.

Get a Quote

    Fabick Cat needs this information to contact you about our products and services. You may unsubscribe from communications at any time. For more information, please review our Privacy Policy.

    • Axle Ratings
      Front Axle (4WD) - Dynamic
      13228 lb
      Front Axle (4WD) - Static
      26455 lb
      Rear Axle - Dynamic
      20233 lb
      Rear Axle - Static
      50582 lb
    • Counterweights - Front - Minimum Recommendations
      Standard Stick - GP Loader Bucket - 4WD
      255 lb
      Standard Stick - MP Loader Bucket - 4WD
      no counterweight
    • Engine
      Bore
      3.86 in
      Displacement
      220 in³
      Emissions
      Engine meets U.S. EPA Tier 4 Final emission standards.
      Engine Model
      Cat C3.6
      Gross Power - ISO 14396
      74 HP
      Gross Power - SAE J1995
      75 HP
      Net Peak Power - 2,200 rpm - ISO 9249
      69 HP
      Net Peak Power - 2,200 rpm - SAE J1349
      69 HP
      Net Peak Torque SAE J1349
      308 ft·lbf
      Net Power - 2,200 rpm - SAE J1349
      69 HP
      Net Power - SAE J1349
      69 HP
      Net Torque Rise - 1,200 rpm
      86 %
      Note
      No derating required up to 2286 m (7,500 ft).
      Rated Net Power - 2,200 rpm - ISO 9249
      69 HP
      Stroke
      4.72 in
    • Hydraulic System
      Pump Capacity at 2,200 rpm
      33 gal/min
      Pump Type
      Variable Flow, Axial Piston
      System Pressure - Hitch/Box Scraper
      2973 psi
      System Pressure - Loader
      2973 psi
      Type
      Closed Center
    • Service Refill Capacities
      Cooling System with Air Conditioning
      4.4 gal (US)
      Engine Oil - With Filter
      2.3 gal (US)
      Front Axle (4WD)
      2.9 gal (US)
      Front Axle (4WD) - Planetaries
      0.2 gal (US)
      Fuel Tank
      42 gal (US)
      Hydraulic System
      23.8 gal (US)
      Hydraulic Tank
      10.6 gal (US)
      Note
      Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur
      Rear Axle
      4.4 gal (US)
      Rear Axle - Planetaries
      0.4 gal (US)
      Transmission - Power Shuttle - 2WD
      4 gal (US)
      Transmission - Power Shuttle - 4WD
      4 gal (US)
    • Steering
      Axle Oscillation
      11°
      Bore
      2.6 in
      Power Steering
      Hydrostatic
      Rod Diameter
      1.6 in
      Stroke
      4.2 in
      Turning Circle - AWD (inner wheel not braked) - Outside, Front Wheels
      26.8 ft
      Turning Circle - AWD (inner wheel not braked) - Outside, Widest Loading Bucket
      36 ft
      Type
      Front Wheel
    • Tires
      Standard Configuration of Front/Rear Tires
      Front: 12.5 80/16.9; Rear: 16.9-24
    • Transmission
      Power Shuttle Transmission - Standard - Forward - 1st
      3.4 mile/h
      Power Shuttle Transmission - Standard - Forward - 2nd
      5.5 mile/h
      Power Shuttle Transmission - Standard - Forward - 3rd
      13 mile/h
      Power Shuttle Transmission - Standard - Forward - 4th
      23 mile/h
      Power Shuttle Transmission - Standard - Reverse - 1st
      3.4 mile/h
      Power Shuttle Transmission - Standard - Reverse - 2nd
      5.5 mile/h
      Power Shuttle Transmission - Standard - Reverse - 3rd
      13 mile/h
      Power Shuttle Transmission - Standard - Reverse - 4th
      23 mile/h
    • Weights
      Air Conditioning
      101 lb
      Cab - ROPS/FOPS
      359 lb
      Front Counterweight - Counterweights - Option 1
      255 lb
      Front Counterweight - Counterweights - Option 2
      530 lb
      Front Counterweight - Counterweights - Option 3
      1015 lb
      MP Bucket (0.96 m3/1.25 yd3) - With Fold-Over Forks
      2017 lb
      MP Bucket (0.96 m3/1.25 yd3) - Without Fold-Over Forks
      1642 lb
      Minimum Operating Weight
      14035 lb
      Note
      *Specifications shown are for machine equipped with 0.76 m³ (1.0 yd³) general purpose loader bucket, 115 kg (255 lb) front counterweight, 80 kg (176 lb) operator, all wheel drive and full fuel tank.
      Operating Weight - Maximum
      17637 lb
      Operating Weight - Maximum - ROPS Capacity
      17637 lb
      Rear Counterweight
      198 lb
    STANDARD EQUIPMENT
    • Air cleaner
    • Alarm, back-up
    • Audible system fault alarm
    • Box Blade Controls, finger lever pilot
    • Battery, maintenance-free, 880 CCA
    • Battery disconnect switch
    • Brace, lift cylinder
    • Brake, secondary parking
    • Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
    • Bucket level indicator
    • Canopy, ROPS/FOPS
    • Coat restraint
    • Coolant/antifreeze, extended life
    • Counterweight, bumper
    • Dome light (cab only)
    • Diagnostic port for engine
    • Differential lock, floor mounted
    • Differential lock, loader joystick
    • Drink holders, two
    • Engine, Cat C3.6, meets Tier 4 Final emission standards, diesel particulate filter
    • Engine enclosure, sound suppression removal panels
    • Face seals, O-ring
    • Fan, suction and guard
    • Fast reversing shuttle, all gears
    • Fenders, rear
    • Filters, spin-on: fuel, engine oil, transmission oil, water separator
    • Filters, bowl and cartridge: hydraulic fluid
    • Flashing hazards/signal lights
    • Floor mat
    • Fuel tank, fully enclosed
    • Fully hinged front grill for cooling package cleaning access
    • Gauge cluster: coolant temperature, fuel level, torque converter temperature, battery voltage
    • Ground level fuel fill
    • High ambient cooling package
    • Hitch, rear 3-point
    • Hood lock, inside cab
    • Hydraulic hose, Cat XT-3
    • Hydraulic oil cooler
    • Hydraulic oil level sight gauge
    • Hydraulic valve, hydrostatic steering
    • Hydraulic valves, loader 3 function
    • Hydraulic valves, rear 5 function
    • Hydraulics, load sensing with variable displacement piston pump
    • Indicator lights and LCD warnings for system status
    • Instrument panel lights
    • Key start/stop system
    • LCD screen with machine system information
    • Lights, working (2 front, 2 rear)
    • Loader, self-leveling, return-to-dig and transmission disconnect switch
    • Loader, single tilt
    • Mirror, rearview
    • Open circuit breather
    • Power receptacle, 12 volt, 2 internal, 2 external roof mounted
    • Power steering, hydrostatic
    • Seat belt, retractable, 75 mm (3 in)
    • Steering knob
    • Seat, mechanical suspension, fabric or vinyl cover, with armrest
    • Starting system, glow plugs
    • Steering, hydrostatic
    • Storage compartment, lockable
    • Storage tray
    • Stop and tail lights
    • Tires, 12.5/80-18 front, 16.9-24 rear
    • Toolbox, external, lockable
    • Torque converter
    • Throttle, foot, electronic
    • Transmission, four speed, syncromesh
    • Transmission neutralizer switch
    • Transport tie-downs
    • Four Wheel Drive
    • Warning horn, electric
    • Product Link, cellular, PLE643
    • Product Link, dual mode, PLE683
    OPTIONAL EQUIPMENT
    • Battery, additional, 880 CCA
    • Box, blade/scarifier
    • Cab, standard with air conditioning
    • Cold weather fuel (–30° C/–22° F)
    • Cold weather package, including additional battery, engine block heater, radiator antifreeze (–50° C/–58° F), cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
    • Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
    • Counterweight, rear 90 kg (198 lb)
    • Dual tilt rear hitch
    • Face fan
    • Fenders, front with integral steps
    • Radio and CD player, Bluetooth®
    • Ride Control
    • Rotating beacon, magnetic mount
    • Security system keypad
    • Vandalism protection, gauge cover
    • Work Tool Attachments such as buckets, forks, and material handling arms. See your Cat dealer for more information.
    • LED lights, working (2 front, 2 rear)
    • Security system, Bluetooth
    • Security System, operator display
    • Side mirrors, cab, external
    • Single Tilt Loader Coupler, Integrated Tool Carrier (IT) Interface