New CAT Equipment

232D3 Skid Steer Loader

The Cat® 232D3 Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.

Get a Quote

Learn more about the 232D3 Skid Steer Loader

Watch

Product Specs

Engine

Gross Power - SAE J1995 67.1 HP
Net Power - SAE 1349 65.8 HP
Displacement 134.3 in³
Stroke 3.9 in
Bore 3.3 in
Peak Torque - 1,500 rpm - SAE J1995 153 ft·lbf
Net Flywheel Power 65.8 HP
Net Power - ISO 9249 66.5 HP
Engine Model Cat C2.2 CRDI

Operating Specifications

Rated Operating Capacity 1900 lb
Tipping Load 3800 lb
Breakout Force - Tilt Cylinder 3928 lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Rated Operating Capacity with Optional Counterweight 2000 lb

Weights

Operating Weight 6514 lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

Dimensions

Wheel Base 41.5 in
Height - Top of Cab 79.9 in
Vehicle Width over Tires 58.9 in
Ground Clearance 6.7 in
Departure Angle 27.9°
Maximum Dump Angle 47.4°
Length - Without Bucket 99.3 in
Clearance at Maximum Lift and Dump 88.7 in
Bucket Pin Reach - Maximum Lift 8.8 in
Maximum Overall Height 150.9 in
Turning Radius from Center - Machine Rear 59.6 in
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Bucket Pin Height - Carry Position 8.4 in
Length - With Bucket on Ground 127.3 in
Bumper Overhang - Behind Rear Axle 35.2 in
Turning Radius from Center - Bucket 77.8 in
Maximum Reach - With Arms Parallel to Ground 49.2 in
Bucket Pin Height - Maximum Lift 118.1 in
Reach - Maximum Lift/Dump 25.7 in
Rack Back Angle - Maximum Height 88.2°
Turning Radius from Center - Coupler 43.4 in

Hydraulic System

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 26 gal/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 35.5 HP
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3336 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow 18 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3336 psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 50.9 HP

Cab

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

Power Train

Travel Speed - Forward or Reverse - One Speed 7.6 mile/h
Travel Speed - Forward or Reverse - Two Speed Option 11.1 mile/h

Service Refill Capacities

Cooling System 3.2 gal (US)
Engine Crankcase 2.6 gal (US)
Fuel Tank 15.1 gal (US)
Hydraulic System 11.9 gal (US)
Hydraulic Tank 9 gal (US)
Chain Box - Each Side 1.8 gal (US)

Noise Level

Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab* 83 dB(A)
Outside Cab** 101 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.