New CAT Equipment

226D3 Skid Steer Loader

The Cat® 226D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Get a Quote

    Learn more about the 226D3 Skid Steer Loader

    Watch

    Product Specs

    Engine

    Gross Power - SAE J1995 67.1 HP
    Net Power - SAE 1349 65.8 HP
    Displacement 134.3 in³
    Stroke 3.9 in
    Bore 3.3 in
    Engine Model Cat C2.2 CRDI
    Peak Torque - 1,500 rpm - SAE J1995 153 ft·lbf
    Net Power - ISO 9249 66.5 HP

    Operating Specifications

    Rated Operating Capacity 1550 lb
    Rated Operating Capacity with Optional Counterweight 1650 lb
    Tipping Load 3100 lb
    Breakout Force - Tilt Cylinder 3927 lb
    Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

    Weights

    Operating Weight 5849 lb
    Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

    Dimensions

    Wheel Base 41.5 in
    Length - With Bucket on Ground 127.3 in
    Length - Without Bucket 99.4 in
    Height - Top of Cab 79.8 in
    Vehicle Width over Tires 58.9 in
    Maximum Overall Height 143.8 in
    Bucket Pin Height - Maximum Lift 110.9 in
    Bucket Pin Height - Carry Position 8.5 in
    Reach - Maximum Lift/Dump 21 in
    Clearance at Maximum Lift and Dump 81.8 in
    Ground Clearance 6.9 in
    Departure Angle 27.9°
    Maximum Dump Angle 46.7°
    Rack Back Angle - Maximum Height 88.9°
    Bumper Overhang - Behind Rear Axle 35.2 in
    Turning Radius from Center - Bucket 77.8 in
    Maximum Reach - With Arms Parallel to Ground 50.7 in
    Turning Radius from Center - Machine Rear 59.6 in
    Turning Radius from Center - Coupler 43.5 in
    Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

    Hydraulic System

    Hydraulic Flow - Standard - Loader Hydraulic Pressure 3336 psi
    Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 3336 psi
    Hydraulic Flow - Standard - Hydraulic Power (Calculated) 33.5 HP
    Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 50.9 HP
    Hydraulic Flow - Standard - Loader Hydraulic Flow 18 gal/min
    Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 26 gal/min

    Cab

    ROPS ISO 3471:2008
    FOPS ISO 3449:2005 Level I

    Power Train

    Travel Speed - Forward or Reverse - One Speed 7.6 mile/h
    Travel Speed - Forward or Reverse - Two Speed Option 11.1 mile/h

    Service Refill Capacities

    Chain Box - Each Side 1.8 gal (US)
    Cooling System 3.2 gal (US)
    Engine Crankcase 2.6 gal (US)
    Fuel Tank 15.1 gal (US)
    Hydraulic System 11.9 gal (US)
    Hydraulic Tank 9 gal (US)

    Air Conditioning System (if equipped)

    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

    Noise Level

    Outside Cab*** 102 dB(A)
    Inside Cab** 83 dB(A)
    Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
    Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.