Engine Power (ISO 14396) | 196 HP |
Bore | 4.1 in |
Derating Altitude | 9842 ft |
Displacement | 427.8 in³ |
Emissions | U.S. EPA Tier 4 Final/EU Stage V |
Engine Model | Cat 7.1 |
Engine RPM | 2,200 |
Standard Capability | 109 °F |
High - Ambient Capability | 122 °F |
Maximum Torque - ISO 9249 | 616 lb/ft |
Stroke | 5.3 in |
Torque Rise - ISO 9294 | 40% |
Number of Cylinders | 6 |
Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
Note (2) | Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Note (3) | Power as declared per ISO 14396 |
Engine Power AWD (ISO 14396) | 196 HP |
Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
Weight (Stage V)* | 38912 lb |
Weight (Tier 4 Final)** | 40488 lb |
All-wheel Drive Weight (AWD) (Tier 4 Final)** | 42119 lb |
All-Wheel Drive Weight (AWD) (Stage V)* | 40543 lb |
Note | * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. |
Width All Wheel Drive (AWD) | 99.3 in |
Length of Machine* | 406.7 in |
Maximum Height | 132.4 in |
Width | 95.6 in |
Note | *Typically equipped with push block and ripper. |
Blade Width | 12 ft |
Arc Radius | 16.3 in |
Blade Height | 24 in |
Cutting Edge Width | 6 in |
End Bit | 6 in |
Throat Clearance | 4.4 in |
Circle Center Shift Left | 29.6 in |
Circle Center Shift Right | 28.7 in |
Maximum Depth of Cut | 28.1 in |
Maximum Lift Above Ground | 18.7 in |
Maximum Shoulder Reach Left | 74.3 in |
Maximum Shoulder Reach Right | 71.3 in |
Moldboard Side Shift Left | 25.6 in |
Moldboard Side Shift Right | 20.7 in |
Blade Tip Range Backward | 5 |
Blade Tip Range Forward | 40 |
Fuel Tank | 78 gal (US) |
Circle Drive with Slip Clutch | 2 gal (US) |
Circle Drive without Slip Clutch | 0.5 gal (US) |
Cooling System | 40 l |
Engine Crankcase | 5.5 gal (US) |
Diesel Exhaust Fluid Tank (Tier 4 Only) | 4.2 gal (US) |
Hydraulic System | 11.9 gal (US) |
Transmission | 4.8 gal (US) |