New CAT Equipment

14 Motor Grader

Loaded With Power, Technology and Operator Features

The Cat® 14 motor grader delivers powerful road grading with precision blade control, fuel efficiency, and smart technology. It’s ideal for haul road maintenance, site preparation, and heavy-duty grading in rugged jobsites.

Get a Quote

Benefits

Move More with Less Fuel

Eco mode saves fuel while maintaining productivity.

Less Arm Movement

Reduce fatigue from arm movement with joystick controls.

Integrated Technologies

Using Cat® Grade technologies can increase your overall productivity with better accuracy, reduce rework, and lower costs.

Learn more about the 14 Motor Grader

Watch

  • Air Conditioning System
    Air Conditioning
    The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
  • Blade Range
    Blade Tip Range - Backward
    5°
    Blade Tip Range - Forward
    40°
    Circle Centershift - Left
    25.6 in
    Circle Centershift - Right
    20.5 in
    Maximum Depth of Cut
    23.3 in
    Maximum Lift Above Ground
    16.5 in
    Maximum Shoulder Reach Outside of Tires - Left
    73.6 in
    Maximum Shoulder Reach Outside of Tires - Right
    78.9 in
    Moldboard Sideshift - Left
    29.1 in
    Moldboard Sideshift - Right
    31.1 in
  • Engine
    Base Power (1st Gear) - Net
    238 hp
    Bore
    5.1 in
    Displacement
    763 in³
    Emissions
    Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
    Engine Model
    Cat C13
    Maximum Altitude - Full Power
    13900 ft
    Maximum Altitude - Full Power (Tier 2)
    12049 ft
    Maximum Altitude - Full Power (Tier 3)
    14349 ft
    Maximum Torque - VHP Plus
    1137 lb/ft
    Note (1)
    Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
    Note (2)
    Optimized VHP Plus is standard for the 14M3.
    Note (3)
    Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Note (4)
    Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
    Note (5)
    Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Number of Cylinders
    6
    Speed at Rated Power
    1,850 rpm
    Standard - Fan Speed - Maximum
    1,600 rpm
    Standard - Fan Speed - Minimum
    550 rpm
    Standard Capability
    122 °F
    Stroke
    6.2 in
    Torque Rise
    41%
  • Frame
    Circle - Outer Diameter
    71.7 in
    Front Axle - Total Oscillation per Side
    32°
    Front Axle - Wheel Lean - Left/Right
    17.1°
  • Moldboard
    Arc Radius
    16.3 in
    Blade Height - With Cutting Edge
    24.9 in
    Blade Height - Without Cutting Edge
    23 in
    Blade Width
    14 ft
    Blade Width - With End Bits
    169 in
    Blade Width - Without End Bits
    164 in
    Throat Clearance
    4.6 in
  • Service Refill Capacities
    Circle Drive
    1.8 gal (US)
    Cooling System
    15.9 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only)
    5.8 gal (US)
    Fuel Tank
    109.9 gal (US)
    Hydraulic System
    33 gal (US)
    Transmission and Differential
    23.5 gal (US)
  • Weights
    Gross Vehicle Weight - Base* - Front Axle
    13994 lb
    Gross Vehicle Weight - Base* - Rear Axle
    36994 lb
    Gross Vehicle Weight - Base* - Total
    50980 lb
    Gross Vehicle Weight - Typically Equipped - Front Axle
    15245 lb
    Gross Vehicle Weight - Typically Equipped - Rear Axle
    42005 lb
    Gross Vehicle Weight - Typically Equipped - Total
    57250 lb
    Note
    *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
    Operating Weight - Typically Equipped
    57250 lb
NOTE
  • Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
  • Joystick, power adjustable armrests
  • Air conditioner with heater
  • Centershift pin indicator
  • Coat hook
  • Cup holder
  • Display, digital speed and gear
  • Doors, left and right side with wiper
  • Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
  • Gauges, machine level
  • Message display
  • Joystick gear selection
  • Joystick hydraulic controls for implements, steering, transmission
  • Ladders, cab, left and right side
  • Lights, left and right side lights
  • Lights, night time cab, LED
  • Meter, hour, digital
  • Mirror, inside rearview, wide angle
  • Power port, 12V
  • Radio ready, entertainment
  • ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
  • Seat, mechanical suspension, cloth
  • Storage compartments
  • Throttle control, electronic
POWER TRAIN
  • Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
  • Articulation, automatic Return-to-Center
  • Air-to-Air After Cooler (ATAAC)
  • Auto Diff Lock
  • Brake wear indication
  • Brakes, oil disc, four-wheel, hydraulic
  • Consistent power to ground
  • Monitoring system
  • Clutch, circle drive slip
  • Differential, lock/unlock*
  • Drain, engine oil, ecology
  • Demand fan, hydraulic
  • Engine ECO Mode
  • Ether starting aid
  • Fuel tank, ground level
  • Fuel-water separator
  • Hydraulic demand fan
  • Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
  • Optimized VHP
  • Parking brake - multi disc, sealed, oil-cooled
  • Priming pump, fuel
  • Sediment drain, fuel tank
  • Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
  • Transmission, 8F/6R, power shift, direct drive
ELECTRICAL
  • Alternator, 150 ampere, sealed
  • Batteries, maintenance free, HD, 1,125 CCA
  • Breaker panel
  • Electrical system, 24V*
  • Belt, serpentine, automatic tensioner
  • Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
  • Product Link
  • Starter, electric
  • Service lights, enclosure, rear, LED
SAFETY
  • Alarm, back up
  • Ground level engine shutdown
  • Hammer (emergency exit)
  • Horn, electric
  • Lockout, hydraulic implement for roading
  • Operator Not Present Monitoring system
  • Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
  • Seat belt, retractable 76 mm (3 in)
  • Secondary steering
  • Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)
NOTE
  • Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
  • Air horn
  • Heated door
  • Mirrors high visibility
  • Mirrors, outside heated 24V
  • Mirrors, outside mounted
  • Seat, heated
  • Seat, heated/ventilated
  • Rearview camera
  • Seat belt indicator
POWER TRAIN
  • Transmission, autoshift
  • Engine, compression brake
TECHNOLOGY
  • Cat GRADE with Cross Slope
  • Stable Blade
  • Advanced Control Joysticks
  • Auto Articulation
GUARDS
  • Debris guard
  • Front axle cylinder guards
  • Rear fenders
  • Sound suppression, engine enclosure and transmission
  • Transmission guard
  • Accumulators, blade lift
  • Fast fill fuel, 378.5 L/min (100 gal/min)
  • Metallic DCM wear strips
ELECTRICAL
  • Light, LED, warning strobe
  • Lights, front headlights high
  • Lights, front headlights low
  • Mounting, for warning light
  • Working lights halogen
  • Working lights LED
SAFETY
  • Additional rearview camera and monitor
  • Machine security system key
OTHER ATTACHMENTS
  • Moldboard, 4.9 m (16 ft)
  • Heater, engine coolant, 120V
  • Heater, engine coolant, 240V
  • Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
  • Product Link satellite, cellular
  • Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
  • Snow wing, mounting frame ready
  • Fast fill
WORK TOOLS/G.E.T.
  • 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
  • Push block, counterweight
  • Ripper, rear
  • Tooth, ripper
FLUIDS
  • Coolant, -51 degrees C (-60 degrees F)

Download Resources

Site Map Legal Terms Privacy Policy Your Privacy Choices California Collection Notice Cookie Policy
Copyright © 2026 Fabick Cat | All Rights Reserved.

Fabick Cat & Fabick Cat Rentals are not affiliated with Fabick, Inc. Click here for more information.