Reversing contractor and push button switch with cable
Electronic speed setting equipment with actuator and speed pick-up
Emergency shutdown equipment with pushbutton, separate, for manual emergency stop
Engine Indicators
Gauge board with set liquid damped pressure gauges for: fuel, lubricating oil, fresh water, starting air, and charge air.
On-engine thermometers for fuel, lubricating oil, fresh water, and charge air
Electric remote speed indicator
Turbocharger and remote speed indicator
Exhaust gas temperature indicator
Control
Manual control on engine, including: control panel with start /stop key, speed setting device, mechanical shutdown device, change over of control functions from engine to remote control
Starting solenoid valve on engine, 24 V DC
Separate electronic speed governor
Monitoring For Unattended Operation
Pressure switches, mounted on engine, for:
Switches for:
Control Cabinet with housings for wall mounting, including:
Starting Air System
Separate non-return valve for the starting air pipe to the engine
Air Intake System
Air intake filter, fitted on the turbocharger
Air bottles, separate
Fuel System
Separate circulating pump driven by electric motor, horizontal or vertical
Duplex filter with differential pressure indication
Exhaust System
Turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine), with compressor cleaning device
Expansion joint separate
Separate silencer and spark arrester, unlagged 35 dB(A)
Fresh Cooling Water System
HT pump, fitted on engine
LT pump, separate, vertical design, electric motor driven
HT thermostat, not powered and separate
Engine preheating equipment, fitted on base frame
Lubricating Oil System
Plate cooler, fitted on engine
Force pump, fitted on engine
Prelubrication pump, fitted on base frame, electric motor driven
Boll and Kirch automatic backflushing filter, separate
Duplex filter with differential pressure indication, separate
Pressure control valve, separate
Thermostat, not powered, separate
Connecting Parts - Engine
Set of connecting parts between flange coupling and flywheel
Flexible flange coupling between engine and generator
Base frame with flywheel guard and incorporating lube oil sump tank, for engine and generator
Mounting of engine and generator on the base frame
Set of bonded rubber rails for resilient mounting of the base frame
Set of flexible pipe connections
Tools
Set of tools for the engine including hydraulic tightening tools and nozzle tester
Set of tools for turbocharger
Inside micrometer for cylinder liners
Ruler for cylinder liner
Spare Parts
Set of engine spare parts for unrestricted operation
