Cat® C7.1 ACERT™ Industrial Power Unit

C7.1 ACERT™ Tier 4 Industrial Power Unit Diesel Power Units - Highly Regulated

Cat® C7.1 ACERT™ Industrial Power Unit

The C7.1 ACERT™ Industrial Power Unit is offered in ratings ranging from 151-205 bkW (202-275 bhp) @ 1800-2200 rpm. These ratings meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Learn More About This Piece of Equipment

360° Views

Product Specs

Aftertreatment Dimensions - Approximate

Weight
124-134 kg (273.4-295.4 lb)
Diameter
287-337.8 mm (11.3-13.3 in)
Width
714.4 mm (28.1 in)
Height
618.5-643.9 mm (24.3-25.3 in)

General

Lube System - Refill
13-16 L (13.7-16.9 qt)
Cooling System - Capacity
15.2 L (16 qt)
Rotation from Flywheel End
Counterclockwise
Compression Ratio
16.5:1
Aspiration
Series Turbocharged Aftercooled (TTA)
Displacement
7.01 L (427.7 in³)
Stroke
135 mm (5.3 in)
Bore
105 mm (4.13 in)
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel

Emission Standards

Emissions
U.S. EPA Tier 4 Final, EU Stage IV

Power Rating

Rated Speed
1800-2200 rpm
Minimum Power
202BHP
Maximum Power
275BHP

Power Unit Dimensions - Approximate

Length
1461 mm (57.5 in)
Width
1769 mm (69.6 in)
Height
916 mm (36.1 in)
Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
1000 kg (2204 lb)

Equipment

  • Air Inlet
    • Standard air cleaners
  • Control System
    • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
    • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
  • Cooling System
    • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
    • 50:50 water glycol mix
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels And Flywheel Housing
    • Wide choice of drivetrain interfaces, including SAE No. 1, SAE No. 2, and SAE No. 3 configurations
  • Fuel System
    • Electronic high pressure common rail
    • ACERT Technology
    • Innovative filter design to ensure maximum protection of the engine
  • Lube System
    • Wide choice of sumps for different applications
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Interim, Eu Stage Iiib Aftertreatment / Clean Emissions Control Equipment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • 3" flex pipe connection kit with straight, 45°, and 90° options for flexibility
  • U.s. Epa Tier 4 Final, Eu Stage Iv Aftertreatment/ Clean Emissions Control Equipment
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • Selective Catalytic Reduction (SCR)
    • 3" flex pipe connection with straight, 45°, and 90° options for flexibility

Optional Equipment

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations