Cat® C3.6 Diesel Engine

C3.6 Tier 4 Diesel Engines - Highly Regulated

Cat® C3.6 Diesel Engine

The Cat® C3.6 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 100 bkW (134 bhp) @ 2200 rpm. The C3.6 is designed to meet the needs of many industries and applications, including agricultural tractors, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.

Learn More About This Piece of Equipment

360° Views

Product Specs

Engine Dimensions - Approximate

Width
569 mm (22.4 in)
Length
667 mm (26.3 in)
Height
776 mm (30.6 in)
Dry Weight - Basic Operating Engine Without Optional Attachments
275 kg (606 lbs)

Aftertreatment Dimensions - Approximate

SCR Weight
TBA
SCR Length
TBA
DOC Weight
TBA
SCR Diameter
TBA
DOC Length
TBA
DOC Diameter
TBA

General

Cooling System - Capacity
4 L (1.06 qt)
Rotation from Flywheel End
Counterclockwise
Combustion System
Direct Injection
Compression Ratio
17:1
Displacement
3.6 L (220 in³)
Aspiration
Turbocharged-Aftercooled (TA)
Stroke
120 mm (4.7 in)
Bore
98 mm (3.9 in)
Engine Configuration
In-Line 4, 4-Stroke-Cycle Diesel

Emission Standards

Emissions
U.S. EPA Tier 4 Final Nonroad Emission Standards. Also designed to meet proposed EU Stage V Nonroad Emission Standards.

Power Rating

Rated Speed
2000-2400 rpm
Minimum Power
74BHP
Maximum Power
134BHP

Equipment

  • Control System
    • Starter motor (12V or 24V)
    • Alternator (12V or 24V)
    • Electronic Control Unit (chassis mounted)
    • Engine control sensors and robust wiring harness
    • Data interface via CANbus J1939
  • Flywheels And Flywheel Housing
    • Flywheel housings – SAE 3 or SAE 4
    • Choice of flywheel to match industry common hydraulic pumps and transmissions
    • Side PTO with SAE A or SAE B interface
  • Fuel System
    • Fuel filter – preconnected but chassis mounted
    • With water sensor
  • Lube System
    • Lubricating oil filters
    • High incline oil pan – 35° continuous in all directions
  • General
    • Cold start capability to -20° C (-4° F) with standard equipment
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Final, Proposed Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
    • Diesel Oxidation Catalyst (DOC)
    • Selective Catalytic Reduction (SCR)
    • SCR Auxiliaries

Optional Equipment

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations