Cat® C18 Industrial Power Unit

C18 Tier 4 Industrial Power Units - Highly Regulated

Cat® C18 Industrial Power Unit

Learn More About This Piece of Equipment

360° Views

Product Specs

PETU Dimensions - Tier 4 Final Only

Volume Capacity
51.1qt (US)
Weight
42.8lb
Height
21.7in
Width
11.3in
Length
33.6in

General

Rotation from Flywheel End
Counterclockwise
Compression Ratio
16.0:1
Aspiration
Turbocharged Aftercooled (TA)
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
5.7in
Stroke
7.2in
Displacement
1104.5in³
Aftertreatment
DOC+DPF+SCR

Emission Standards

Emissions
U.S. EPA Tier 4 Final, EU Stage V

Power Unit Dimensions

Length
99.7in
Width
48.9in
Height
79in
Weight
5842lb

Power Rating

Rated Speed
1800-2000 rpm
Minimum Power
575HP
Maximum Power
630HP

Aftertreatment Dimensions

Weight
591lb
Diameter
13in
Height
25.7in
Width
43.8in

Equipment

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Remote fan control
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels And Flywheel Housing
    • Choice of SAE No. 0 or SAE No. 1 flywheel housing
    • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
  • Fuel System
    • MEUI injection
    • Primary fuel filter
    • Secondary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
  • Power Take Off (pto)
    • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Interim, Eu Stage Iiib Aftertreatment / Clean Emissions Control Equipment
    • Cat Regeneration System
    • Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
    • Available in 12 volt or 24 volt systems
  • U.s. Epa Tier 4 Final, Eu Stage Iv Aftertreatment/ Clean Emissions Control Equipment
    • Cat Regeneration System
    • Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • Aftertreatment Electronic Control Unit (ECU)
    • NOx Reduction System (NRS)
    • Pump Electronic Control Unit (PETU)
    • Selective Catalytic Reduction (SCR)
    • Available in 12V or 24V systems

Optional Equipment

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations