CG137-12 Gas Engine

CG137-12 Gas Compression Engine

CG137-12 Gas Engine

Tough and durable, with field-proven head design to maximize time between overhauls. CG137 engines are equipped with ADEM A4 technology that brings performance, uptime, and low operating cost to your operation. CG137 engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime. Ideal applications for CG137-12 engines include gas lift, gas gathering, and wellhead gas compression. Cat CG137-12 gas engine. Ratings: 447 bkW (600 bhp) @ 1800 rpm are NSPS site compliant capable with Caterpillar air-fuel ratio control and aftertreatment.

Learn More About This Piece of Equipment

360° Views

Product Specs

Engine Specifications

Oil Change Interval
750 hours
Flywheel Teeth
136
Flywheel and Flywheel Housing
SAE No. 14 or 18, Flywheel Housing SAE No. 0
Rotation from Flywheel End
Counterclockwise
Aspiration
Turbocharged-Aftercooled
Compression Ratio
8.3:1
Displacement
1648in³
Emissions
NSPS 2010
Maximum Rating
600BHP
Minimum Rating
600BHP
Weight - Dry
6250lb
Ignition, Protection
Electronic ADEM A4
Air/Fuel Ratio Control
Electronic ADEM A4
Bore
5.4in
Stroke
6in

Capacity for Liquids

Lube Oil System - Refill
45gal (US)
Cooling System
20gal (US)

Equipment

  • Air Inlet System
    • Air cleaner — single element with service indicator
    • Optional air inlet adapter and rain cap — recommended for weather protection
  • Control System
    • ADEM A4
    • Class 1, Division 2, Group C&D and Zone 2
  • Cooling System
    • Jacket water thermostats and housing — full open temperature 98°C (208°F)
    • Jacket water pump — gear driven, centrifugal, non-self-priming
    • Aftercooler water pump — gear driven, centrifugal, non-self-priming
    • Aftercooler core — for treated water and sea air atmosphere
  • Exhaust System
    • Exhaust manifolds — watercooled
    • Exhaust elbow — dry 203 mm (8 in)
    • Three-way catalyst — 1.0 g NOx and 0.5 g NOx NTE options
  • Flywheels & Flywheel Housings
    • Flywheel, SAE No. 14 or 18
    • Flywheel housing, SAE No. 0
    • SAE standard rotation
  • Fuel System
    • Air/fuel ratio control
    • Gas pressure regulator
    • Natural gas carburetor
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Oil filler in valve cover, dipstick — RH
  • Mounting System
    • Engine mounting rails — 254 mm (10 in) industrialtype, entire length
  • Protection System
    • ADEM A4 protection
    • The following include alarm and shutdown:
    • The following is display only
  • General
    • Paint, Caterpillar yellow
    • Crankshaft vibration damper and drive pulleys
    • Lifting eyes
    • Cylinder block inspection covers

Optional Equipment

  • Charging Alternator
    • 24V, 35A CSA alternator
  • Exhaust System
    • Exhaust flex fitting
    • Exhaust elbow
    • Exhaust flange — ANSI
  • Instrumentation
    • Operator interface panel
    • Operator interface panel enclosure
    • 15', 20', 50' interconnect harness
  • Starting System
    • Air pressure regulator
    • Air start silencer
    • Vane starter
    • Electric starter
    • Turbine starter
  • Fuel System
    • Fuel filter
  • Air Inlet System
    • Precleaner
    • Rain cap

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations