Cat C32 Propulsion Engine (US EPA Tier 4 / IMO III)

Cat C32 Marine Propulsion (US EPA Tier 4 / IMO III)

Cat C32 Propulsion Engine (US EPA Tier 4 / IMO III)

Product Specs

Clean Emissions Module (CEM) - Dimensions

6 Brick Z-Flow - Length
147.7in
6 Brick Z-Flow - Height
23.5in
6 Brick Z-Flow - Width
43.5in
6 Brick U-Flow - Length
85in
6 Brick U-Flow - Height
23.5in
6 Brick U-Flow - Width
56.9in
Dosing Cabinet - Length
37.4in
Dosing Cabinet - Height
22.8in
Dosing Cabinet - Width
18.8in

Dimensions & Weights

Minimum Length
83.9in
Maximum Length
89.8in
Minimum Height
59.3in
Maximum Height
63.5in
Minimum Width
57.1in
Maximum Width
57.3in

Engine Specifications

Configuration
Vee 12, 4-stroke-cycle diesel
Emissions
U.S. EPA Tier 4 Final certified IMO III emissions certified (SCR required)
Rated Engine Speed
1600-2150 rpm
Bore
5.71in
Stroke
6.38in
Displacement
1959in³
Aspiration
Turbocharged-aftercooled aspiration
Governor
Electronic (A5 ECM)
Refill Capacity
Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan
Oil Change Interval
1000 hrs - deep pan
Cooling
Heat exchanger or keel cooled
Flywheel Housing
SAE No. 0 with SAE No. 18 flywheel (136 teeth)
Rotation
Counterclockwise from flywheel end

Equipment

  • Control System
    • 24V control system
  • Cooling System
    • Heat exchanger or Keel Cooling
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • Lube System
    • Oil fill, simplex filter and dipstick
    • Deep or shallow sump oil pan
  • Mounting System
    • Adjustable front support mounting system
  • General
    • Right or left hand service sides
    • Customer wiring and service tool connector
  • Air Inlet System
    • Separate circuit aftercooled (SCAC)
    • Air cleaner
  • Fuel System
    • Duplex fuel filters with hybrid fuel lines
    • Fuel transfer and priming pump
    • Shipped loose primary fuel filter with water separator

Optional Equipment

  • Air Inlet System
    • Closed crankcase fumes disposal
  • Alarm And Protection
    • MECP I control panel
    • MECP III B control panel with Cat® Alarm and Protection System
  • Charging System
    • Charging alternator
  • Fuel System
    • Fuel cooler
    • Manual or electric fuel priming pump
  • Lube System
    • Duplex oil filters
  • Power Take-offs
    • Front drives including stub shaft and pump drive
    • Rear SAE A or B pump drives
  • Starting System
    • Starting motors – air, electric or dual

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations