-
Capacity for Liquids
Cooling System
124 gal (US)Lube Oil System - Refill
187 gal (US) -
Engine Specifications
Aspiration
Turbocharged-AftercooledBore
11.8 inCompression Ratio
9.2:1 Gen 1 (7:6:1 Gen 2)Displacement
7762 in³Emissions
NSPS Site Compliant CapableFlywheel Teeth
255Ignition, Protection
Electronic (ADEM™ A4)Maximum Rating
2065 BHPMinimum Rating
1900 BHPOil Change Interval
5000 hoursRotation from Flywheel End
CounterclockwiseStroke
11.8 inWeight - Dry
36883 lb
Air Inlet System
- Air cleaner — standard-duty inlet air adapter
Control System
- A4 control system — provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
- Electrical system and instrumentation certified for Class I, Division 2, Group D hazardous location. Includes entire ADEM A4 system and optional control panel.
Cooling System
- Jacket water pump
- Jacket water thermostats and housing
- Aftercooler/oil cooler pump
- Aftercooler/oil cooler thermostats and housing
- Two-stage aftercooler
- Jacket water heater connections
- Standard ANSI connections
Exhaust System
- Dry exhaust manifolds
- Single vertical outlet adapter
- Stainless steel encapsulated insulation
Flywheels and Flywheel Housing
- SAE standard rotation
Fuel System
- Gas admission valves -- electronically controlled fuel supply pressure
Ignition System
- A4 control system — senses individual cylinder detonation and controls individual cylinder timing
Lube System
- Crankcase breathers (top mounted)
- Oil cooler
- Oil filter
- Oil pan drain valves -- front and rear
Mounting System
- Engine mounting feet (four total)
Protection
- Electronic shutoff system with purge cycle
- Crankcase explosion relief valves
- Gas shutoff valve
Starting System
- Air starting system
General
- Paint — Cat yellow
- Vibration dampers
Air Inlet System
- Heavy-duty air cleaner with precleaners
Charging System
- 35 Amp & 65 Amp charging alternators – CSA approved
Exhaust System
- Flexible bellows adapters
- Exhaust expander
- Weld flanges
Fuel System
- Fuel filter
- Gas pressure regulator
- Flexible connection
Instrumentation
- LCD display panel
- Remote data monitoring and speed control
- Color HMI display
- Compatible with Cat® Electronic Technician (ET) and Data View
- Modbus and Ethernet capable
Lube System
- Air or electric motor-driven prelube
- Duplex oil filter
- RH Service
- Lube oil makeup system
Mounting System
- Mounting plates (set of four)
- Extra mounting feet (set of two)
- Extra mounting plates (set of two)
Power Take-Offs
- Front stub shafts
Starting System
- Air pressure reducing valve
General
- Engine barring device
- Damper guard