Engine Model (1) | Cat® C18 |
Bore | 5.7 in |
Stroke | 7.2 in |
Displacement | 1106 in³ |
Engine Power - Gross SAE J1995* | 469 HP |
Engine Power - ISO 14396 | 460 HP |
Engine Power - Net Power SAE J1349/ISO 9249 | 436 HP |
Note | *Excludes all fan losses. |
Net SAE J1349/ISO 9249 | 436 HP |
Engine Model (2) | Cat C18 ACERT |
Flywheel Power | 436 HP |
Emissions | U.S. EPA Tier 4 Final and EU Stage IV |
Operating Weight | 106618 lb |
Shipping Weight | 80062 lb |
1 Forward | 2.4 mile/h |
2 Forward | 4.2 mile/h |
3 Forward | 7.3 mile/h |
1 Reverse | 2.9 mile/h |
2 Reverse | 5.2 mile/h |
3 Reverse | 8.9 mile/h |
1 Forward - Drawbar Pull | 161000 lbf |
2 Forward - Drawbar Pull | 90000 lbf |
3 Forward - Drawbar Pull | 50000 lbf |
Pump Type | Piston-type pump geared from flywheel |
Pump Output - Steering | 102 gal/min |
Pump Output - Implement | 60 gal/min |
Tilt Cylinder Flow - Rod End Flow | 37 gal/min |
Tilt Cylinder Flow - Head End Flow | 50 gal/min |
Lift Cylinder Relief Valve Setting | 3800 psi |
Tilt Cylinder Relief Valve Setting | 2800 psi |
Ripper - Lift - Relief Valve Setting | 3800 psi |
Ripper - Pitch - Relief Valve Setting | 3800 psi |
Steering System - Pressure | 5875 psi |
Tank Capacity | 23.5 gal (US) |
Shoe Type | Extreme Service |
Width - Shoe | 24 in |
Shoes/Side | 43 |
Grouser Height | 3.3 in |
Pitch | 9.4 in |
Ground Clearance | 23.5 in |
Track Gauge | 88.6 in |
Length - Track on Ground | 136.6 in |
Ground Contact Area | 6569 in² |
Track Rollers/Side | 8 |
Number of Carrier Rollers | 1 per side (optional) |
Fuel Tank | 217 gal (US) |
DEF Tank | 9.5 gal (US) |
Cooling System | 25.9 gal (US) |
Engine Crankcase* | 9.7 gal (US) |
Power Train | 43.3 gal (US) |
Final Drive - Each | 3.9 gal (US) |
Roller Frames - Each | 11.9 gal (US) |
Pivot Shaft Compartment | 7.9 gal (US) |
Hydraulic Tank Oil - Only | 23.5 gal (US) |
Note | *With oil filters. |
Winch Model | PA 140VS |
Weight* | 3950 lb |
Oil Capacity | 4 gal (US) |
Increased Tractor Length | 21.9 in |
Drum Width | 12.6 in |
Wire Cable Diameter - Recommended | 1.13 in |
Wire Cable Diameter - Optional | 1.25 in |
Maximum Drum Capacity - Recommended Cable Length | 257 ft |
Maximum Drum Capacity - Optional Cable Length | 204 ft |
Wire Cable Ferrule Size - Length | 2.8 in |
Wire Cable Ferrule Size - Outside Diameter | 2.4 in |
Note | *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). |
ROPS | ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria SAE J1040 May 94, ISO 3471:1994. |
FOPS | FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II. |
Ground Clearance* | 23.4 in |
Track Gauge | 88.6 in |
Width - Without Trunnions - Standard Shoe | 113.4 in |
Width - Over Trunnions | 129.9 in |
Height - FOPS Cab* | 150.4 in |
Height - Top of Stack* | 157.4 in |
Height - ROPS/Canopy* | 157.5 in |
Drawbar Height (Center of Clevis)* | 30 in |
Length - Track on Ground | 136.6 in |
Overall Length - Basic Tractor | 193.3 in |
Length - Basic Tractor - With Drawbar | 204 in |
Length - Basic Tractor - With Winch | 218.3 in |
Length - With SU-Blade** | 270.9 in |
Length - With U-Blade | 274.3 in |
Length - With Single-Shank Ripper | 257 in |
Length - With Multi-Shank Ripper | 257.4 in |
Overall Length - SU-Blade/SS Ripper | 324 in |
Note (1) | *Includes grouser height for total dimensions on hard surfaces. |
Note (2) | **Includes drawbar. |