Engine Model | Cat C4.4 |
Power - Net | 104 HP |
Displacement | 269 in³ |
Bore | 4.13 in |
Stroke | 5 in |
Net Power - 2,200 rpm - SAE J1349 | 104 HP |
Note | Engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards. |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 104 HP |
Drive Pumps | 1 |
Maximum Travel Speed - Forward | 5.6 mile/h |
Relief Valve Settings | 7033 psi |
Maximum Travel Speed - Reverse | 6.2 mile/h |
Track Motors | 2 |
Operating Weight - XL | 20313 lb |
Operating Weight - LGP | 20992 lb |
Note | Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank. |
Operating Weight - LGP, 762 mm/30 in | 21442 lb |
Fuel Tank | 51.5 gal (US) |
Crankcase - With Filter | 2.91 gal (US) |
Final Drive - Each - XL | 2.6 gal (US) |
Cooling System | 5.92 gal (US) |
Final Drive - Each - LGP | 2.6 gal (US) |
Transmission - Hydraulic Tank | 15.7 gal (US) |
Diesel Exhaust Fluid (DEF) Tank | 4.9 gal (US) |
Pump Output | 17.7 gal/min |
Relief Valve Settings | 2988 psi |
Track Gauge - LGP, 762 mm (30 in) | 73.2 in |
Length - Track on Ground - XL | 91 in |
Length - Track on Ground - LGP | 91 in |
Shoe Width - LGP | 26 in |
Ground Pressure - XL | 5.6 psi |
Shoe Width - LGP, 762 mm (30 in) | 30 in |
Ground Contact Area - LGP | 4726 in² |
Shoe Width - XL | 20 in |
Ground Contact Area - XL | 3652 in² |
Ground Pressure - LGP | 4.5 psi |
Track Gauge - LGP | 69 in |
Ground Contact Area - LGP, 762 mm (30 in) | 5514 in² |
Ground Pressure - LGP, 762 mm (30 in) | 3.93 psi |
Track Gauge - XL | 63 in |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 40 |
Length - Track on Ground - LGP, 762 mm (30 in) | 91 in |
Number of Shoes - Each Side - SystemOne Undercarriage | 36 |
Number of Rollers - Each Side | 7 |
Type | Parallelogram |
Number of Shanks | 3 |
Height | 6.5 in |
Weight | 1222 lb |
Overall Width | 67.3 in |
Maximum Reach - Ground Line | 21.9 in |
Maximum Digging Depth | 13.3 in |
Maximum Ground Clearance Under Tip | 17.6 in |
Weight | 1345 lb |
Winch Drive | Hydrostatic |
Control | Hydraulic |
Speed | Variable |
Drum Capacity - Optional Cable | 256 ft |
Winch Length | 27.76 in |
Maximum Line Pull - Bare Drum | 40000 lb |
Throat Clearance | 6.75 in |
Maximum Line Speed - Bare Drum | 131 ft/min |
Rope Diameter - Recommended | 0.63 in |
Drum Diameter | 10 in |
Overall Width | 29.2 in |
Rope Diameter - Optional | 0.75 in |
Maximum Line Speed - Full Drum | 207 ft/min |
Maximum Line Pull - Full Drum | 25000 lb |
Drum Capacity - Recommended Cable | 371 ft |
Drum Width | 10.8 in |
FOPS | ISO 3449:2005 Level II |
Sound Levels - SAE J1166 FEB2008 | 79 dB(A) |
Sound Levels - ISO 6396:2008 | 79 dB(A) |
ROPS | ISO 6396:2008 |
Ground Clearance - XL | 13 in |
BLADE: Blade Width at Maximum Angle - Intermediate | 105.1 in |
Width - Tractor - Standard Shoes - No Blade - LGP (770 mm/30 in) | 103.5 in |
BLADE: Blade Capacity (SAE) - Intermediate | 2.73 yd³ |
BLADE: Blade Width at Maximum Angle - LGP | 115.8 in |
Width - Tractor - Standard Shoes - No Blade - XL | 83.1 in |
BLADE: Blade Height - Intermediate | 39.8 in |
Tractor Height - LGP | 109 in |
Ground Clearance - LGP, 770 mm (30 in) Shoes | 13 in |
BLADE: Blade Capacity (SAE) - LGP | 3.06 yd³ |
BLADE: Blade Lift Height - XL | 30.2 in |
Overall Length - With Blade - LGP | 169.1 in |
Track Gauge - LGP | 68.9 in |
BLADE: Blade Capacity (SAE) - XL | 2.86 yd³ |
BLADE: Digging Depth - XL | 23.1 in |
Track Gauge - LGP, 770 mm (30 in) | 73.2 in |
BLADE: Blade Width at Maximum Angle - XL | 103.8 in |
BLADE: Digging Depth - Intermediate | 22.5 in |
Width - Tractor - Standard Shoes - No Blade - LGP | 94.9 in |
BLADE: Blade Width - XL | 109.5 in |
Overall Length - With Blade - LGP, 770 mm (30 in) Shoes | 169.1 in |
BLADE: Blade Lift Height - Intermediate | 30.2 in |
Tractor Height - LGP, 770 mm (30 in) | 109 in |
BLADE: Maximum Tilt - XL | 15.8 in |
BLADE: Digging Depth - LGP | 22.5 in |
Length - Basic Tractor - Without Blade - LGP | 128.5 in |
BLADE: Blade Height - LGP | 39.8 in |
Tractor Height - XL | 109 in |
BLADE: Maximum Tilt - LGP | 17.6 in |
BLADE: Blade Cutting Edge Angle, Adjustable - XL | 52° to 58° |
Track Gauge - XL | 63 in |
Length - Basic Tractor - Without Blade - LGP, 770 mm (30 in) Shoes | 128.5 in |
Ground Clearance - LGP | 13 in |
BLADE: Blade Lift Height - LGP | 30.2 in |
BLADE: Blade Width - Intermediate | 115 in |
Length - Basic Tractor - Without Blade - XL | 128.5 in |
BLADE: Blade Height - XL | 42.2 in |
BLADE: Maximum Angle (either side) - LGP | 25° |
Overall Length - With Blade - XL | 170.1 in |
BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
BLADE: Maximum Tilt - Intermediate | 17.6 in |
BLADE: Maximum Angle (either side) - Intermediate | 25° |
BLADE: Maximum Angle (either side) - XL | 25° |
BLADE: Blade Width - LGP | 126.7 in |
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate | 52° to 58° |