New CAT Equipment
D10T2 Dozer
Get a Quote
Learn more about the D10T2 Dozer
Product Specs
Engine
| Engine Model | Cat® C27 |
| Flywheel Power | 600 HP |
| Bore | 5.4 in |
| Stroke | 6 in |
| Displacement | 1648 in³ |
| Engine Power - Gross SAE J1995* (FWD/REV) | 471/571 kW (632/766 HP) |
| Engine Power - ISO 14396 (FWD/REV) | 462/562 kW (620/754 HP) |
| Engine Power - Net SAE J1349/ISO 9249 (FWD/REV) | 447/538 kW (600/722 HP) |
| Note (1) | *Excludes all fan losses. |
| Engine Power - Net SAE J1349/ISO 9249 DIN (FWD/REV) | 608/732 mhp |
| Net SAE J1349/ISO 9249 (FWD/REV) | 447/538 kW (600/722 HP) |
| Emissions | U.S. EPA Tier 4 Final |
| Net SAE J1349/ISO 9249 DIN (FWD/REV) | 608/732 mhp |
| Note (2) | Engine ratings apply at 1,800 rpm. |
| Note (3) | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
| Note (4) | No derating (in FWD gears) required up to 4572 m (15,000 ft) altitude. |
Weights
| Operating Weight | 154700 lb |
| Shipping Weight | 109775 lb |
| Note (2) | D10T2 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm/24 in ES shoes. |
| Note (1) | D10T2 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm/24 in ES shoes, and operator. |
Dimensions (Approximate)
| Height - ROPS/Canopy* | 173.5 in |
| Length - Basic Tractor - With Drawbar | 220.4 in |
| Width - Over Trunnions | 147.1 in |
| Length - With U-Blade | 305.1 in |
| Length - With Multi-Shank Ripper | 285.1 in |
| Drawbar Height (Center of Clevis) | 34 in |
| Overall Length - Basic Tractor | 209.6 in |
| Length - With Single-Shank Ripper | 278.8 in |
| Length - With SU-Blade | 292 in |
| Height - Top of Stack* | 171.5 in |
| Track Gauge | 100.4 in |
| Length - Track on Ground | 152.8 in |
| Height - FOPS Cab* | 161.3 in |
| Overall Length - SU-Blade/SS Ripper | 360.6 in |
| Width - Without Trunnions - 610 mm/24 in ES | 129.6 in |
| Ground Clearance* | 28.5 in |
Transmission
| 1 Forward | 2.5 mile/h |
| 2 Forward | 4.5 mile/h |
| 3 Forward | 7.9 mile/h |
| 1 Reverse | 3.2 mile/h |
| 2 Reverse | 5.6 mile/h |
| 3 Reverse | 9.8 mile/h |
| Type | 3-speed planetary powershift |
| Transmission Clutch Diameter | 17.1 in |
Hydraulic Controls
| Pump Type | Variable displacement piston |
| Bulldozer Relief Valve Setting | 4061 psi |
| Tilt Cylinder Relief Valve Setting | 2944 psi |
| Ripper - Lift - Relief Valve Setting | 4061 psi |
| Ripper - Pitch - Relief Valve Setting | 4061 psi |
| Combined Pump Output - Implement | 100.4 gal/min |
| Note (1) | Pump output measured at 1,800 rpm engine speed. |
| Note (2) | Electro-hydraulic pilot valves assist operations of ripper and dozer controls. |
| Note (3) | Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers. |
Undercarriage
| Shoe Type | Extreme Service (ES) |
| Width - Shoe | 24 in |
| Shoes/Side | 44 |
| Grouser Height | 3.7 in |
| Pitch | 10.25 in |
| Ground Clearance | 28.5 in |
| Track Gauge | 100.4 in |
| Length - Track on Ground | 152.8 in |
| Ground Contact Area | 7347 in² |
| Track Rollers/Side | 8 |
| Number of Carrier Rollers | 1 per side (optional) |
Service Refill Capacities
| Fuel Tank | 314.4 gal (US) |
| Cooling System | 47.6 gal (US) |
| Engine Crankcase* | 18 gal (US) |
| Power Train | 60.8 gal (US) |
| Final Drive - Each | 6.1 gal (US) |
| Roller Frames - Each | 16.9 gal (US) |
| Pivot Shaft Compartment | 8.7 gal (US) |
| Hydraulic Tank | 34.6 gal (US) |
| Note | *With oil filters. |
Track Roller Frame
| Oscillation | 13.8 in |
Steering and Brakes
| Spring Applied Multiple-disc Brake | 15.4 in |
| Hydraulically Applied Multiple-disc Steering Clutch | 15.4 in |
Standards
| FOPS | Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II. |
| Sound (2) | The operator equivalent sound pressure level (ISO 6396) is 77 dB(A)/74 dB(A) (sound suppressed). |
| Sound (1) | The exterior sound pressure level for the standard machine (ISO 6395) is 115 dB(A)/111 dB(A) (sound suppressed). |
| ROPS | Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008. |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (3.0 tons). |