New CAT Equipment

D1 Track-Type Tractor

The new Cat® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Get a Quote

    Learn more about the D1 Track-Type Tractor

    Watch

    Product Specs

    Engine

    Engine Model Cat C3.6
    Power - Net 80 HP
    Displacement 220 in³
    Net Power - 2,200 rpm - SAE J1349 80 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 80 HP
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

    Engine 

    Power Train  Hydrostatic

    Weights 

    Operating Weight  17855 lb

    Weights

    Operating Weight - LGP 18839 lb
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Operating Weight - LGP, 762 mm/30 in 19295 lb
    Note (2) For machine with ripper, add 554 kg (1,222 lb).

    Cab

    FOPS ISO 3449:2005 Level II
    ROPS ISO 3471:2008

    Transmission

    Drive Pumps 1
    Maximum Travel Speed - Reverse 6.2 mile/h
    Relief Valve Settings 7033 psi
    Maximum Travel Speed - Forward 5.6 mile/h
    Track Motors 2

    Undercarriage

    Length - Track on Ground - LGP, 762 mm (30 in) 89 in
    Length - Track on Ground - LGP 89 in
    Track Gauge - LGP 68 in
    Shoe Width - LGP, 762 mm (30 in) 30 in
    Track Gauge - LGP, 762 mm (30 in) 73 in
    Shoe Width - LGP 25 in
    Track Gauge 59 in
    Shoe Width - Standard 16 in
    Ground Pressure - LGP 4.3 psi
    Ground Pressure - LGP, 762 mm (30 in) 3.7 psi
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43
    Number of Rollers - Each Side 6

    Undercarriage 

    Length of Track on Ground  89 in
    Number of Shoes - Each Side - Abrasion Undercarriage  38
    Ground Pressure  6.45 psi

    Service Refill Capacities

    Final Drive - Each - LGP 2.6 gal (US)
    Cooling System 4.2 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US)
    Transmission - Hydraulic Tank 23.8 gal (US)
    Crankcase - With Filter 2.8 gal (US)
    Fuel Tank 51.5 gal (US)

    Service Refill Capacities 

    Final Drives - Each Side  2.6 gal (US)

    Hydraulic Controls

    Pump Output 17.2 gal/min
    Relief Valve Settings 2988 psi

    Ripper

    Type Parallelogram
    Number of Shanks 3
    Height 6.5 in
    Weight 1222 lb
    Maximum Ground Clearance Under Tip 17.6 in
    Maximum Digging Depth 13.3 in
    Overall Width 67.3 in
    Maximum Reach - Ground Line 30.2 in

    Winch

    Weight 1345 lb
    Winch Drive Hydrostatic
    Control Hydraulic
    Speed Variable
    Drum Capacity - Optional Cable 256 ft
    Maximum Line Speed - Full Drum 207 ft/min
    Rope Diameter - Optional 0.75 in
    Maximum Line Pull - Full Drum 25000 lb
    Maximum Line Speed - Bare Drum 131 ft/min
    Rope Diameter - Recommended 0.63 in
    Drum Width 10.8 in
    Drum Capacity - Recommended Cable 371 ft
    Maximum Line Pull - Bare Drum 40000 lb
    Drum Diameter 10 in
    Winch Length 27.76 in
    Throat Clearance 6.75 in
    Overall Width 29.2 in

    Air Conditioning System

    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Dimensions

    BLADE: Digging Depth - Intermediate 22.5 in
    Width - Tractor - Standard Shoes - No Blade - LGP (762 mm/30 in) 94.9 in
    BLADE: Blade Capacity (SAE) - LGP 2.17 yd³
    BLADE: Blade Lift Height - LGP 28.7 in
    Length - Basic Tractor - Without Blade - LGP, 762 mm (30 in) 129.6 in
    BLADE: Maximum Tilt - LGP 17.2 in
    BLADE: Blade Width - LGP 124 in
    Ground Clearance - LGP 13 in
    BLADE: Blade Width at Maximum Angle - LGP 113.1 in
    BLADE: Digging Depth - LGP 22.5 in
    BLADE: Blade Lift Height - Intermediate 29.3 in
    Track Gauge - LGP 67.9 in
    Ground Clearance - LGP, 762 mm (30 in) 13 in
    Width - Tractor - Standard Shoes - No Blade - LGP 92.9 in
    BLADE: Blade Height - LGP 33.8 in
    Overall Length - With Blade - LGP, 762 mm (30 in) 167.8 in
    Track Gauge - LGP, 762 mm (30 in) 73 in
    BLADE: Blade Height - Intermediate 33.9 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
    Tractor Height - LGP, 762 mm (30 in) 108.9 in
    BLADE: Maximum Angle (either side) - LGP 25°
    BLADE: Blade Capacity (SAE) - Intermediate 1.96 yd³
    Length - Basic Tractor - Without Blade - LGP 129.6 in
    BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate 52° to 58°
    BLADE: Blade Width at Maximum Angle - Intermediate 105.1 in
    BLADE: Maximum Tilt - Intermediate 17.7 in
    BLADE: Blade Width - Intermediate 115 in
    BLADE: Maximum Angle (either side) - Intermediate 25°
    Tractor Height - LGP 108.9 in
    Overall Length - With Blade - LGP 167.8 in
    Note *Abrasion Undercarriage

    Dimensions 

    BLADE: Blade Width at Maximum Angle - Standard  95.2 in
    BLADE: Digging Depth - Standard  22.5 in
    BLADE: Blade Width - Standard  104.2 in
    BLADE: Blade Lift Height - Standard  28.7 in
    Ground Clearance - Standard  13 in
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58°
    Tractor Height - Standard  108.9 in
    Length - Basic Tractor - Without Blade - Standard  129.6 in
    BLADE: Maximum Angle (either side) - Standard  25°
    BLADE: Maximum Tilt - Standard  14.5 in
    BLADE: Blade Capacity (SAE) - Standard  1.99 yd³
    Track Gauge - Standard  58.9 in
    BLADE: Blade Height - Standard  35.8 in
    Width - Tractor - Standard Shoes - No Blade - Standard  74.8 in
    Overall Length - With Blade - Standard  168 in