here?

R1700G Underground Mining Loader

R1700G Underground Mining Load-Haul-Dump (LHD) Loader

R1700G Underground Mining Loader

Learn More About This Piece of Equipment

360° Views

Product Specs

Standards

Standards
ROPS/FOPS Certified Cab

Engine

Gross Power - Tier 3 Engine - SAE J1995 (1st-3rd Gear/4th Gear)
242/263 kW (324/353 hp)
Gross Power - SAE J1995
353HP
Note (4)
Optional Ventilation Reduction package available.
Note (3)
Engine derate will commence at an altitude of 3050 m (10,006 ft).
Note (2)
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 inHg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Note (5)
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Gross Power - Equivalent to U.S. EPA Tier 3/EU Stage IIIA - SAE J1995 (1st-3rd gear/4th gear)
242/263 kW (324/353 hp)
Note (1)
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Engine Model
Cat® C11
Rated Power
1800r/min
Bore
5.1in
Stroke
5.5in
Displacement
680in³
Gross Power - VR Engine - SAE J1995
353HP

Operating Specifications

Nominal Payload Capacity - Tramming
30865lb
Nominal Payload Capacity - Truck Loading
27558lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal
70065lb
Static Tipping Load - Full Turn - Lift Arms Horizontal
57995lb
Breakout Force - SAE
46051lb
Gross Machine Mass - Tramming
120151lb
Gross Machine Mass - Truck Loading
116845lb
Nominal Payload Capacity
27558lb

Weights

Loaded - Tramming
115743lb
Empty
84878lb
Loaded
112436lb
Empty - Front Axle
37346lb
Empty - Rear Axle
47532lb
Loaded - Front Axle
81741lb
Loaded - Rear Axle
30695lb

Bucket Capacities

Bucket Capacity
4.6-8.8 m³ (6.0-11.5 yd³)
Dump Bucket - 1
6yd³
Dump Bucket - 2
6.5yd³
Dump Bucket - 4
8.6yd³
Dump Bucket - 5
9.5yd³
Dump Bucket - 6
11.5yd³
Ejector Bucket
7.5yd³
Dump Bucket - 3 - Standard Bucket
7.5yd³

Hydraulic Cycle Times

Raise
6.8s
Dump
2.9s
Lower, Empty, Float Down
2.4s
Total Cycle Time
12.1s

Turning Dimensions

Outside Clearance Radius**
270.8in
Inner Clearance Radius**
127.1in
Axle Oscillation
Articulation Angle
44°
Note
**Clearance Dimensions are for reference only.

Transmission

Reverse - 3
10.2mile/h
Reverse - 4
15.7mile/h
Forward - 1
2.9mile/h
Forward - 2
5.2mile/h
Forward - 3
8.9mile/h
Forward - 4
15mile/h
Reverse - 1
3.4mile/h
Reverse - 2
5.8mile/h

Service Refill Capacities

Secondary Fuel Tank - If Equipped
117.8gal (US)
Cooling System
16.6gal (US)
Engine Crankcase - With Filter
8.98gal (US)
Front Differential and Final Drives
23.8gal (US)
Fuel Tank
150.3gal (US)
Hydraulic Tank
33gal (US)
Rear Differential and Final Drives
23.8gal (US)
Transmission
12.4gal (US)

Tires

Tire Size
26.5 × 25

Equipment

  • Electrical
    • 12V Power Supply in Cab
    • Alternator, 95-amp
    • Auxiliary Start Receptacle
    • Battery Disconnect Switch, Ground Level
    • Circuit Breaker, 80-amp
    • Corrosive Protection Spray
    • Diagnostic Connector
    • Electric Starting, 24-volt
    • Engine Shutdown Switches
      – Rear Right Hand Side
    • External Lighting System, Front, Rear, Halogen Work Lights
    • Low Maintenance Batteries
    • Reversing Alarm
    • Starting and Charging System
  • Operator Environment
    • Cat Electronic Monitoring System (Cat EMS)
    • Electric Horns
    • Gauges
      – Engine Coolant Temperature
      – Transmission Coolant Temperature
      – Hydraulic Oil Temperature
      – Fuel Level
      – Speedometer
      – Tachometer
    • Indicator Lights
      – Alert Warning Light
      – Residual Brake Pressure
    • Low Hydraulic Level Warning
    • Open Operator Station ROPS/FOPS Structure
    • Operator Presence System (Auto Park Brake)
    • Pilot Hydraulic Implement Controls, Single Joystick
    • Push Button Panel for Lights
    • Suspension Seat with Retractable Seat Belt
    • STIC Steering
  • Power Train
    • Cat C11 Diesel Engine, ATAAC, 6 Cylinder
    • Brake Axle Cooling
    • Electric Fuel Priming Pump
    • Engine Air Intake Precleaner
    • Engine Oil Filter, Remote Mounted
    • Fuel System Manual Shut Off Tap
    • Heat Shields
    • Long Life Coolant
    • Planetary Powershift Transmission with Automatic Shift Control, 4 Speed Forward/4 Speed Reverse
    • Radiator, Cross Flow
    • Radiator Cap Manual Release
    • Rims, 5-Piece, Tubeless
    • SAFR Full Hydraulic Enclosed Wet Multiple-Disc Brakes
    • Torque Converter
    • Transmission Neutralizer
    • Transmission Filter Drain Tap
  • Other Standard Equipment
    • Brake Light
    • Bucket Control Group, Standard
    • Bucket, Dump
    • Bucket Lip
    • Bucket Positioner, Return To Dig
    • Catalytic Exhaust Purifier/Muffler Group
    • Decals, International Picto Graphics
    • Engine and Transmission Belly Guards
    • Fenders, Front, Rear
    • Firewall
    • Fuel Lines Double Braided (Stainless Sleeving)
    • Hand Hold (Access On/Off Top Deck)
    • Hydraulic Oil Cooler – Swing Out Rear Frame
    • Operation and Maintenance Manual – English and other applicable local languages to select
    • Protection Wear Bars 100 × 50 mm (4 × 2 in)
    • Rims, 5-Piece, Tubeless
    • Semi Centralized Lubrication Points
    • S·O·S Port
      – Coolant
      – Engine Oil
      – Hydraulic Oil
      – Transmission Oil
    • Swing Out Radiator Grill
    • Tires and Rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

Optional Equipment

  • Optional Equipment
    • Battery and Engine Shutdown Switch
      – Ground Level Isolation, In Cab Isolation Switch
    • Brake Pressure Gauges
    • Brake Release Arrangements, (Requires Lines Steering Release)
      – Recovery Hook
      – Recovery Bar
    • Buckets
      – Bucket, Light Weight Material (8.8 m³/11.5 yd³) (Requires Control Group, Heavy Duty)
      – Ejector Bucket Installed
      – Various Sizes, Dump (4.2 m³/5.5 yd³ to 7.3 m³/9.5 yd³), Ejector (5.7 m³/7.5 yd³)
    • Bucket, Control Group, Heavy Duty (Required for Light Weight Buckets)
    • Bucket Hardware
      – Cutting Edge, Bolt-On Half-Arrow (BOHA)
      – Cutting Edge, Cat Weld-on
      – Cutting Edge, Half Arrow, Flat
      – Heel Shrouds, Ejector and Dump Buckets
      – Mechanically Attached Shrouds (MAS)
      – Mechanically Attached Wear Plate System, Cutting Edge Protection (MAWPS)
      – Mechanically Attached Wear Plate System, Bottom Protection (MAWPS)
      – Protector Pads (Bottom of Bucket)
      – Wear Bars, Ejector and Dump Buckets
      – Wear Liner (5.7 m³/7.5 yd³ Dump Bucket)
    • Bucket Lip
      – Lip Fully Welded or Tack Welded
      – Lip Bare (No Hardware)
      – Bolt-On Ready
      – MAS Ready (Mechanically Attached Shrouds)
    • Camera, Color Rear Facing
    • Cover, Anti Vandalism for Shipping
    • Draw Bar Attachment, Bolt-on
    • Engine Options
      – Engine, Ventilation Reduction (VR)
      – Equivalent to Tier 3
      – After-treatment options (for use with VR Engine only)
      • DPF (Flow Through) Filter
    • Fast Fill System
      – Coolant
      – Engine Oil
      – Fuel (Single or Dual Tanks)
      – Hydraulic Oil
      – Transmission Oil
    • Fire Suppression System
      – Ansul, Dry Powder
      – Foam, Water Based
    • Front Light Protectors
    • Fuel System
      – Dual Fuel Tanks
    • Guards
      – Guard, Rear Side Quarter Window
      – Guard Duo Cone Seal
    • Handrails
      – Fold Down
    • Hydraulic System
      – Ejector Bucket Ready
      – Alternate Implement/Pilot Control Configuration
    • Lubrication System
      – Automatic
      – Centralized
    • Lighting
      – External Lighting System, Front, Rear, LED Work Lights
    • Mine Transfer
      – Mine Transfer Ready Rear Frame (Tack Welded)
      – Lifting Group, Mine Transfer
    • Operators Station ROPS/FOPS Enclosed
      – Air Conditioning
      – Cab Pressurizer and Filter
      – Duct, Window Demister
      – Dome Light
      – Heater
      – Radio Ready Compartment for Radio and Speakers
      – Strut, Cab Door
    • Operators Station FOPS Open
      – Removable Canopy
    • Park Brake Switch Engagement
      – Push to Apply
      – Pull to Apply
    • Payload Control System
      – Loadrite L2180
    • Remote Control Interface (excludes Transmitter and Receiver)
      – Cattron
      – RCT
    • Reversible Steering
    • Reflective Tape
    • Ride Control System
    • Rim
      – Rim Identification Numbering
      – Spare (Tube or Tubeless)
      – Tube Type
    • Seats
      – Seat Covers, Tee, Air and Standard
      – Suspension Seat Tee, Vinyl
      – Suspension Seat Tee, Air
      – Suspension Seat Air Vinyl
    • Secondary Steering System
    • Service Tools
      – Recovery Bar (for use with Brake Release, Recovery Bar System)
      – Reference Parts Manual for Additional Tooling Available
    • Switches
      – Additional Engine Shutdown, Mounted LHS
      – Engine Shutdown, Fire Suppression Activation
      – Idle Timer
      – Engine Shutdown/Idle Timer
      – Transmission Neutralizer Override Switch
    • Technology
      – Command for Underground
      – Vital Information Management System (VIMS) Gen 3
    • Tire Arrangements
      – Tire, 26.5 × R25, VSMS2 L5 Bridgestone
      – Tire, 26.5 × 25, VSDL, Bridgestone
      – Tire, 26.5 × 25, 32 Ply, Goodyear
    • Wear Protection Bars
      – Cab/ROPS
      – Hydraulic Tank
      – Radiator
      – Wear Plate, Rear Underneath
    • NOTE: Not all features are available in all regions. See your Cat dealer for more information.

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations