930M Small Wheel Loader

Studio Shot

930M Small Wheel Loader

The Cat 930M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Learn More About This Piece of Equipment

Videos
M Series Small Wheel Loaders at Work M Series Small Wheel Loaders Overview Built in Quality: Cat® Small Wheel Loaders Manufactured in Clayton, NC Safety and Service Overview | Cat® 926M, 930M, 938M Small Wheel Loader Kick-Outs, Snubbing, Wrap-Out and Soft Detents | M Series Small Wheel Loader Operator Tips Secondary Display Navigation | M Series Small Wheel Loader Operator Tips Preventative Maintenance | M Series Small Wheel Loader Operator Tips Coded Start Feature/Individual Operator Profiles | M Series Small Wheel Loader Operator Tips Creeper Control | M Series Small Wheel Loader Operator Tips Rim Pull | M Series Small Wheel Loader Operator Tips Efficient Hystat Operation | M Series Small Wheel Loader Operator Tips Throttle Lock | M Series Small Wheel Loader Operator Tips Fine Mode Control and Perfect Parallelism | M Series Small Wheel Loader Operator Tips Quick Steer | M Series Small Wheel Loader Operator Tips Power Train Modes | M Series Small Wheel Loader Operator Tips Cab Controls and Features | M Series Small Wheel Loader Operator Tips Hydro-mechanical Applications | M Series Small Wheel Loader Operator Tips Third and Fourth Auxiliary Flow | M Series Small Wheel Loader Operator Tips Reversing Fan | M Series Small Wheel Loader Operator Tips Customize Your Experience | M Series Small Wheel Loader Operator Tips Tire Pressure Monitoring System | Cat® 926M, 930M, 938M Small Wheel Loader Cat® Production Measurement (CPM) | M Series Small Wheel Loader Operator Tips Differential Lock | M Series Small Wheel Loader Operator Tips

Benefits & Features

Product Specs

Weights

Operating Weight
31144lb

Buckets

Bucket Capacities
2.5-2.7 m3 (3.3-3.5 yd3)

Engine

Maximum Rated Gross Power: ISO 14396
164hp
Rated Net Power
157hp
Maximum Rated Gross Power: ISO 14396 (DIN)
166hp
Maximum Rated Gross Power – Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800rpm
Maximum Rated Gross Power – ISO 14396 (Performance Power Mode: Range 1-4)
164hp
Maximum Rated Gross Power – ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
166hp
Rated Net Power at 1,800 rpm – SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
157hp
Engine Model
Cat® C7.1 ACERT™
Rated Net Power at 1,800 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
160hp
Rated Net Power at 1,800 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
162hp
Maximum Gross Torque – ISO 14396 (Performance Power Mode: Range 1-4)
592lbf-ft
Maximum Net Torque – SAE J1349 (Performance Power Mode: Range 1-4)
566lbf-ft
Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
572lbf-ft
Maximum Rated Gross Power – Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600rpm
Maximum Rated Gross Power – ISO 14396 (Standard Power Mode: Range 1-3*)
160hp
Maximum Rated Gross Power – ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
162hp
Rated Net Power at 1,600 rpm – SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
154hp
Rated Net Power at 1,600 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156hp
Rated Net Power at 1,600 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158hp
Maximum Gross Torque – ISO 14396 (Standard Power Mode: Range 1-3*)
592lbf-ft
Maximum Net Torque – SAE J1349 (Standard Power Mode: Range 1-3*)
566lbf-ft
Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
572lbf-ft
Displacement
427in3
Bore
4in
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Stroke
5in
Note
* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note
Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Maximum Gross Power
164hp

Steering

Steering Cylinder: Double Acting – Bore Diameter
2.8in
Steering Cylinder: Double Acting – Rod Diameter
1.6in
Steering Cylinder: Double Acting – Stroke
17.2in
Maximum Flow – Steering Pump
34gal/min
Maximum Working Pressure – Steering Pump
3500psi
Maximum Steering Torque – 0° (Straight Machine)
37155lbf-ft
Maximum Steering Torque – 40° (Full Turn)
27747lbf-ft
Steering Cycle Times (Full Left to Full Right) – Minimum RPM: Pump Flow Limited
2.8seconds
Steering Cycle Times (Full Left to Full Right) – Maximum RPM: 90 rpm Steering Wheel Speed
2.4seconds
Note
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Loader Hydraulic System

Maximum Flow – Implement Pump
50gal/min
Maximum Flow – Implement Pump: 3rd Function Maximum Flow*
50gal/min
Maximum Working Pressure – Implement Pump
3626psi
Relief Pressure – Tilt Cylinder
4061psi
Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure
3626psi
Relief Pressure – Tilt Cylinder: 3rd Function Relief Pressure
4061psi
Lift Cylinder: Double Acting – Bore Diameter
4.7in
Lift Cylinder: Double Acting – Rod Diameter
2.6in
Lift Cylinder: Double Acting – Stroke
28.7in
Tilt Cylinder: Double Acting – Bore Diameter
5.9in
Tilt Cylinder: Double Acting – Rod Diameter
3.5in
Tilt Cylinder: Double Acting – Stroke
21.9in
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Raise (Ground Level to Maximum Lift)
5.1/5.7 seconds
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Dump (at Maximum Lift Height)
1.5/1.7 seconds
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Float Down (Maximum Lift to Ground Level)
2.7/2.7 seconds
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Total Cycle Time
9.3/10.1 seconds
Note
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
Note
* 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.

Service Refill Capacities

Fuel Tank
51.5gal
Cooling System
7.9gal
Engine Crankcase
5.3gal
Transmission (Gear Box)
2.2gal
Front Axles
6.9gal
Rear Axles
6.6gal
Hydraulic System (Including Tank)
43.6gal
Hydraulic Tank
23.8gal
Diesel Exhaust Fluid (DEF) Tank
5.0gal

Transmission

Forward and Reverse: Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse: Range 2
8mph
Forward and Reverse: Range 3
17mph
Forward and Reverse: Range 4
25mph
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Cab

ROPS
ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
Declared Sound Levels
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Note
* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl
Note
The Blue Angel environmental label is an optional attachment for Europe only.

Operating Specifications

Full Turn Tip Load
19563lb

Power Train

Front Axle
Fixed
Front Axle: Traction Aid**
Locking differential (standard)
Rear Axle
Oscillating
Rear Axle: Oscillation Angle by Tire Size – 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Rear Axle: Traction Aid (optional)
Limited slip differential
Brakes: Service
Inboard wet disc
Brakes: Park
Spring applied hydraulically released
Note
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note
Offset rims available to meet European roading requirements.
Note
**Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.

Worktool Attachments

Equipment

  • Power Train
    • Axle seal guards
    • Auto idle shut down feature
    • Cat C7.1 ACERT engine: – Power Modes (Standard and Performance) – Power by Range (High Power in Range 4) – Turbocharged and aftercooled – Filtered crankcase breather – Diesel particulate filter (Fit for Life)
    • Coolant protection to –34° C (–29° F)
    • Differential lock in front axle
    • Dry type air cleaner
    • Enclosed wet disc full hydraulic brakes
    • Fuel priming pump, automatic
    • Fuel water separator
    • Hydraulically driven demand cooling fan
    • Intelligent hydrostatic transmission: – Power train modes – Directional Shift Aggressiveness – Rimpull control, adjust wheel torque – Creeper control, adjust ground speed
    • Lubed for life driveshafts
    • Parking brake, electric
    • Wide spaced 6 fins per inch cooling package
    • S·O·SSM sampling ports
    • Throttle lock and maximum speed limiter
  • Hydraulics
    • Automatic lift, lower and tilt kickouts
    • Bucket and Fork Modes, adjustable in-cab
    • Cylinder damping at kickout and end stops
    • Fine Mode control in Fork Mode
    • Hydraulic Response setting
    • Load sensing hydraulics and steering
    • Seat-mounted hydraulic joystick controls
  • Electrical
    • Alternator, 115-amp, heavy duty
    • 12V power supply in cab (2)
    • Batteries, 1,000 CCA (2) 24 volt system
    • Back-up alarm
    • Emergency shutdown switch
    • Heavy duty gear reduction starter
    • Product Link PRO with subscription
    • Remote jump start post
    • Resettable main and critical function breakers
  • Operator Environment
    • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • Cab, enclosed and pressurized
    • Cup holders
    • External heated mirrors with lower parabolic
    • Ground level cab door release
    • Gauges: – Digital hour meter, odometer, tachometer, ground speed and direction indicator – Engine coolant temperature gauge – Fuel and Diesel Exhaust Fluid level – Hydraulic oil temperature gauge
    • Hydraulic control lockout
    • Interior cab lighting, door and dome
    • Interior rearview mirrors (2)
    • Lunch box storage
    • Operator warning system indicators
    • Radio ready speakers
    • Rear window defrost, electric
    • Seat-mounted controls, adjustable
    • Sliding glass on the side windows
    • Column mounted multi function control – lights, wipers, turn signal
    • Suspension seat, fabric
    • Tilt and telescopic steering wheel
    • Wet arm wiper/washer, front and rear
  • Other Standard Equipment
    • Large-access enclosure doors
    • Parallel lift loader linkage
    • Recovery hitch with pin
    • Remote mounted lubrication points
    • Lockable compartments and enclosures

Optional Equipment

  • Antifreeze/coolant, extended-life
  • Auto lube, integrated in secondary display
  • Auxiliary flow, third function
  • Axles, differential, limited slip, rear
  • Axles, elevated breathers
  • Beacon light, strobe
  • Cab, Deluxe (standard In Europe):
    • Automatic blower control
    • Electrically adjustable heated mirrors (2)
    • LED interior lighting
    • Secondary display to adjust settings
  • Ride control adjustable speed activation
  • Preventative maintenance reminders
  • Integrated help function (22 languages available)
  • Sunscreen, front and rear
  • Camera, rearview (standard in Europe)
  • Cold Start Package:
    • Ether starting aid, block heater and additional batteries 1,000 CCA (4 in total)
  • Coupler, (Fusion and ISO 23727)
  • Debris packages (low, medium, high)
  • Fenders (extended cover and full coverage)
  • Guards
    • Power train, (lower, side, driveshaft and crankcase)
    • Windshield and lights
    • Cylinders, tilt and steering
  • Lights, auxiliary, halogen or LED with engine compartment lights
  • Rear Object Detection
  • Radio Packages:
    • Radio ready with Bluetooth
    • Radio, AM/FM with Bluetooth and clock
    • Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock
  • Seats:
    • Deluxe seat – fully adjustable fabric air suspension seat with high seat backrest
    • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.
  • Steering:
    • Dual mode and Secondary
  • Tires:
    • Bias ply, 17.5, 20.5-25
    • Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25
  • Work tools

Interested In This Product?

Call Fabick
1 (800) 845-9188

Dial Your Nearest Location:

800-845-9188
Fabick MO & IL
414-461-9100
Fabick WI & MI
View All Locations